Custom Fit 2011 Toyota Tundra Accessories

I reached out to my contact at firestone to confirm a few things. If the compressor is running, it should be filling the bags. The compressor is either going to build air pressure, or not build pressure. So if it is running when the bags are full,…

In order to swap your surge brakes to electric over hydraulic, you're going to need to change out your actuator and add a proper brake controller. For an actuator I'd recommend going with the Hydrastar Electric Over Hydraulic Actuator…

I spoke with my contact at SuperSprings regarding SumoSpring kit #SSR-211-54. The springs themselves are 5 inches tall. The whole assembly when put together and installed is 6-1/4 inches tall.

In order to switch from slipper to double eye springs you'll need new hangers which are going to dictate your height so if you're looking to maintain the same height, you'd want to choose new hangers which are the same height…

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If…

All of our leaf springs like the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long #e28SR are sold individually. For a single axle you would need two.

I went out and pulled both the Timbren kit part #TTORTUN4 and #TTORTUN4L from our warehouse to measure them for you and found that they both sit exactly 3-3/4 inches tall.

The biggest difference between the Timbren and SumoSpring jounce-style springs is that the Timbrens tend to be a bit more stiff which is great for heavier loads but can make the unloaded ride on your 2021 Toyota Tundra a bit more harsh. The…

Since you're using a weight distribution (WD) system you should be able to simply swap out the shank for one that is longer like the 18" Equal-i-zer Weight Dist Shank #EQ90-02-4600. This is rated for 600 lbs - 1,400 lbs tongue weight…

We have all sorts of door and vent parts for all types of trailers. And we can help you find items specific for horse trailers too; just click on the link provided to see all categories of items for horse trailers. Next click on the heading Door…

Since the bracket is going to sit lower you'll want to measure from the bracket of the #LC184089 up to the mounting point on the camper to determine the exact size needed. For example, the front turnbuckles of the HappiJac Original…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…