5-1/4" x 4-3/4" Square. Waterproof trailerlight serves 7 functions: stop, turn, tail, rear reflex, side marker, side reflex, and license plate light. Stud mount on 2" centers. 2-Wire self-grounding design with 15" leads.Features: Square combination trailer tail light serves 7 functions Stop light, turn signal light, tail light, rear reflex marker, side marker light, side reflex reflector, and license plate illuminator Built-in reflex reflector removes the need for a separate reflector Sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing and durable acrylic lens Red lens over white LEDs Stud mount with included hardware 2-Wire pigtail hardwires with 15" leads Self-grounding design grounds through hardware Specs: Configuration: driver's side Passenger's side: STL8RGB (sold separately) Dimensions: 5-1/4" wide x 4-3/4quot; tall x 2-11/16" deep Light face: 4-3/4" wide x 4-3/4" tall Distance between mounting studs (center on center): 2" Diodes: 14 Power draw at 12.8V: Stop light: 0.259 amps Side marker light: 0.062 amps Wire length: 15" Lifetime warranty on LEDs
You're loaded up after dark and rolling out. This light handles the signaling and keeps your plate visible. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.Highlights Eight Functions in One: Covers everything you expect from a full rear trailerlight, plus a few extras. Plated and Legal: Built-in license light on the driver side keeps your plate visible and compliant. Sealed for Marine Use: Waterproof, dustproof housing is fully submersible and IP68 rated.
You're loaded up after dark and rolling out. This light handles the signaling when and where it matters. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.Highlights Seven Functions in One: Covers everything you expect from a full rear trailerlight, plus a few extras. Clean Passenger-Side Fit: Matches the driver-side light without the license plate window. Sealed for Marine Use: Waterproof, dustproof housing is fully submersible and IP68 rated.
18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Motion sensor activates light when motion detected. Durable polycarbonate housing. ... Features: Low-profile dome light provides bright white light for refrigerated trucks and trailers Designed for use in applications that face extreme temperatures Safely operates in -40 F to 140 F temperatures Built-in motion sensor activates light when movement is detected LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brigther light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC and 24V DC systems Light output stays consistent at all operating voltages Surface mount - hardware not included 2-Wire design includes power lead and ground wire Specs: Dimensions: 18-1/4" long x 5-3/4" tall x 1-5/64" deep Light output: Effective lumen output: 990 lumens Raw lumen output: 1,400 lumens 8 Diodes Power draw: At 12.8V: 1.61 amps At 24V: 0.80 amps Wire length: 16" Wire gauge: 16 Input voltage: 7V-30V DC Lifetime warranty on LEDs Raw Lumens vs.
Haul your large boat trailer safely, with this 12-15/16" x 2", submersible, V-shaped identification light. When attached to the back of your trailer, this red light indicates to other drivers that your trailer is 80" or wider.Features: LED identification light improves road safety by alerting other drivers that your trailer is over 80" wide V-shaped light is designed to fit your boat trailer's rear, V-bend cross member Sealed, waterproof unit includes UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Red lens over red LEDs Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation 12V DC compatible Surface-mount installation - hardware not included Hardwires to trailer Meets or exceeds FMVSS 108 standards Assembled in the USA Specs: Dimensions: 12-15/16" long x 2" wide x 1/2" thick Distance between mounting holes: 9" Diodes: 3 Input voltage: 9V - 14V Power draw: 0.07 - 0.09 amps Wire length: 58" IP rating: 68 Limited lifetime warranty
18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Motion sensor activates light when motion detected. Durable polycarbonate housing. ... Features: Low-profile dome light provides bright white light for refrigerated trucks and trailers Designed for use in applications that face extreme temperatures Safely operates in -40 F to 140 F temperatures Built-in motion sensor activates light when movement is detected LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brigther light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC and 24V DC systems Light output stays consistent at all operating voltages Surface mount - hardware not included 2-Wire design with 0.180 male bullets Specs: Dimensions: 18-1/4" long x 5-3/4" tall x 1-5/64" deep Light output: Effective lumen output: 990 lumens Raw lumen output: 1,400 lumens 8 Diodes Power draw: At 12.8V: 1.61 amps At 24V: 0.80 amps Wire length: 16" Wire gauge: 16 Input voltage: 7V-30V DC Lifetime warranty on LEDs Raw Lumens vs.
