Custom Fit 2005 Dodge Ram Pickup Accessories

Yes, the Draw-Tite Trailer Hitch Receiver #DT45509 will fit your 2007 Dodge Ram 3500 with the factory hitch. This is a nice option, but I do recommend instead considering the Curt hitch: - Curt Trailer Hitch Receiver #C15809 While the Curt hitch…

At this time the Solera Smart Arm RV Awning Conversion kit part #LC759405 does come with end caps that attach to the awning roller. At one point it was left off like the review you mentioned but now they are for sure there.

The option that will work for your 2017 Cherokee 29TE depends on your axle diameter. For 2-3/8 inch axles, you will want the Dexter Trailer Springs Over-Under Conversion Kit, #K71-384-00. If you have a 3-inch diameter axle, you will want the kit,…

Yes, it will! The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches item #BWRVR3200 includes industry standard 5th wheel rails that are compatible with the Reese 30032 5th wheel hitch. The Reese 30032 uses the same…

Basically the biggest difference between a Lippert 1116 and a Lippert 1716 is that the 1716 extends out further than the 1116. The 1716 is considered a long pin box whereas the 1116 is considered a medium length. The length difference will be 5-3/4…

The Solera Smart Arm 12V Power RV Awning Conversion Kit #LC759405 comes with everything you'd need and would not require you to also purchase endcaps.

We have kits like the Solera Smart Arm 12V Power RV Awning Conversion Kit #LC759517 which is designed to convert Lippert, Solera, Dometic, and Carefree manual awnings to power awnings. The install is pretty simple and straight forward but we do not…

I spoke with my contact at Lippert regarding the existing Lippert 1716 Pin Box #LC1324791 on your trailer. He stated that you can actually replace the pin box with the Lippert 1116 Pin Box #LC1270271, which is shorter than what you have but uses…

The instructions call for the complete removal and relocation of a 20" spare tire so if your spare tire is a 35" then I have my doubts about it fitting. The only way a spare tire will fit with the Draw-Tite Hitch #DT45509 is if it's no…

We do likely have an air ride pin box that will work for you, but according to Andersen, the MorRyde rubber pin box is not compatible. The folks at Andersen tell me that pin boxes of this type allow too much lateral movement, which makes them…

The Demco Recon Slider 5th Wheel Hitch part #DM72MV that you referenced weighs 179 lbs.

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…