Vehicle Trim Specs:
Videos
for Vehicle Trim
Help Articles
for Vehicle Trim
Expert Answers
for Vehicle Trim
Hey Matthew, welcome back! Yes the WeatherTech SillProtector #WT22SP will fit your 2026 Toyota Tacoma SE Double Cab. These are a custom fit and use adhesive tape for installation. They'll keep your door sills from getting scratched up, and come…
view full answer...Hey Thomas, since you have a 2026 Ford F-150 you will have to go with the new base plate kit part #BLU33FR. While this does look a lot like the kit you have now the mounting holes are located a little differently. Now is there a way to make what you…
view full answer...Hey Steven, thanks for reaching out. Yep, we sure do. For your 2026 Subaru Crosstrek Wilderness I recommend the following Curt hitch: - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C54GJ This hitch is designed specifically for the…
view full answer...Hey Nicholas, thanks for the pics and information. To replace your Dometic Brisk II 9105304474 AC, I recommend the Advent Air RV Air Conditioner System item #ADV92SR in white or item #ADV62SR in black. There's no way to just replace your AC unit…
view full answer...Hey Mike, thanks for reaching out. Yes, it will! The Curt Mounting Bracket for 4-Pole Flat Trailer Connector #C42CR will match right up with the Curt No-Drill Bracket #C57202. You won't have to drill any new holes. The picture I included shows…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Hey Dennis, thanks for reaching out. Yes we do have a braket for attaching the 4-flat plug to the car. For that I recommend the following: - Curt Mounting Bracket for 4-Pole Flat Trailer Connector #C42CR What most people do it use self-tapping screws…
view full answer...Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…
view full answer...I went out to our warehouse and measured the Buyers Products 45 Ton Pintle Hook #337PH45 for you. The mounting platform where the holes are drilled, has a thickness of 0.7 inches.
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Welcome back, Tom! The MORryde Replacement Wet Shoulder Bolt - 9/16" x 3-3/8" - Qty 1 #MR52HR will definitely work for you, but are you measuring just the threaded portion or the actual shank of the bolt? I ask as the threaded portion of…
view full answer...Hey Edwin! If the listed dry tongue weight is 1,330 lbs you will likely be over the rating of your current SwayPro spring bars. You'll probably be adding 150-200 lbs with the propane and batteries, but that does depend on the number of propane…
view full answer...
Filters
