Hey Joe, while I don't know what brake controller you have you should be able to unplug it from the back of the brake controller and that would accomplish what you are wanting. What brake controller do you have?
Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…
Part #57-378PK replaces the hardware and mounting brackets for a Westin HDX Grille Guard with model number #57-3780 and #57-3785, which are designed for a 2015-2019 Silverado 2500/3500, so it will not fit your truck. Hardware kits for grille guards…
For an air bag kit that fits your 2014 Chevy Silverado 1500 towing a fifth wheel trailer I would recommend the #AL57204 for if you have a short bed truck or the part #AL88211 for if you have an 8 foot bed. Now if you were to ask me what suspension…
Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…
Only a 7-way trailer connector will have a 12-volt power wire ran to the connector. A 4-way trailer connector will not have a constant 12-volt power wire. As long as the 12-volt power wire running to the 7-way trailer connector is rated for the…
Hello Drew, I'm glad that you wrote in. For your 2015 GMC Sierra 1500 you want part #RED26CR, this part number is the brake controller and the vehicle specific pigtail for you Sierra 1500. The #RED24FR you were looking is just the brake…
Yes, the correct etrailer Trailer Hitch for your 2014 Chevy Silverado 1500 is the one you mentioned: etrailer Trailer Hitch Receiver - #e98860 Attached is an installation video for you to check out.
The Curt TriFlex Trailer Brake Controller #C24VV does have a sleep mode that will not have any lights on when the controller is not being used. It sounds like you have a short somewhere in the brake wire that runs to the 7-way since your controller…
If the stock mirrors on your truck do not have power features then you will not be able to add them. The truck lacks the wiring and other proper electrical equipment to support power mirrors. I wish I had better news for you.
The 2500 and the 1500 models are different enough that the fits for the HDX guards do not transfer from one to other. Since the guards are made to fit the hardware kits you can't just swap hardware kits to fit a guard from one vehicle to other.…
Hello Russ, No, having the it lifted no more than 2" will not effect the fitment of the Hellwig Adjustable Rear Anti-Sway Bar - 1-1/8" Diameter #HE43GR, which is a great fit for your 2019 GMC Sierra limited 4x4. The bar is designed to…
