Videos
for Honda Accord Owners
Help Articles
for Honda Accord Owners
Expert Answers
for Honda Accord Owners
According to the online copy of your owner's manual, your 2013 Honda Accord Coupe has a maximum total trailer weight limit of 1,000 lbs. This includes the weight of the trailer, cargo, and everything inside or loaded on top of it. While CVT…
view full answer...I checked with Thule and they do list the OutWay trunk mount bike rack #TH45JV as a fit for sedan models of the 2013 Honda Accord. If you will be carrying any bikes that do not have a top frame tube that goes straight across I recommend using an…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I've attached a picture of each hitch installed just so you can see them. There's not a lot of difference. When we installed them both on a 2014 Honda Accord they both measure 11-1/4 inches from the ground to the inside of the receiver…
view full answer...Hello Richard. We do have an adapter, the Brophy Hitch Adapter #HT5R which may work very well for you. This will go in to the 1-1/4" receiver on your Camry and give you a 2" receiver with 5" of rise. It is very important to note that…
view full answer...The size of the install bolts that secure the Curt hitch part #C11681 to the rear of your 2015 Honda Accord are 7/16-14 x 1 1/4. These are included with the hitch as well as all of the other needed hardware to install the hitch. If for some reason…
view full answer...You'd have to get somewhat creative to install a motorcycle wheel chock like the part #TWSPWC3BT to a mesh floor trailer. Ideally I'd recommend you mount the chock to a piece of plywood and then mount the wood to the mesh floor or remove it…
view full answer...We have the correct replacement key for your Sears Sport 20-SV cargo box with an A118 lock core. You will want to use the Replacement Key for Thule Racks and Carriers #THKEYN118. Thule made the cargo boxes for Sears and therefore their keys work as a…
view full answer...I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…
view full answer...I have attached a chart for you to take a look at that includes the lug nut torque specifications. If your wheel uses 1/2 inch lug nuts or wheel bolts like the 12 Inch Steel Spoke Trailer Wheel #AM20124 referenced in your question, you will torque…
view full answer...We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. No drilling would be…
view full answer...Thank you so much for the info and pictures! The correct replacement key for your lock for is part #THKEYN2982 and the correct replacement mounting hardware is part #TH05603. The mounting hardware does look a little different than the original…
view full answer...