Enhance your towing experience by expanding your field of vision with these towing mirrors. Custom-fit mirrors slide over your vehicle's factory mirrors to improve sightlines while towing your trailer. Tool-free installation.The housing of each slide-on mirror is constructed of durable ABS plastic, as are the included components. This set fits factory mirrors like those pictured above. These towing mirrors are designed to seamlessly fit the contours of your factory side-view mirrors.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and nuts included.
Converter charger changes AC shore power to DC power to run 12V loads and quickly charge your RV batteries at the campground. Lets you select between flooded lead acid, AGM, and LiFePO4 batteries and stores your charging profile for future use.Features: Converter charger changes AC shore power to DC power to quickly charge your RV batteries Provides continuous power to your DC breaker panel to run 12V loads Works with flooded lead acid, AGM, and lithium-ion batteries Can also be set at a fixed output of 13.6 VDC Charging system senses battery voltage and decreases current as the battery approaches full charge Provides automatic multistage charging to extend battery life Built-in safety features protect your RV's electrical system UL listed Status remote pendant connects to the accessory port and allows you to monitor and control the converter Made in the USA Specs: Application: 12V battery systems Rated power output: 725 watts Amperage output: 45 amps Voltage: Input: 105 - 130 VAC Output (no load): 14.7 VDC Output (full load): > 13.6 VDC Temperature ranges: Operating range: 32 F to 122 F Storage range: -4 F to 176 F Cable length: 30" Dimensions: 7-1/4" long x 8-1/4" wide x 4-1/2" deep Weight: 4.5 lbs 2-Year limited warranty
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop Leg Adjustment: Drop leg extends up to 4-1/2" for extra lift when you need it. Built to Last: E-coat and black powder coat help prevent rust and corrosion for the long haul.
Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.Features: Has 2" square receiver opening, ideal for hitch accessories such as bike racks and cargo carriers Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers Fits 4 x 4-1/2" bumpers when using second set of holes Matte black powder coat finish resists corrosion Includes mounting hardware Weight capacity: 3,500 lbs GTW / 350 lbs TW Specs: Application: 4" x 4" and 4" x 4-1/2" Square RV bumpers Overall dimension: 8" tall x 4" wide x 5-1/4" deep Hitch weight: 7.4 lbs Limited lifetime warranty Note: Bumper weight capacities vary by manufacturer.
Heavy-duty carrier lets you safely mount a spare trailer tire in a sleek way. It features an offset design that provides extra clearance and crossed U-bolts for added strength, and it resists corrosion. Holds 4-lug and 5-lug wheels up to 15".Features: Heavy-duty carrier provides a mounting point for your trailer's spare tire Offset design ensures that the tire sits farther away from the ground and from your boat Crossed U-bolt design reinforces strength and increases weight capacity Includes 1 standard set and 1 longer set of U-bolts Galvanized steel carrier and zinc-plated hardware are sturdy and resists corrosion Zinc coated mounting hardware (included) resists corrosion Specs: Application: trailer frames 1" to 3-1/2" wide x up to 4" tall Fits: 4-lug and 5-lug wheels, up to 15" Compatible with 4 on 4, 5 on 4-1/2, and 5 on 4-3/4 bolt patterns Not compatible with 5 on 5 or 5 on 5-1/2 bolt patterns Trailer mounting U-bolt dimensions (center to center): Width: 2" Height: 4-1/2" Wheel mounting surface: Width: 3" Height: 6-1/8" Bolt hole spacing (center to center): 4-1/2" This sturdy spare tire carrier mounts to the trailer tongue in the front of the trailer.
Gooseneck coupler fits a 2-5/16" ball and has 8" of adjustment to fit your application. The curved internal ball clamp creates a tight fit for the hitch ball. A protected hidden spring latch is durable and easy to use.Features: Gooseneck coupler lets you hook your gooseneck trailer up to your tow vehicle Curved internal ball clamp secures hitch ball and provides a strong, tight fit Spring-loaded handle for easy hookup Hidden spring latching mechanism protects moving parts 2 Set screws secure inner tube at desired height Low-profile design gives a sleek appearance Sturdy steel construction Load bearing pin included SAE J2638 certified Weld-on installation Outer tube welds directly to your gooseneck trailer Specs: Ball size: 2-5/16" Range of vertical adjustment: 8" Height: Retracted: 30" Extended: 38" Outer tube diameter: 4-1/2" Inner tube diameter: 4" Inner tube wall thickness: 0.24" Hole spacing: 2-11/16" from center of hole to center of hole Hole diameter: 7/8" Weight capacity: 25,000 lbs 1-Year warranty
Complete single-axle disc brake set offers better performance and increased stopping power for your trailer. Includes 2 hub-and-rotor assemblies, 2 calipers and 2 mounting brackets, all Dacromet-plated for superior corrosion resistance.Features: Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than drum brakes Lower maintenance costs than for drum brakes Fewer moving parts to repair or replace Set includes 2 hub-and-rotor assemblies, 2 calipers, 2 mounting brackets, races and bolts Hardware for attaching bracket to flanges sold separately Brake lines, grease caps, seals and bearings sold separately Dacromet plating for increased durability - great for saltwater applications 500-Hour salt-spray rating Specs: Fits: Axle capacity: 3,500 lbs Wheel size: 14" to 15" Bolt pattern: 5 on 4-1/2" 3-Year warranty Bearings, Races, and Seal Information Bearings (sold separately) Inner bearing: L68149 Outer bearing: L44649 Races (sold separately) Inner race: L68111 Outer race: L44610 Seal (sold separately): RG06-050 Inner diameter: 1.719" Outer diameter: 2.565" Please note: Disc brakes require a higher line pressure (1,500 psi) than standard drum brakes (1,000 psi).
