Allen Camper Idle Time Fifth Wheel RV Covers

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY38FR that you referenced.

I looked up the Sunset Park RV Sun-Lite 16BH and the official length is listed at 16' 6" therefore in order to find the correct cover we'll need to subtract 3' for the tongue and round up which means we're looking at a cover for…

Hey James, between all of the storage covers you mentioned the best option is the etrailer part #e57VV would be your best option for the best UV protection. This also installs easily and fits great too.

To determine the correct size RV storage cover for your Coleman Lantern LT Travel Trailer you'll need to measure the body length. In the attached picture below you'll see exactly how to measure. Once you have this measurement you can choose…

Hey Tobin! The Camco item #CAM45771 is going to be a bit short for your 2024 Palomino 750 but I have an identical one that will work. It is the Camco UltraGuard Slide-In Camper Cover item #CAM45773. This ones 18' long and has the same features.…

Hello again Joe; the etrailer RV Cover for Travel Trailers #e97VV does have zippers to allow access with the cover on which can be seen in the video attached below. This will work as long as you measured correctly. You need to measure the body of the…

Typically when measuring campers for a storage lot cover we recommend measuring from the rear to front, not including the propane tanks, battery, or trailer tongue. That being said, you can still order a larger cover to also cover the trailer tongue…

I was able to find some dimensions of your Lance 825 Truck Camper, and since it is 16'3" and 8' tall I recommend the Adco SFS AquaShed Truck Camper Cover #290-12264 as it measures 17-3/4' long x 8-11/16' wide x 8-11/16' tall…

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

Hey Bennett, The etrailer RV Cover for Travel Trailers #e37VV is made of polypropylene, which is waterproof, rip-resistant, and breathable so that moisture can wick off of the cover and trailer walls and prevent mold growth.

Hey Mike, Whether or not you have to measure the height of AC, or add a 1' to length, is going to depend on the manufacturer/model of the cover. Covercraft says not to account for the AC since they've already designed to cover to accommodate…