We think the waterproof seal and potting on this tail light makes it perfect for boat trailers or any light-duty trailer that may be exposed to water - which is all of them. It displays every signal you need: stop, tail, turn, brake, and more.Features: LED tail light provides 8 functions Stop, tail, turn, clearance, side marker, side reflector, rear reflector, and license plate Truly submersible TecSeal urethane potting protects circuit board from vibration and moisture Sonic-welded case IP68 Rating Red impact-resistant lens over red LEDs 1 White LED for license plate More efficient and durable than incandescent bulbs Direct replacement for standard trailerlight Requires (2) 1/4-20 carriage bolts (sold separately) 9" pigtail wires directly into your trailer's wiring DOT compliant Meets FMVSS 108 requirements for narrow and wide vehicles Specs: Configuration: driver's side Passenger side: TN92XR (sold separately) Dimensions: 8" long x 2-7/8" tall x 2-7/8" deep Total diodes: 8 Power draw between 9-14V: Stop: +0.11- 0.15 amps Tail/turn: 0.14- 0.20 amps
We think the waterproof seal and potting on this tail light makes it perfect for boat trailers or any light-duty trailer that may be exposed to water - which is all of them. It displays every signal you need: stop, tail, turn, brake, and more.Features: LED tail light provides 7 functions Stop, tail, turn, clearance, side marker, side reflector, and rear reflector Truly submersible TecSeal urethane potting protects circuit board from vibration and moisture Sonic-welded case IP68 Rating Red impact-resistant lens over red LEDs More efficient and durable than incandescent bulbs Direct replacement for standard trailerlight Requires (2) 1/4-20 carriage bolts (sold separately) 9" pigtail wires directly into your trailer's wiring DOT compliant Meets FMVSS 108 requirements for narrow and wide vehicles Specs: Configuration: passenger side Driver side: TN32XR (sold separately) Dimensions: 8" long x 2-7/8" tall x 2-7/8" deep IP Rating: 68 Total diodes: 7 Power draw between 9-14V: Stop: +0.11- 0.15 amps Tail/turn: 0.06- 0.09 amps
3/4" Round. Waterproof mini trailerlight with 2 red LEDs functions as both a clearance light and a side marker light when properly mounted. Clear polycarbonate lens. ... Features: Small, round trailerlight functions as both a clearance light and a side marker light when properly mounted Sealed, waterproof construction is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Clear lens with red LEDs Recessed mount with included black PVC grommet Installation requires an 11/16" hole at desired location 2-Wire pigtail - includes power lead and ground wire DOT compliant PC rated Specs: Light dimensions: 3/4" diameter x 7/8" deep Grommet diameter: 11/16" Diodes: 2 Power draw at 12.8 volts: 0.03 amps Lifetime warranty on LEDs Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4-1/2" x 2-7/8" x 1". Low-profile dome light illuminates an RV's interior with bright white light. Toggle switch controls power. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire design.Features: Low-profile, rectangular dome light provides bright white light for your trailer's interior Built-in toggle switch controls on/off function Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution Cool white LEDs make great replacements for incandescent lights Lasts 50 times longer More efficient - provides brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lens with white LEDS Sonically sealed, waterproof housing and lens Compatible with 12V DC systems Surface mount - hardware not included 2-Wire pigtail - includes power lead and ground wire Specs: Light output: Effective lumen output: 810 lumens Raw lumen output: 1,044 lumens Diodes: 18 Dimensions: 4-1/2" long x 2-7/8" tall x 1" thick Wiring length: 6" Power draw at 12.8V: 0.7 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Water-resistant utility light brightens up your enclosed trailer for unloading gear after dark or the outside of your RV for those warm summer barbecue nights with the family. ... Features: Utility light is perfect for an exterior RV awning setup or inside an enclosed trailer Included energy-efficient, cool white LEDs last longer and burn brighter than incandescent bulbs Clear plastic lenses is less likely to shatter than a glass lens Textured pattern helps disperse bright light throughout your trailer Durable, black plastic construction is water resistant Bolt-on installation onto the an interior or exterior surface - hardware not included Wires to a light switch inside your RV or trailer - white for ground and black for power Specs: Overall dimensions: 8" long x 1-1/4" tall x 1" deep Mounting hole spacing (center to center): 6-11/16" Voltage: 12V DC Wattage: 6 watts Number of LEDs: 30 1-Year warranty Need extra light to load and unload gear from a box truck or enclosed trailer after dark?
