Truck Bed Slide Specs:
Features:
...sliding off the tray T-tracks in guard rails and deck rails provide attachment points for D-rings and accessories 4 D-rings can slide anywhere on T-tracks to provide anchor points for tie-down straps Deck...
More Information >Truck Bed Slide Specs:
Features:
...length) Guard rail height: 5" Grab handle length: 30" Number of bearings: 4 2 Load bearings: 3,282-lb rating each 2 Ball-sealed roller bearings 5-Year limited warranty Limited lifetime...
More Information >Truck Bed Slide Specs:
Features:
...length) Guard rail height: 5" Grab handle length: 30" Number of bearings: 4 2 Load bearings: 3,282-lb rating each 2 Ball-sealed roller bearings 5-Year limited warranty Limited lifetime...
More Information >Truck Bed Slide Specs:
Features:
...on uneven surfaces Laminated, 3/4", marine-grade plywood deck supports cargo and prevents skid Textured polypropylene surface resists tears, chemicals, moisture, and flame spread Adjustable feet let...
More Information >Truck Bed Slide Specs:
Features:
...sliding off the tray T-tracks in guard rails and deck rails provide attachment points for D-rings and accessories 4 D-rings can slide anywhere on T-tracks to provide anchor points for tie-down straps Deck...
More Information >Truck Bed Slide Specs:
Features:
...tailgate (75% of tray length) Guard rail height: 5" Grab handle length: 30" Number of bearings: 4 2 Load bearings: 3,282-lb rating each 2 Ball-sealed roller bearings 5-Year limited warrant...
More Information >Truck Bed Slide Specs:
Features:
...tailgate (75% of tray length) Guard rail height: 5" Grab handle length: 30" Number of bearings: 4 2 Load bearings: 3,282-lb rating each 2 Ball-sealed roller bearings 5-Year limited warrant...
More Information >Truck Bed Slide Specs:
Features:
...sliding off the tray T-tracks in guard rails and deck rails provide attachment points for D-rings and accessories 4 D-rings can slide anywhere on T-tracks to provide anchor points for tie-down straps Deck...
More Information >Truck Bed Slide Specs:
Features:
...sliding off the tray T-tracks in guard rails and deck rails provide attachment points for D-rings and accessories 4 D-rings can slide anywhere on T-tracks to provide anchor points for tie-down straps Deck...
More Information >Truck Bed Slide Specs:
Features:
...and BedBins (sold separately) keep hand tools and other items organized Large grab handle lets you safely slide tray with one hand Release lever secures tray in 4 positions - fully closed, fully extended, and 2...
More Information >Videos
for Truck Bed Slide
Help Articles
for Truck Bed Slide
Expert Answers
for Truck Bed Slide
I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is…
view full answer...On single axle trailers typically you put the hanger spacing right at 1/4 of an inch shorter than the leaf spring length from eye to eye center. So if you were using the leaf spring part #e54SR that you referenced which measures 25-1/8 inches long…
view full answer...For your AL-KO 7210 braking assembly, you can use the Hydraulic Brake Kit #AKFBBRK-7 as a replacement. These braking assemblies measure 12" x 2", bolts onto a 5 bolt mounting flange, will work with wheel sizes from 14-1/2"…
view full answer...I have spoken with Lippert about the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part #LC675817 in they past and they informed me that the most important aspect is that the battery/batteries are sufficiently charged, between…
view full answer...The caliper bracket you are looking for is the Replacement Mounting Bracket #KCMB12D which is compatible with the 5 bolt mounting flange you have as well as the 225 Kodiak Dacromet calipers you have as well. Then for a bolt kit you'd want…
view full answer...The typical tire should run about 158 degrees (Farenheidt) once you get going down the road, but this can vary greatly depending on the weight of the trailer, how fast you're traveling, and also driving habits. So while 158 is probably…
view full answer...What you are wanting to do is very possible with the GO Power Solar Panel kit part #34273836. You could mount it on your pin box and then run the wiring to your batteries via an SAE connector. We don't have an SAE connector adapter but they…
view full answer...We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based…
view full answer...Thanks for the picture of what you have and the info you listed. The correct wheel you need is the part #AM20794 that you referenced.
view full answer...We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…
view full answer...You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…
view full answer...