2017 Nissan Armada Trailer Wiring
2017 Nissan Armada Brake Controller
2017 Nissan Armada Towing Mirrors
2017 Nissan Armada BOLT brand vehicle and hitch locks
2017 Nissan Armada Roof Rack
2017 Nissan Armada Trunk Bike Rack
2017 Nissan Armada Air Filter
2017 Nissan Armada Suspension Enhancement
2017 Nissan Armada Transmission Cooler
2017 Nissan Armada Vehicle Lights
2017 Nissan Armada Tire Chains
2017 Nissan Armada Fluid Filters
2017 Nissan Armada Vehicle Sway Bars
2017 Nissan Armada Vehicle Snow Plows
2017 Nissan Armada Vehicle Engine Heaters
2017 Nissan Armada Cabin Air Filter
2017 Nissan Armada Lift Assist
2017 Nissan Armada Floor Mats
2017 Nissan Armada Vehicle Covers
2017 Nissan Armada Side Window Vents
2017 Nissan Armada Vehicle Tent
2017 Nissan Armada Vehicle Seat Covers
2017 Nissan Armada Windshield Wiper Blades
2017 Nissan Armada Windshield Covers
2017 Nissan Armada Vehicle Air Mattress
Videos
for Nissan Armada Owners
Help Articles
Expert Answers
Since you have a 2017 Armada the pre-wiring is on the right side of the steering column, above the accelerator (see pic). This is where you'll plug the part #3050-P into for the Prodigy P3 part #90195.
Setting the boost level on the P2 brake controller #90885 should actually be the last thing you do after you have set up the controller according to the instructions. Basically it is like you said: Set the controller with no boost to 6. Tow at about…
Since you have a 2017 Armada the pre-wiring is on the right side of the steering column, above the accelerator (see pic). This is where you'll plug the part #3050-P into for the Prodigy P3 part #90195. If you currently do not have any trailer…
The 2.5-Watt Solar Battery Charger #PTW2997 is a great option for your solar charging needs on the go, or for a much larger panel we have the 100 watt part #287-32408. This product will not completely supply the needs of your Furrion camera system…
Hey Amanda, this is a great question but basically the #ETBC7 is the #37185 with additional components needed to complete the charge circuit for the 7-way and also wire in a brake controller. So if all you need is a basic 4-way to 7-way adapter…
Yes, per the installation instructions, your 2014 Nissan Pathfinder with the Controller Area Network, or CAN Bus system, it is recommended by the manufacturer that you use the 30-amp circuit breaker kit #331-CBK30-EB. This, along with your Redarc…
Since your 2017 Nissan Armada does not have trailer wiring currently what you'll need is a hardwire style 4-way kit tested as a fit for your vehicle like the part #C59496. This taps into the taillight circuits of your vehicle to give you the…
They are the same controller as Reese and Tekonsha are made by the same company. The Tekonsha part #39510 does not come with the vehicle specific install harness part #3035-P which is custom fit for your 2003 Ford F-250/350.
There are a few differences between the Universal Installation Kit part #ETBC7 and the 7-Way RV Upgrade Kit part #ETBC7L. The biggest one is that part #ETBC7 comes with both the power and brake output wire you will need to run to the cab/battery…
Trailer brake controllers like the Prodigy P2 #90885 use a 4-wire hook up. The wire functions and connections are as follows: BLACK wire carries 12V power and connects to the vehicle + battery post through a 20- or 30-amp circuit breaker like…
The Brake Controller installation kit part #ETBC7 that you referenced actually includes the 7-way connector part #37185 that you referenced also so you would only want one or the other depending on the situation. If you have trailer brakes you would…
The MORryde X-Factor Dropdown Crossmember for Stock Leaf Spring Suspension item #MR84AR is going to shore up and support your Toy Hauler's frame like a sway bar on a vehicle. It will keep your trailer's suspension from buckling when making…
