This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts to the surface of the trailer ... White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires into
7-1/8" Incandescent transit light acts as a brake and tail light. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal ... Features: Round stop/tail light Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surfacemount - hardware not included Power lead and
This GloLight transit tail light is bright, easy to see, and just looks cool. It seals out moisture with the weathertight gasket. Mounts on the surface of your vehicle with screws (not included ... creates weathertight seal Built-in reflex reflector White LEDs with red lens More efficient and durable than incandescent bulbs Durable polycarbonate housing and acrylic lens Surfacemount Hardware not
18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Designed for refrigerated trucks and trailers. Durable polycarbonate housing and lens. Surface ... Features: Low-profile dome light provides bright white light for refrigerated trucks and trailers Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. Hardwires ... Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout. Use the built-in flange with mounting holes to secure the light. You can
From docking lights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life. volts DC Mounting: surfacemount Wiring: 12" sheathed pigtail Lifetime warranty TecNiq packs 288 white and blue LEDs in the Slim Line surfacemountlight, providing over 5,000 lumens and thousands of
Utility Lights
Rectangle
White
Blue
48L x 1-7/8W Inch
Surface Mount
Non-Submersible Lights
TecNiq
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
8-11/16" Low-profile, LED tail light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome, with a lens that snaps on so it's ... Features: Low-profile rectangular RV brake, turn, and tail light White LEDs with red lens More efficient and durable than incandescent bulbs Black ABS plastic base and snap-on lens Surfacemount
8-5/8" Incandescent RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the RV, with a lens that snaps on so it's easy to replace the bulb. It ... Features: Rectangular RV brake, turn, and tail light Incandescent bulb Red acrylic snap-on lens Easy to replace the bulb when needed Black ABS plastic base Surfacemount Hardware not included 3-Wire
LED lighting redefined sleek, IP68 sealed, rugged, lifetime warrantied fixtures for work trucks, emergency vehicles, marine use, trailers and more. volts DC Mounting: Surfacemount Wiring: 12" sheathed pigtail Lifetime warranty TecNiq packs 144 white and blue LEDs in the Slim Line surfacemountlight, providing over 2,500 lumens and thousands of
Compact, surface-mount oval marker/clearance light with bezel. Hard-wired, non-polarized 2-wire hookup (both leads are red) with 0.180" male bullet connectors. Durable polycarbonate construction. Surface-mount oval design for quick installs Polycarbonate housing and lens for impact resistance Specs: Color: Red Diodes: 4 Size/Shape: Oval Mount: Surface Connection: Hard wired; two red leads with 0.180"
5-3/8" Waterproof light with built-in rear reflex reflector displays brake, tail, and turn signals on your trailer. Mounts on the surface of the trailer and hardwires with the 3-wire pigtail ... Polycarbonate base with acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail harness hardwires to the trailer White wire for ground Brown wire for tail lights Red wire for stop and
... lens. Surfacemount. 2-Wire pigtail. bulbs to replace - no brittle filaments Durable die-cast aluminum housing and polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surfacemount - hardware included 2-Wire pigtail
7-9/16" LED turn and parking light is waterproof, and mounts to the surface of your trailer with the built-in flange so you don't need to cut a hole in your trailer. Hardwires with the ... Diodes: 10 Power draw at 12.8 volts: Turn signal light: 0.243 amps Parking light: 0.046 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat
Add a sleek and compliant red ID light to your trailer with this low-profile, surface-mount design. It installs with two screws and helps meet FMVSS 108 lighting standards. rating provide complete weatherproofing Durable design rated for over 100,000 hours of LED performance Flexible mounting can install horizontally, vertically, or at an angle Specs: Mounting: Surfacemount
8-5/8" LED light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome and has a replaceable lens. It wires to your RV with the ... plastic base and replaceable acrylic lens Surfacemount with bracket (sold separately) Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal
5-5/8" Waterproof LED light displays brake, tail, and turn signals on your trailer. It mounts to the surface of your trailer with the built-in flange that doubles as a reflector and hardwires ... with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer FMVSS
3-3/8" Long x 2-3/8" wide x 2-3/16" deep. Round, incandescent trailer light illuminates your license plate. Chrome-plated steel housing. Surfacemount with mounting ears. Single wire ... Features: Light angles down to illuminate your trailer's license plate Incandescent bulb is replacable Durable, chrome-plated steel housing Clear polycarbonate lens Surfacemount to trailer
Dependable LED lighting that outperforms engineered, built in the USA, backed by lifetime warranty. From trailers to trucks to marine, its durable, bright, and ready for anything. volts DC Mounting: Surfacemount Wiring: 12" sheathed pigtail Lifetime warranty TecNiq packs 216 white and blue LEDs in the Slim Line surfacemountlight, providing over 4,000 lumens and thousands of
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Yellow LEDs are more energy efficient, last longer, and burn brighter than incandescents. Use button or wire ... bulbs. You won't have to worry about replacing bulbs that have brittle filaments. And because LEDs draw minimal power, the light won't drain your battery or overload your circuits. Surface-Mount
4-1/2" x 2-7/8" x 1". Low-profile dome light illuminates an RV's interior with bright white light. Toggle switch controls power. Durable polycarbonate lens and housing. Surface ... Features: Low-profile, rectangular dome light provides bright white light for your trailer's interior Built-in toggle switch controls on/off function Durable surface-mount technology (SMT
18" Low-profile, LED tail light displays brake, tail, and turn signals on your RV that's over 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail ... Features: Low-profile RV brake, turn, and tail light Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Mounts on surface of
2-5/16" x 2-5/16". LED security light illuminates your RV's exterior with what white light to deter unwanted guests. Surfacemount - hardware not included. 2-Wire pigtail. systems Mounts on surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire Specs: Dimensions: 2-5/16" long x 2-5/16" tall x 7/16" deep Light type: warm
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Warm white LEDs are more energy efficient, last longer, and burn brighter than incandescents. The light ... battery, overload your circuits, or produce too much heat. Surface-Mount, Bolt-On Installation is Easy This surface-mount puck light is incredibly easy to install as an upgrade or a direct replacement of
11" Weatherproof light displays brake, tail, and turn signals on your trailer. Built-in reflector increases light output. Mounts on the surface of your trailer and hardwires with the included ... red lens More efficient and durable than incandescent bulbs Weatherproof polycarbonate lens and housing Surfacemount to trailer Hardware not included 6-Wire pigtail harness hardwires to trailer DOT and
Filters
