An In-Depth Look at the SumoSprings Solo Custom Helper Springs-SS84PV Video

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

I have included some pictures of Curt Front Mount Trailer Hitch Skid Shield #C31007 for you. The overall height of the skid plate is 4-1/4 inches, overall width is 4-7/8 inches. The overall length of the unit end to end is approximately 8-3/8 inches.…

The Redarc BCDC Charger part #RED36TR can work with your fridge but it wasn't designed to power accessories directly. You could use it to charge your 12 volt battery that is then powering your 3-way fridge on DC mode though.

Geoff, the wheel bearings for the Yakima Rack N Roll is not available for replacement, unfortunately. To replace the bearings you'd need to replace the entire wheel with the Replacement Wheels for Yakima Rack and Roll Trailer #8880157, which…

To charge your enclosed car trailer battery and power your accessories you're going to need the Redarc In-Vehicle BCDC Battery Charger - Single Input - DC to DC - 12V/24V - 12 Amp item #RED96FR. You are also going to want the 23-Amp MIDI Fuse Kit…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Thanks for the picture of your wheel and valve stem setup. I'd recommend 135 degree valve extenders like the part #WM8029135 as this will put the valve stem at a better angle than a 180 degree kit. These will work great with your current wheel…

Hey Ken, I recommend going with the Yakima EasyRider Double Decker Trailer #Y08129. This trailer will let you carry up to 4 kayaks up to 19' in length, can be used to carry your 12' John boat, has a 500 lb capacity, and has a top set of…

To trickle charge the battery on your trailer, you will need to convert your 4-Way on your 2013 Honda Odyssey to a 7-Way with something like the Hopkins Wiring Adapter, Item #37185. You will route the purple wire (Auxiliary) of this 7-Way to the…

Yes, you can attach a LockNLoad platform to the bottom of the Yakima EasyRider Double Decker Trailer item #Y08129 but not that one because it's too wide. Instead you'll need the 84" Long x 49" Wide Yakima LockNLoad Platform Rack for…

I reached out to my contact at Yakima and they confirmed that the Heavy Duty Shocks for Yakima Rack and Roll Trailer #Y08110 will fit on the Yakima Rack and Roll Trailer - 66 inch #Y08106. However the 66 inch trailer is not able to carry more than…

I checked with Yakima who confirmed the tires on the Easy Rider Trailer #Y08129 are tubeless and do not require inner tubes like the Rack and Roll #Y08107. Both the Rack and Roll and Easy Rider trailer axles should be greased before installation as…