Expert Review Video:
Base Plates Specs:
Base Plate Features:
Tech Tip:
Product fits bumper mounts with a 7/8 inch pin diameter, and includes spacers to fit mounts from 5/8 inch to 7/8 inch thick.
More Information >Base Plates Specs:
Base Plate Features:
Base Plates Specs:
Base Plate Features:
Tech Tip:
Product fits bumper mounts with a 1 inch pin diameter, and includes spacers to fit mounts from 5/8 inch to 7/8 inch thick.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
No right hand drive/steering.
Product does not fit models with front leaf springs
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
No right hand drive/steering.
Product does not fit models with front leaf springs
More Information >Base Plates Specs:
Base Plate Features:
Base Plates Specs:
Base Plate Features:
Installation Notes:
No right hand drive/steering.
Product does not fit models with front leaf springs
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
No right hand drive/steering.
Product does not fit models with front leaf springs
More Information >Base Plates Specs:
Base Plate Features:
Fixed brackets provide a secure attachment point for your towbar.
Installation Notes:
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
Most vehicles have a steel bumper shaped like a U with a flat top and face, onto which the 1409-3 or 1409-1 brackets bolt. Some vehicles have bumpers without a flat face and top which prevent the use of these brackets. 1998 Jeep Wrangler uses 1417-1 if the front bumper has bumperettes.
More Information >Base Plates Specs:
Base Plate Features:
Fixed brackets provide a secure attachment point for your towbar.
Videos
for Base Plates
Help Articles
for Base Plates
Expert Answers
for Base Plates
I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand…
view full answer...When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
view full answer...The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some…
view full answer...I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...