Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
To provide a 2 inch hitch ball for your Trailer Valet XL #TVXL25 that came with a 2-5/16 inch ball, you can use the 2 Inch Hitch Ball for Trailer Valet XL Trailer Dolly #TVHB2. This part number will provide you with a new 2 inch diameter ball for…
view full answer...If the front part of your square-bodied coupler is approximately 3 inches tall, based on the inner dimensions of the lock the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33 will work well for you. The #BLTL-33 has inner dimensions of 3-1/8 inches x…
view full answer...Yes, the 5 on 4-1/2" bolt pattern in regards to trailer wheels is much more common therefore the selection of wheels will be much greater. The 5 on 5" bolt pattern has a slightly higher capacity but only marginally. I recommend the Dexstar…
view full answer...The etrailer hitch part #e98857 that you referenced comes with bolts that are sized M10-1.25.
view full answer...Because your 2007 Ford F-150 has an extra wire, you will need to determine their function and match that with the 4 brake controller wires. You will need a circuit tester like #PTW2993 to probe the wires for function. The four wires from your brake…
view full answer...You can certainly install a trailer brake controller, such as the excellent Tekonsha Prodigy P2 #90885, to your 2014 Chevy Silverado using the factory pigtail harness that came with the truck. The brake controller will include a pigtail harness that…
view full answer...We will need some more information in order to track down a new hub to fit your assembly K-H 71744. Pull off your old hub and look for numbers stamped into the bearings. If you do not see the numbers then you will need to use 4" Carbon Fiber…
view full answer...The 10 to 18 inch measurement is referring to the wheel/rim only - not the whole tire - for the Trimax wheel lock, which is the following part number: - Trimax Heavy Duty Adjustable Wheel Lock with Padlock - 10" to 18" Wheels #TMX42ZR
view full answer...I went out to the warehouse and found that the thread of the bolts in the Hardware Kit #DM6166 you referenced is about 1-3/4" long while the overall length of the bolts is 2-1/8" which you can see in the attached photo.
view full answer...While the Trimax Heavy Duty Adjustable Wheel Lock with Padlock #TMX42ZR will help prevent theft and likely keep your trailer from moving too much, this shouldn't be relied upon as a chock - for that you'd want something like the Trimax Wheel…
view full answer...The InfiniteRule Lock for Demco eZ-Latch #IR66FR will fit 2" and 2-5/16" couplers. This lock has an internal length of 2-15/16" to fit the pin hole on your coupler. I have linked an image below showing it on a 2-5/16" coupler in…
view full answer...In order to keep a trailer from rolling on a slight incline, what you will need are wheel chocks. You will simply put them behind your trailer tires and that will prevent the trailer from rolling away from you. You'll want to get wheel chocks…
view full answer...Filters
3441 results
Vehicle Fit
Fit 2012 Jayco Eagle Super Lite Travel Trailer