1968 Ford F-800 Wheel Liners

There is no difference between the front and rear covers that come with the #WM3165B0. Each one is the same as the #NA7165B1 which fits the front or the rear.

Hi Thien, From what I saw a 2017 Ford E450 chassis does use the same 16x6 wheel with an 8 on 6-1/2" bolt pattern, so the correct fit is the Steel Dual Wheel with Offset - 16" x 6" Rim - 8 on 6.5 - 4.75" Pilot - Silver #AM83NR.…

The only difference between the Dexter Electric Trailer Brake Assembly part #23-181 for right hand or part #23-180 for left hand and the Dexter Nev-R-Adjust Electric Trailer Brake Assembly part #23-465 for right hand or part #23-464 for left hand is…

Hi Josh; I think the B&W Companion #BWRVK3300 is the best option for your 2025 F-350. The Companion will give you a great towing experience worthy of your new truck. It has 1" thick dual jaws for a solid connection and a non-binding…

The Wheel Masters Tire Pressure Valve Extenders - 180-Degree Bend - Aluminum Rear Wheels - Qty 2 #WM8029180 are a great option but for a little more accessibility it sounds like you'd prefer something more like the Wheel Masters 2-Hose Inflation…

While we do carry great extenders for your dually 2016 Ford F-350, we do not carry any extenders with a single inflation point that inflates both tires simultaneously. However, we do have a great option that involve easily-accessible valves for…

Those look a lot like the Lynx wheels such as those found in tire and wheel combo #LHAS701. If your wheels have a 4.9 inch center hole diameter you can use #490EZ-SS, #AM90156C, #LHCS109, or #LHCS109-SI60C. If you have a different size pilot hole let…

The Replacement Center Cap for 16" Aluminum Viking Series Wheels #CXF105B will fit a 16" diameter, 8-lug wheel with a 4.9" pilot hole. It was just designed around the 16" Aluminum Viking Series Wheels like what comes with the…

Hello David. I can definitely help point you in the right direction. Does your 2022 F250 have the OEM 5th wheel prep package in the bed? Post in the comments below and let me know because that will be a major deciding factor in selecting a hitch. If…

The height setting will be based on what allows your trailer to be towed level. The forward and back position is for additional trailer overhang to cab clearance. If you need more clearance run the rear positition, if not forward would be fine.

I can confirm for you that there is a difference between the #BWRVK3300 and the #BWRVK3305 with the construction of the base of the hitch, which is where you get the difference in capacities between the two hitches. The 3300 is only rated for…

If you have the B&W Companion 5th wheel hitch #BWRVK3500, which is intended for installation in a square-shank B&W install kit like #BWGNRK1111-5W, then this hitch cannot be installed in the Ford OEM puck system. B&W makes a Companion…