16" x 1-5/16" x 11/16". Low-profile LED trailer tail light serves as a stop, turn, and tail light for trailers over 80" wide. Surface mount - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
15" Long x 1-1/2" tall. Waterproof trailer light serves 3 functions: brake, tail, turn. Low-profile Thinline light fits in tight spaces. Surface mount on 14-1/8" centers - hardware not included. 3-Wire pigtail.Features: Low-profile trailer tail light serves 3 functions Stop light Tail light Turn signal light Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens with white LEDs Mounts on surface of trailer - hardware not included 3-Wire pigtail DOT compliant Specs: Dimensions: 15" long x 1-1/2" tall x 5/8" deep Distance between mounting holes (center on center): 14-1/8" Diodes: 9 Power draw at 12.8V: Stop light: 0.35 amps Tail light: 0.22 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
3-15/16" x 1-1/4" Rectangle. Waterproof LED trailer light functions as a clearance light or side marker light when properly mounted. Surface mount - hardware not included. Accepts standard 1-prong or 2-prong plugs. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
13-1/4" x 2-1/8" x 1-7/16". Waterproof LED tail light functions as a stop, turn, and tail signal on trailers over 80" wide. Durable polycarbonate lens and housing. Surface mount - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
4-1/8" x 1-1/4". Waterproof, LED trailer light serves as either a clearance or side marker light. Durable polycarbonate housing and lens. Surface mount with chrome bracket. Single wire grounds through mounting hardware. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
20-1/2" x 1-1/16" x 3/4". Waterproof trailer light serves 3 functions on trailers over 80" wide: brake, tail, and turn. Low-profile ThinLine light fits in tight spaces. Surface mount - hardware not included. 3-Wire design.Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
2-1/2" x 1-3/16". Waterproof mini trailer light functions as a clearance light or side marker light when properly mounted. Durable polycarbonate lens. Surface mount with self-grounding bracket and hardware. 1-Wire design. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
4-1/8" x 1-1/4". Waterproof, LED trailer light serves as either a clearance or side marker light. Durable polycarbonate housing and lens. Surface mount with chrome bracket. Single wire grounds through mounting hardware. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
4" x 1-1/4" Rectangle. Waterproof, LED trailer light acts as a clearance or side marker when properly mounted. Durable polycarbonate housing and lens. Snap-in mounting. Accepts standard 1-wire or 2-wire plugs. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
15-1/2" x 1-3/16" x 1-3/8". Low-profile identification light bar is designed for trailers wider than 80". Durable steel base with black enamel finish. Surface mount to trailer - hardware not included. 1-Wire design. ... Features: Incandescent trailer light functions as an identification light bar for trailers over 80" wide 3 Peterson 136R lights are replaceable (M136R - sold separately) Thin-line series has a low-profile for installation into tight spaces Durable steel base with black enamel finish is corrosion resistant Red lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 15-1/2" long x 1-3/16" tall x 1-3/8" thick Distance between mounting holes (center on center): 6-15/16" Bulb type: 194/193 Number of bulbs: 3 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 49062 Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
3-1/2" x 1-1/8" Oval. Low-profile incandescent trailer light serves as a clearance or side marker light. Durable base with scratch-resistant acrylic lens. Surface mount - horizontal or vertical. 1-Wire design. ... Features: Incandescent trailer light functions as a clearance or side marker light when properly mounted ThinLine series has a low-profile for installation in tight spaces Premium bulb provides up to 15,000 hours of light Snap-on acrylic lens Durable high-impact base with scratch-resistant acrylic lens Red lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Can be mounted vertically or horizontally Single wire design grounds through mounting hardware DOT compliant P2 rated Specs: Dimensions: 3-1/2" long x 1-1/8" tall x 1-1/16" deep Distance between mounting holes (center on center): 2-3/4" Bulb type: 194/193 Power draw at 12V: 0.25 amps 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 45252-3 Truck Lite # 1555 Optronics # MC68RB P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
3-1/2" x 1-1/8" Oval. Low-profile incandescent trailer light serves as a clearance or side marker light. Durable base with scratch-resistant acrylic lens. Surface mount - horizontal or vertical. 1-Wire design. ... Features: Incandescent trailer light functions as a clearance or side marker light when properly mounted ThinLine series has a low-profile for installation in tight spaces Premium bulb provides up to 15,000 hours of light Snap-on acrylic lens Durable high-impact base with scratch-resistant acrylic lens Amber lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Can be mounted vertically or horizontally Single wire design grounds through mounting hardware DOT compliant P2 rated Specs: Dimensions: 3-1/2" long x 1-1/8" tall x 1-1/16" deep Distance between mounting holes (center on center): 2-3/4" Bulb type: 194/193 Power draw at 12V: 0.25 amps 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 45253 Truck Lite # 1555A Optronics # MC68AB Primatronics # PT2630A P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Black Bracket and Single Wire Plug for Thin-Line Series Trailer Clearance and Side Marker Lights This kit combines a black molded ABS, surface mount bracket and a molded plastic, single-wire plug for use with the MC65 Series lights.
