Custom Fit 2011 Dodge Ram Pickup Accessories

You can easily identify if you have the crew cab or a quad cab by looking at the size of your rear doors. If they are the same size as your front doors, then you have a crew cab, if they are 3/4 the size then you have a quad cab. I have also included…

It sounds like you could have a set of standard fifth wheel rails that most manufacturers use for their fifth wheel hitches to install into. The different manufacturers all make their own brand of rail kit, but they all have basically the same…

I recommend the Equal-i-zer Weight Distribution #EQ37101ET for your 2019 GMC Yukon XL Denali hauling a Forest River Flagstaff weighing 8,300lbs with 830lbs of tongue weight. This hitch is rated for a trailer up to 10,000lbs with a tongue weight of…

The Reese 54917 is a 6" drop shank with a 10 1/4" rise, the Equal-i-zer Weight Distribution Shank #EQ90-02-4400 has a 13" rise and a 9" drop and has an overall length of 12".

While we don't have a replacement hardware kit we can offer you for the #BWGNRK1016 I did attach a picture that shows all of the hardware you'd need that you could source at a local hardware store. I also attached an install video link for…

I fell replacing your factory controller with an aftermarket controller is a better option, because aftermarket controllers tend to have less issues. With your 2015 Ford F-150 XLT having a factory controller you will need to have the ECU flashed…

Yes, but only the rear set of TorkLift Custom Frame-Mounted Camper Tie-Downs will need to be replaced when upgrading to the TorkLift SuperHitch Magnum Trailer Hitch Receiver part #TLD1102-30 from the factory trailer hitch on your 2011 Ram 3500. The…

I have a solution for you, but the TorkLift #TLD3109 are not compatible with with the SuperHitch #TLD1102 since the new SuperHitch's side plates are going to occupy the same spot where those old tie downs were previously installed. For this…

Hey Rick, yes the 24 shear spring part #MR95UR does fit in place of the 16 you have and it has a stiffer spring characteristic. This would be what you are looking for it sounds like. The higher the number the higher the weight capacity axles it is…

That is a tough question to answer as both are excellent manufacturers with their respective pros/cons. In regards to brake actuators, they both make and manufacture them here in the U.S.A. and they both come with a one year warranty. In regards to…

I went and pulled a Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 from our warehouse to determine the weight capacities and found that on the sidewall it was stamped Load Range D with a 2,150 lb capacity at 65…

Whatever bearing kit you got likely came with both to give you options. Since you already had a tang washer on your spindle you can stick with the tang washer. Using the tang washer like the #5-101 with a D washer like the #5-23 would give you no…