Utility light brightens up your enclosed trailer for unloading gear after dark or the outside of your RV for those warm summer barbecue nights with the family. ... Features: Utility light is perfect for an exterior RV awning setup or inside an enclosed trailer Included energy-efficient, cool white LEDs last longer and burn brighter than incandescent bulbs Integrated toggle switch lets you turn the light on and off Can also be wired to an interior light switch Clear polycarbonate plastic lens is less likely to shatter than a glass lens Durable, black plastic construction Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included 2-Wire design hooks up to a 9-volt battery (not included) Specs: Overall dimensions: 5-1/4" long x 2-7/8" wide x 1-7/8" deep Operating voltage: 9V DC Light output: 51 lumens Number of LEDs: 3 1-Year limited warranty Need extra light to load and unload gear from a box truck or enclosed trailer after dark?
Slim left-side 8-function tail light with built-in license plate light. IP68 sealed and truly submersible, it installs with standard bolts and a 12" pigtail to keep your trailer bright and legal mile after mile.Features: Left-side boxlight with 8 functions: stop, turn, tail, side marker, clearance marker, rear reflector, side reflector, license plate light IP68 dust- and waterproof with hermetic seal - sonic-welded, potted electronics are submersible Surface mount installation - hardware not included Impact-resistant lens; meets FMVSS 108 requirements Specs: Measurements: 6" x 3-9/16" x 2-1/4" LEDs: 7 6 Red 1 White for license plate light Color: Red Voltage: 9 to 14 volts Mounting: Uses (2) 1/4-20 carriage bolts (not included) Connector: 12" Pigtail Wire colors: White: ground Brown: brake lights and license plate Green: right turn Yellow: left turn Lifetime warranty TecNiq's 8 Function Slim Line taillight is able to meet all requirements for stop, turn, tail, side marker, clearance marker, rear reflector, side reflector and license plate light in a revolutionary, cost-effective design.
Change this light strip's color patterns or play your favorite songs wirelessly using a free smartphone app. You can shorten the weatherproof light strip for a custom fit underneath a smaller RV awning, in a bedroom closet, or on a boat.Or perhaps you need extra light to load and unload gear from a box truck or enclosed trailer after dark? This LED light gives you bright light inside or outside your RV, utility trailer, pontoon boat, service truck, or garage.
Change this light strip's color patterns or play your favorite songs wirelessly using a free smartphone app. You can shorten the weatherproof light strip for a custom fit underneath a smaller RV awning, in a bedroom closet, or on a boat.Or perhaps you need extra light to load and unload gear from a box truck or enclosed trailer after dark? This LED light gives you bright light inside or outside your RV, utility trailer, pontoon boat, service truck, or garage.