Chrome Bracket and Single Wire Plug for Thin-Line Trailer Clearance and Side Marker Lights This kit combines a chrome, surface mount bracket and a molded plastic, single-wire plug for use with the MC65 Series lights.
... Chrome bezel provides a finished look for your 20-1/2" long Optronics ThinLine tail light. Durable ABS plastic construction. Fits STL64 and STL264 series lights.Features: Chrome bezel provides a finished look for your 20-1/2" long Optronics ThinLine tail light when installed Fits STL64RB, STL64RCB, STL264RB, and STL264RCB Durable ABS plastic construction Surface mount to trailer - hardware not included Specs: Quantity: 1 Dimensions: 21-1/2" long x 1-1/2" tall x 1/2" thick Distance between mounting holes (center on center): 19-5/8" 3-Year limited warranty
Includes bracket, plug and molded lead wire. Black Bracket and Single Plug-N-Go Plug for Thin-Line Trailer Clearance and Side Marker Lights This kit combines a black molded ABS, surface mount bracket and "plug-n-go" male connector for use with the MC65 Series lights.
4-1/16" L x 1-1/16" W x 5/8" D; Molded plastic ABS; weather resistant; surface mount on 3" centers; use with MC65 series lightsBlack Molded ABS Mounting Bracket for Thin-Line Series Clearance and Side Marker Lights A black molded ABS, surface mount bracket for use with MC65 Series lights. This all-weather, molded plastic bracket measures 4-1/16" long x 1-1/16" wide x 5/8" deep.
Chrome mounting bracket with plug connector for installing MC65 Series clearance and side marker trailer lights. Molded plugs for watertight connection. Surface mount - hardware not included. Single wire design.Features: Kit combines a chrome bracket and "plug-n-go" male connector for mounting MC65 Series trailer clearance and side marker lights Durable chrome all-weather bracket resists corrosion "Plug-N-Go" molded male plug ensures watertight connection to electrical harness Surface mount - hardware not included Single wire design grounds through mounting hardware Specs: Overall dimensions: 4-1/16" long x 1-1/16" wide x 1/2" tall Distance between mounting holes (center on center): 3"
... Black bezel provides a finished look for your 20-1/2" long Optronics ThinLine tail light. Durable ABS plastic construction. Fits STL64 and STL264 series lights.Features: Black bezel provides a finished look for your 20-1/2" long Optronics ThinLine tail light when installed Fits STL64RB, STL64RCB, STL264RB, and STL264RCB Durable ABS plastic construction Surface mount to trailer - hardware not included Specs: Quantity: 1 Dimensions: 21-1/2" long x 1-1/2" tall x 1/2" thick Distance between mounting holes (center on center): 19-5/8" 3-Year limited warranty
Features: Provides chrome base for STL69RRXB Series lights Enhances appearance of ultra ThinLine LED lights Use with STL69RRXB Mounts on the surface Measures 16-1/8" long x 1-7/8" wide Mounting holes measure 14-1/8" apart
18-7/8" L x 2" W x 13/16" D; chrome base; enhances appearance of ThinLine series LED lights; surface mountFeatures: Chrome base enhances appearance of ThinLine series LED lights MCL78RB/RBF/REZB or MCL88RCB, STL79RB, STL80RB, STL89RCB/RCPG or STL90RCB Surface mount 18-7/8" Long x 2" wide x 13/16" deep Surface-mount chrome base enhances appearance of ThinLine series LED lights.
Single Wire Plug for Thin-Line Series Trailer Clearance and Side Marker Lights A molded plastic, single-wire plug used with MC65 Series lights in applications where grounding is done through the mounting hardware.
16-5/16" L x 1-5/8" W; chrome base for MCL70 and STL69 Series lights; surface mount; enhances appearance of ultra ThinLine LED lightsFeatures: Provides chrome base for MCL70 and STL69 Series lights Enhances appearance of ultra ThinLine LED lights Use with MCL70RB/70RCB or STL69RB/RCB Mounts on the surface Measures 16-5/16" long x 1-5/8" wide Surface mount chrome base enhances appearance of ultra ThinLine LED lights.
Gray Bracket and Single Wire Plug for Thin-Line Series Trailer Clearance and Side Marker Lights This kit combines a gray molded ABS, surface mount bracket and a molded plastic, single-wire plug for use with the MC65 Series lights.
Filters
