Tow Bar Wiring Specs:
Accessory Parts:
Features:
This kit provides your trailer or towed vehicle with the required lighting for towing. Durable rubber-coated housing and polycarbonate lens. Magnetic bases won't scratch your vehicle. Includes wiring harness, hardware, and carrying case.
Installation Notes:
Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.
Automatic Battery Disconnect RM-765 cannot be used on this vehicle
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
This kit provides your trailer or towed vehicle with the required lighting for towing. Durable rubber-coated housing and polycarbonate lens. Magnetic bases won't scratch your vehicle. Includes wiring harness, hardware, and carrying case.
Installation Notes:
Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.
Automatic Battery Disconnect RM-765 cannot be used on this vehicle
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
This kit provides your trailer or towed vehicle with the required lighting for towing. Durable rubber-coated housing and polycarbonate lens. Magnetic bases won't scratch your vehicle. Includes wiring harness, hardware, and carrying case.
Installation Notes:
Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.
Automatic Battery Disconnect RM-765 cannot be used on this vehicle
More Information >Videos
for Tow Bar Wiring
Help Articles
for Tow Bar Wiring
Expert Answers
for Tow Bar Wiring
I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that.…
view full answer...When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
view full answer...The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…
view full answer...Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long.…
view full answer...For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part…
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…
view full answer...I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand…
view full answer...The brake assemblies you have are 7k Dexter assemblies that are 12 inch by 2 inch in size. The part number #AKEBRK-7-SA will work as a great replacement set. This includes assemblies for both sides of your trailer that are self adjusting.
view full answer...