Tube Step Specs:
Features:
These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
Drilling required for installation
Tech Tip:
Running Boards will fit Laredo models only.
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
Depending on what cab style your 2006 Super Duty Cab and Chassis has will determine which DeeZee running boards you'd need. If you have a SuperCab…
view full answer...Hello Brad, we have exactly what you are looking for! You can use the Curt Adapter Rails #C88KR. This will attach directly to the OEM puck system (the 5 pockets) in the bed of your 2024 Chevy, and it will give you the industry standard rails you…
view full answer...The RF controller of your Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR doesn't have an internal battery and requires a 12v outlet for power. If…
view full answer...For the Edge CS2 Evolution Diesel Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen.…
view full answer...It won't fit because the brackets are completely different. The 2008 GMC Sierra's are a…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...When mounting the breakaway switch of the Invisibrake part #RM-8700 Roadmaster states to choose an area you can easily reach, near the center of the vehicle, with a surface of sufficient strength to hold the switch firmly in place, so that the…
view full answer...The vacuum line of the Roadmaster InvisiBrake Supplemental Braking System #RM-8700 will run to the brake master cylinder's vacuum line. I attached a picture that shows…
view full answer...When installing the Roadmaster InvisiBrake Supplemental Braking System, #RM-8700 it is advisable to go to the roadmaster web site (listed in your installation instructions and linked below) and select the…
view full answer...Yes, there is a 20 amp fuse installed on the breakaway system that comes with the Roadmaster InvisiBrake Supplemental Braking System part #RM-8700. If this fuse is removed then the breakaway system will no longer be active and the brakes would not…
view full answer...Your picture didn't make it through but if you had room for the Roadmaster InvisiBrake Supplemental Braking System #RM-8700 is really designed to mount on the interior of…
view full answer...With the ends of your Aries Oval Nerf Bars #AAS225041 being sealed and only having the one hole large enough to reach into I recommend using fly tape to insert into the opening you do have. You can then drive around with your 2016 Ram 1500 so the…
view full answer...Filter Products (2)