Hey Delbert, thanks for reaching out! Yes, the Andersen Weight Distribution Hitch w Sway Control #AN53VR can be used for a lighter trailer like what you have. You'll just need to adjust the system to accommodate your weight and you'll be good…
I would be happy to help narrow down the choices to the best hitch for your 2021 Ram 1500 Classic Warlock edition. Since your main purpose will be for accessories, I recommend the etrailer Hitch Receiver item #e98852. This hitch is custom fit and…
The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…
Hey Charles, the easiest solution would be the Curt part #C55384. This plugs inline with your 7-way and gives you a 4-way on a wiring harness independent of the 7-way socket so it wouldn't get affected if your 7-way was open.
The smallest diameter 13 inch trailer wheel and tire will have a diameter of 24.1 inches (ST175/80-13). There are 3 common 12 inch trailer tire sizes: 4.80-12 has a diameter of 20.5 inches, 5.30-12 has a diameter of 21.9 inches, and 145/80-12 has a…
Hey Ryan, the bracket kit part #PF1135-BKT-2 is normally the best solution as long as the trailer has a frame rail that runs the perimeter of it. Then if the frame is 2 inches wide you would want the part #CE15284GA and you'd be set. The other…
Your picture didn't make it through but it sounds like you would like to upgrade your tire and wheels on your trailer. You may substitute a 14 inch tire and wheel as long as you have both the wheel well height and width clearance for it, the…
I have a solution for you that will allow you to make an adapter, but we do not sell one pre-made. To adapt your 9-pin trailer plug to work with the 7-way connector on the truck, you would need the 9-pin vehicle side connector that you referenced,…
The etrailer brand #e98852 and the Draw-Tite #75662 are almost identical. The capacities are the same, they'd both install in the same manner and they're very similarly priced. There are a few differences. The biggest difference is that the…
The Dometic CDMW12S requires a 20.39" wide x 14.52" tall x 16.02" deep opening in order to fit so the closest option we currently offer is going to be the High Pointe Standard RV Microwave #HP59ZR (19.1” wide x 11.5” tall x 14.8”…
No, according to Curt's fitment chart the Curt Trailer Hitch Receiver #13333 would be the correct fit for your 2021 Ram 1500 Classic Warlock instead of the #C13419 that you referenced. I've attached a short video below where Rob will walk you…
We have the #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter #TRU37FR and the #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter #TRU57FR which are both compatible with 7,000 lb axles. Both…
