Select the correct transmission cooler by determining where there is enough space to mount it. The diagram on the left numbers the best three positions to mount the transmission cooler in order. Transmission coolers are more efficient when they receive maximum air flow. At Position 1, the transmission cooler is 100% efficient. Position 2, between the air conditioning condenser and radiator, is 75% efficient while Position 3, between the radiator and fan, is only 60% efficient. If positions 2 or 3 are used, a larger transmission cooler will be needed to compensate for the loss of cooling power. If this is the case, choose a transmission cooler that is one or two sizes larger.
Tech Tips: Transmission fluid cannot be over-cooled, but it is critical in extreme cold conditions to allow the vehicle to warm up before driving.
Transmission Coolers Specs:
Features:
...clamps Additional compression fittings 180-Degree, in-line thermostat for power-saving fan shut-off Insta-dapt radiator adapter All necessary mounting hardware Made in USA Specs: Inlets: -6 AN Adapters: -6...
Installation Notes:
Product is designed for vehicles which have a -6AN threaded fitting and braided steel hose
More Information >Videos
for Transmission Coolers
Help Articles
for Transmission Coolers
Expert Answers
for Transmission Coolers
You can install a stack cooler in your vehicle. The Class ratings are there as a reference point to a hitch Class. For example if someone has a Class III hitch they can look at coolers, see a Class III and say, hey, I have a Class III hitch so this…
view full answer...Hey Sam, I would recommend the Derale transmission cooler part #D13504 with the radiator adapter part #D13035 for your 2008 GMC Yukon XL with the 5.3 liter. This is a larger cooler that is the efficient plate fin design that we know works great on…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...In regards to your 2013 Chevrolet Silverado, if you will be removing the auxiliary transmission cooler then I recommend using the Derale Series 9000 Plate-Fin Transmission Cooler Kit part #D13614 to replace it. This cooler measures…
view full answer...The method we use to determine the correct line to install a transmission cooler on is pretty simple. You want to install the cooler on the return line. To determine which line is the return line you will want to start with your truck totally…
view full answer...I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...Hello Jim. For you I Recommend the SumoSprings Solo Custom Helper Springs #SS47PV. These are 1,800 lb capacity urethane jounce springs which will replace the factory bumpstops. I like these for a few reasons. The 1,800 lb capacity will be enough to…
view full answer...Functionally speaking, there…
view full answer...The good news is that 210 degrees…
view full answer...Given the weight of your trailer and the fact that you tow uphill I recommend going with the largest cooler or most efficient that will fit in the available space you have in the engine compartment of your 2004 Silverado. A stacked plate cooler is…
view full answer...The Flex-a-Lite FLX4126 will work for your 2012 GMC Yukon and comes with the necessary parts needed for installation, though there is a better option I recommend you. The Derale #D13504 is a plate-and-fin style cooler, which is a more efficient…
view full answer...