Expert Review Video:
Tube Step Specs:
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
Grated steel running boards have an extra-wide stepping surface with raised treads to prevent slipping when entering your truck. Serrated treads provide a rugged look and help keep mud and snow from getting in your cab. Custom mounting kit included.
Installation Notes:
No drilling required for installation
Tech Tip:
Installation is made easier with a tool known as a knuckle extension, which can be purchased locally.
More Information >Tube Step Specs:
Features:
These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
No drilling required for installation
Requires running board to be shortened
A Gap Strip (# 27-9901) is recommended for this application
More Information >Tube Step Specs:
Features:
These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
No drilling required for installation
A Gap Strip (# 27-9901) is recommended for this application
Tech Tip:
Installation is made easier with a tool known as a knuckle extension, which can be purchased locally.
More Information >Tube Step Specs:
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
No drilling required for installation
A Gap Strip (# 27-9901) is recommended for this application
Tech Tip:
Installation is made easier with a tool known as a knuckle extension, which can be purchased locally.
More Information >Tube Step Specs:
Features:
Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of black powder coated steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
No drilling required for installation
A Gap Strip (# 27-9901) is recommended for this application
Tech Tip:
Installation is made easier with a tool known as a knuckle extension, which can be purchased locally.
More Information >Tube Step Specs:
Features:
Grated steel running boards have an extra-wide stepping surface with raised treads to prevent slipping when entering your truck. Serrated treads provide a rugged look and help keep mud and snow from getting in your cab. Custom mounting kit included.
Installation Notes:
No drilling required for installation
Requires running board to be shortened
More Information >Tube Step Specs:
Features:
These straight-style, extra-wide step bars give your vehicle a rugged look. The oval, black powder coated steel bars have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
These straight-style, extra-wide step bars give your vehicle a rugged look. The oval, polished stainless steel bars have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
No drilling required for installation
Requires running board to be shortened
A Gap Strip (# 27-9901) is recommended for this application
More Information >Tube Step Specs:
Features:
These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
No drilling required for installation
Requires running board to be shortened
A Gap Strip (# 27-9901) is recommended for this application
More Information >Tube Step Specs:
Features:
Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.
Installation Notes:
No drilling required for installation
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…
view full answer...For the Edge CS2 Evolution Diesel Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen.…
view full answer...Hello Brad, we have exactly what you are looking for! You can use the Curt Adapter Rails #C88KR. This will attach directly to the OEM puck system (the 5 pockets) in the bed of your 2024 Chevy, and it will give you the industry standard rails you…
view full answer...The RF controller of your Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR doesn't have an…
view full answer...It won't fit because the brackets are completely different. The 2008 GMC…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...With the ends of your Aries Oval Nerf Bars #AAS225041 being sealed and only having the one hole large enough to reach into I recommend using fly tape to insert into the opening you do have. You can then drive around with your 2016 Ram 1500 so the…
view full answer...You will be able to use the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness #41157 to install a 7-way connector in the bed of your 2024 Toyota Tundra. I can see it uses the 7-Way/4-Way Connector #HM40975 which is used on most trucks…
view full answer...The only replacement part we have available for the original Blue Ox Patriot (BRK2012) is the Replacement Brake Claw #BRK2512. Unfortunately, this system was discontinued in 2017 and there are no other replacement parts available any longer. You…
view full answer...Yes, the Aries AeroTread Running Boards #AA2051973 will fit your 2023 Dodge Durango GT Plus as long as it doesn't…
view full answer...The Dexter 2-Tang Clevis #T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for…
view full answer...Hey there Bonnie, thanks for the question and there is a great pair of running boards for your 2024 Dodge Durango GT, which are from Aries. I did verify this fit with the manufacturer, and they are the AeroTread boards, which come in a couple…
view full answer...Filter Products (34)