Expert Review Video:
Towing Mirrors Specs:
Features:
Custom-fit towing mirrors securely snap over your vehicle's factory mirrors. They match the contours of your factory mirrors and retain use of factory turn signals, puddle lamps, BSDS camera, and LED spotlights. Simple, tool-free installation.
Installation Notes:
Mirror does not fit vehicles with extendable or telescoping mirrors
More Information >Towing Mirrors Specs:
Features:
Universal-fit mirrors clamp onto your factory side-view mirrors to extend your lines of sight while you're towing. The length of the bars can be adjusted to position each mirror closer to or farther from your vehicle. Sturdy steel construction.
More Information >Towing Mirrors Specs:
Features:
Universal-fit towing mirrors strap onto your factory mirrors to extend your lines of sight by 5". Durable ABS plastic mirrors have an aerodynamic shape and snug fit to reduce vibration and wind noise. Simple, tool-free installation and removal.
More Information >Towing Mirrors Specs:
Features:
Universal towing mirrors clip over your existing side-view mirrors to give you extended lines of sight. Dual strap system creates a snug fit. Works on driver's- and passenger's-side mirrors. Tool-free installation.
More Information >Towing Mirrors Specs:
Features:
These universal-fit mirrors clip onto your factory side-view mirrors to extend your lines of sight while you're towing. The 2 fully adjustable faces of each mirror let you customize your view. 2 Straps hold each mirror in place.
More Information >Towing Mirrors Specs:
Features:
Extra-large, universal towing mirrors clip over your existing side mirrors to give you an extended rear view. A strap system creates a snug fit to reduce vibration. Tool-free installation. Includes 2 mirrors.
More Information >Towing Mirrors Specs:
Features:
Universal dual lens towing mirror clips over one of your existing side mirrors to give you an extended rear view. A ratcheting strap system creates a snug fit to reduce vibration. Driver's and passenger's side. Tool-free installation.
More Information >Towing Mirrors Specs:
Features:
Extra-large, universal towing mirrors clip over your existing side mirrors to give you an extended rear view. A ratcheting strap system creates a snug fit to reduce vibration. Easy, tool-free installation. Includes 2 mirrors.
More Information >Towing Mirrors Specs:
Features:
These universal-fit mirrors clip onto your factory side-view mirrors to extend your line of sight while you're towing. The fully adjustable mirror face lets you customize your view. Two straps hold each mirror in place.
More Information >Videos
for Towing Mirrors
Help Articles
for Towing Mirrors
Expert Answers
for Towing Mirrors
The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...You will need the Ceiling Garnish for Fan-Tastic Vents Roof Vent #FVK1060-81 as it is specific to your Dometic Fantastic Fan 1450. The Ceiling Garnish for Ventline Roof Vent #VA0445-37 is going to have rounded corners as opposed to the square on…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured…
view full answer...On single axle trailers typically you put the hanger spacing right at 1/4 of an inch shorter than the leaf spring length from eye to eye center. So if you were using the leaf spring part #e54SR that you referenced which measures 25-1/8 inches long…
view full answer...On a single axle trailer you will want to have a hanger spacing of around 22-3/4 inches when using the 23-1/8 inch long Double-Eye Spring #e59SR. This will allow that rear shackle to correctly lean away from the axle for proper suspension travel.
view full answer...Hi Bruce, To lift your trailer…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...Filter Products (18)
Contact and Help
What our customers are saying:
Quick processing, and delivery. reasonably priced very satisfied
Bernie
Krakow, WI