2018 Jayco Vehicle Seat Covers

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hello Chris, Both are great options, and for me, the decision would really come down to the installation process. The Draw-Tite #DT53GR is much easier to install, though it does require trimming the fascia. I’ve attached a picture for reference—the…

Hey Tim, I recommend using the Black Armour Heavy-Duty Custom Truck Bed Mat #BA62KR for your 2025 Toyota Tundra. I really like this mat because it is 1/2" thick and is made of a rubber that's hardened by a vulcanization process that even…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Chevy stopped using a port to plug in a brake controller after the 2006 model year. The tow package wires to install a brake controller are still present up under the dash, to the left of the steering column, held together with a white tag. The wires…

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

Hey Terry, so the O-rings of the Lippert Replacement Foot part #LC324269 basically go on either side of the foot pad to allow it to pivot a little bit. It goes bolt, metal washer, o-ring, foot pad, and then o-ring.

Hi Pierre; there are no custom wiring harnesses with a T-connector for your 2021 Chevy Bolt EV but you can use the #119147KIT. This will still give you a 4-way connector at the rear to power your trailer's signal lights. If you're worried…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Hey Ken, Rhino Rack does have a Pioneer Platform that fits your 2021 Toyota Highlander with the part #RR22AP which comes with all of the needed mounts and brackets. The dynamic weight capacity is 175 lb but we do not have a static capacity at this…

Hey Daniel! You won't have to remove the front bumper but you'll need to take that plastic piece off in the front to cut a hole for the receiver to protrude through. The EcoHitch Hidden Front Mount Trailer Hitch item #EH89CR has been…

We do have what you need to add a 7-way trailer connector to your 2018 Subaru Outback Wagon but there isn't a specific custom harness that fits. If right now the Outback has no trailer wiring at all the easiest way to add a 7-way is to start with…