Custom Fit 2023 Toyota Sienna Accessories

The best hitch for a 2024 Toyota Sienna is the Curt item #C22UR. This hitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 350 lbs maximum…

Hi Anthony; the forces applied to the #C22HR hitch and the frame from a vertical hanging bike rack (bike racks that require the bicycles to be hung / mounted vertically) are different from your standard platform rack like the #HLY94FR or hanging bike…

Hey Matthew, out of the three hitches you're going to want the Curt Trailer Hitch Receiver #C22UR. This one sits the highest off the ground at 11" from the ground to the bottom of the receiver. Still not super high up, but not terribly low…

Hello Nick, thanks for reaching out. To answer your first question, coil helpers like the Firestone #F4155 will not raise your Sienna beyond the factory ride height. If the hitch and bike rack are causing some squatting, the air bags will help to…

Between the etrailer #e56RR and Draw-Tite #DT55MR for your 2024 Sienna I would choose the etrailer hitch. The only major differences between the two hitches are the capacity and the powder coat finish. It is true that the Draw-Tite has a higher…

Hello Juan, Congrats on the new ride! We have 2 options for suspension enhancement for your 2025 Toyota Sienna. The Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Rear Axle #CSS-1168R, and the Firestone Coil-Rite Air Helper…

It sounds like you are needing a replacement lock core and mounting hardware for your Sears Sport 20-SV. If this is not what you are needing, let me know and I will find you the correct parts. If this is what you are needing, then we have the parts…

The only hidden hitch for the 2022-2024 Sienna is Draw-Tite 76928 which is on extended backorder. This cannot be used with weight distribution. I recommend installing the etrailer #e56RR which is compatible with a WDH. This has a matte black finish…

Thank you so much for the info and pictures! The correct replacement key for your lock for is part #THKEYN2982 and the correct replacement mounting hardware is part #TH05603. The mounting hardware does look a little different than the original…

Hey Aaron, great question. The ground definitely should get reinstalled after the install of the Curt trailer wiring harness part #C53VV. I am not sure why they left that part off but it must have been an oversight.

As far as the Curt hitch #C22UR and the Draw-Tite #DT55MR, we unfortunately haven't had a chance to install the hitches yet. With that being said, we do not have the precise ground measurements when fitted onto a 2021 Toyota Sienna. However, both…

The Curt #C22UR and Draw-Tite #DT55MR are fairly similar in design, with the major difference between the two being their weight capacities. The Curt has a 3,500lb GTW and 350lb TW capacity while the Draw-Tite has a 4,500 GTW and 675lb TW capacity.…