Off Road Lights Specs:
Features:
With these halogens, you get HID-like effects for your vehicle's headlamps. The replacement bulbs shine with a pure white hue compared to the yellowish tint of your OEM lights, and they have an 800-hour bulb life.
More Information >Off Road Lights Specs:
Features:
Shed light on dimly lit roads with these halogens for your vehicle's headlamps. The replacement bulbs shine with an HID-like, bright white hue compared to the yellowish tint of your OEM lights, and they have an 800-hour bulb life.
More Information >Vehicle Lights Specs:
Features:
Improve light output and reduce eye fatigue with these DOT-compliant, bright white halogen headlight bulbs. Replacement bulbs deliver greater visibility than factory bulbs.
More Information >Vehicle Lights Specs:
Features:
High-power CSP LEDs provide 5,000 lumens of bright white light to upgrade your factory halogen headlight bulbs. Miniature capacitors remove need for external anti-flicker module. Precision terminal system ensures fit with existing OEM harness.
More Information >Videos
for Vehicle Lights
Help Articles
for Vehicle Lights
Expert Answers
for Vehicle Lights
So I have your hub narrowed down to a few different possibilities but we need to know what your bolt pattern is to know for sure. We have the part #84556UC3 for if your bolt pattern is 5 on 5 inch. We have the part #845476UC3 for if your bolt…
view full answer...A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will…
view full answer...The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…
view full answer...Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...For your 4x6 utility trailer, I recommend using the Taskmaster 4.80R12 Radial Trailer Tire part #TT48012C. This tire has a radial ply construction which will be better for the longer highway trips you intended to make. It has a load range C rating…
view full answer...There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item #350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a…
view full answer...On equalizer 013-105-04 in kit #K71-360-00 the eye center to eye center measurement is approximately 7-1/2 inches.
view full answer...The 18.5x8.5-8 is actually an old tire size that is not used much anymore. The closest metric size to your existing tire would be 215/60-8. Your wheel most likely has a 5-on 4-1/4 inch bolt pattern (see link), you will want to make sure that the…
view full answer...I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…
view full answer...The Dexter 8-427 hub is no longer available. Even looking through…
view full answer...