Change this light strip's pattern and brightness depending on your needs with the included wireless RF remote control. Weatherproof light strip can be cut to fit anywhere you need it - your RV cargo compartment, bedroom closet, or boat.Features: Strip light is perfect for inside an RV cargo compartment or an enclosed trailer Wireless RF remote control allows you to operate the light patterns, brightness, and speed options Cut-to-fit points every 2" lets you shorten the light strip for a perfect fit in a smaller space Energy-efficient LEDs emit a bright white light that last longer and burn brighter than incandescent bulbs Weatherproof, flexible silicone construction protects the LEDs against water, dirt, and dust Easy, peel-and-stick installation with 3M adhesive backing - no drilling required Multiple options hook the light strip up to power Includes 110V AC power adapter for direct connection to a wall outlet Wires to a 12V DC power source Specs: Light strip dimensions: 16' long x 3/8" wide Voltage: 12V DC or 110V AC Number of LEDs: 300 2-Year limited warranty Need extra light to load and unload gear from a box truck or enclosed trailer after dark?
Slim, right-side 7-function tail light that installs with standard bolts and a 12" pigtail. Sealed and submersible for ramps and storms, with bright LEDs and a tough lens to keep you seen mile after mile.Features: Right-side boxlight with 7 functions: stop, turn, tail, side marker, clearance marker, rear reflector, side reflector IP68 dust- and waterproof with hermetic seal; submersible - potted electronics for durability Surface mount installation Impact-resistant lens - meets FMVSS 108 requirements Specs: Dimensions: 6" x 3-9/16" x 2-1/4" LEDs: 6 Color: Red Voltage: 9 to 14 volts Mounting: Uses (2) 1/4"-20 carriage bolts (not included) Connector: 12" pigtail Wire colors: White: ground Brown: brake lights Green: right turn Yellow: left turn Lifetime warranty TecNiq's 7 Function tail light is able to meet all requirements for stop, turn, tail, side marker, clearance marker, rear reflector, and side reflector light in a revolutionary, cost-effective design.
Need a complete lighting setup for your trailer? This kit includes everything required for trailers under 80" wide, making it easy to get fully equipped and compliant. ... Features: Trailerlight kit designed to provide complete lighting for trailers under 80" wide Includes tail lights, side marker lights, wiring harness, and license bracket Provides all required lighting and reflectors for DOT compliance 20&' Trailer harness allows full trailer connection License bracket made of corrosion-free black plastic that flexes on impact Mounting hardware and installation instructions included Easy installation for complete setup Includes 1 complete trailerlight kit Specs: Application: Trailers under 80" wide Tail light dimensions: 4-3/4" x 4-1/2" Harness length: 20' Light colors: Red, white, amber
4-3/4" x 4-3/4". Rugged LED utility light provides bright light for maximum forward visibility. Premium LEDs for superior light output. Prime drive regulates LED temperature and maximizes lifespan. ... This commitment to providing the best lighting solutions possible is one of the reasons why Vision X products are used by NASA. Check the diagram below for a better understanding of what goes into testing a Vision X light: Raw Lumens vs.
4-1/2" Diameter. Rugged LED utility light provides bright light for maximum forward visibility. Premium LEDs for superior light output. Prime drive regulates LED temperature and maximizes lifespan. ... This commitment to providing the best lighting solutions possible is one of the reasons why Vision X products are used by NASA. Check the diagram below for a better understanding of what goes into testing a Vision X light: Raw Lumens vs.
12-5/8" Long x 1" tall. Waterproof trailerlight serves 3 functions: brake, tail, turn. Low-profile light fits in tight spaces. Smoked lens works great with black-out style on vehicles or trailers. 3-Wire pigtail. 9 LEDs. ... Features: Oblong trailer tail light serves 3 functions Stop light Tail light Turn signal light Smoked lens works great with blacked-out style on vehicles or trailers Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Mounts on surface with built-in black flange - hardware not included 3-Wire pigtail DOT compliant Specs: Overall dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Weight:.44 lbs Diodes: 9 Voltage: 12V Amp draw: Tail: 0.01A Stop: 0.2A Lifetime LED warranty
6-1/2" x 2-3/8" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. ... Mounting hardware is used to secure the light to the trailer.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailerlight serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailerlight serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
Filters