Gooseneck coupler fits a 2-5/16" ball and has 8" of adjustment to fit your application. The curved internal ball clamp creates a tight fit for the hitch ball. A protected hidden spring latch is durable and easy to use.Features: Gooseneck coupler lets you hook your gooseneck trailer up to your tow vehicle Curved internal ball clamp secures hitch ball and provides a strong, tight fit Spring-loaded handle for easy hookup Hidden spring latching mechanism protects moving parts 2 Set screws secure inner tube at desired height Belly band on bottom of outer tube adds strength and durability Low-profile design gives a sleek appearance Sturdy steel construction Load-bearing pin included SAE J2638 certified Weld-on installation Outer tube welds directly to your gooseneck trailer Specs: Ball size: 2-5/16" Range of vertical adjustment: 8" Height: Retracted: 30" Extended: 38" Outer tube diameter: 4-1/2" Inner tube diameter: 4" Inner tube wall thickness: 0.24" Hole spacing: 2-11/16" from center of hole to center of hole Hole diameter: 7/8" Weight capacity: 30,000 lbs 1-Year warranty
Gooseneck coupler fits a 2-5/16" ball and has 8" of adjustment to fit your application. The curved internal ball clamp creates a tight fit for the hitch ball. A protected hidden spring latch is durable and easy to use.Features: Gooseneck coupler lets you hook your gooseneck trailer up to your tow vehicle Curved internal ball clamp secures hitch ball and provides a strong, tight fit Spring-loaded handle for easy hookup Hidden spring latching mechanism protects moving parts 2 Set screws secure the inner tube at your desired height Belly band on bottom of outer tube adds strength and durability Low-profile design gives a sleek appearance Sturdy steel construction Load-bearing pin included SAE J2638 certified Weld-on installation Outer tube welds directly to your gooseneck trailer Specs: Ball size: 2-5/16" Range of vertical adjustment: 8" Height: Retracted: 32" Extended: 40" Outer tube width: 4-1/2" Inner tube width: 4" Inner tube wall thickness: 0.24" Hole spacing: 2-11/16" from center of hole to center of hole Hole diameter: 7/8" Weight capacity: 25,000 lbs 1-Year warranty
Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.Features: Landing gear set lets you raise and lower your trailer Ideal for standard agricultural, construction, and industrial trailer applications 2 Speeds make cranking faster and easier Low gear offers full lifting power at a ratio of 1" every 34-1/2 turns High gear provides ultimate speed with 1" for every 4-1/2 turns Traditional gearbox requires you to reposition crank to switch gears Drop legs with spring return increase overall extension for maximum adjustability Plunger pins positioned to the side Footplates minimize sinking in soft ground Landing gear welds onto trailer frame Sidewind handle and connecting rod included Specs: Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 50,000 lbs 25,000 lbs per jack Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Made in the USA with a wear-resistant, self-lubricating lining, this surge actuator will work smoothly for years to come. EZ-Latch coupler ensures you'll always have a strong, secure connection. Zinc plating makes it great for boat trailers.If you're looking for an actuator that lets you "set it and forget it", this one from Demco could be a great option for you. The solenoid on this electric lockout ties into the reverse light circuit on your 5-pin, 6-pin, or 7-pole connector so that your disc brakes won't engage when your reverse lights come on.
Extend the receiver on your 2017 or newer Ford Super Duty factory 3" hitch to clear obstacles such as your bed-mounted camper. Exclusive, heavy-duty design maintains high weight capacity and gives you a 2-1/2" receiver.The connection between the extension and your hitch is reinforced with a set bolt underneath the shank that tightens up to the receiver for a snug fit and prevents rattle and movement in hitch. To give you absolute peace of mind, lateral support chains connect to the hitch and the extension on either side of your setup.
Enhance your towing experience by expanding your field of vision with these towing mirrors. Custom-fit mirrors slide over your vehicle's factory mirrors to improve sightlines while towing your trailer. Tool-free installation.The housing of each slide-on mirror is constructed of durable ABS plastic, as are the included components. This set fits factory mirrors like those pictured above. These towing mirrors are designed to seamlessly fit the contours of your factory side-view mirrors.
Multipurpose trailer lets you haul your jon boat, kayak, or personal watercraft. Adjustable bunks can be set front to back or side to side to hold various boat types. 11' 8" Long trailer with 8" wheels supports boats up to 12' long.Install the bunk boards so that they are positioned across the trailer's frame to tow your kayak or surfboard. The bunks provide enough cargo space to tow 2 kayaks at once. Set the trailer's bunks front to back to hold your jon boat, pontoon boat, or inflatable. You can also adjust the tilt of the bunks to contour to your boat's hull when towing a canoe or dinghy.
Heavy-duty and easy to use, this surge actuator engages your trailer's disc brakes and keeps them from locking up when you launch your boat. EZ-Latch coupler with a 4" drop keeps you from second guessing your connection. Made in the USA.If you're looking for an actuator that lets you "set it and forget it", this one from Demco could be a great option for you. The solenoid on this electric lockout ties into the reverse light circuit on your 5-pin, 6-pin, or 7-pole connector so that your disc brakes won't engage when your reverse lights come on.
Complete trailer security made simple. Three keyed-alike locks and a case to keep your gear together. One key fits them all, so you spend less time fumbling with keys and more time on the road doing what you came to do.
Towing different trailers is such a hassle. Not with this ball mount. You can switch between 2" and 2-5/16" balls and adjust the height for any trailer in seconds. Plus it can rotate to stow underneath your hitch, saving your shins.Features: Dual ball mount with built-in hitch balls lets you switch between trailer sizes in seconds 2" shank slides into your hitch receiver opening Rotating 2" and 2-5/16" balls are chrome plated for rust and corrosion resistance Adjustable height settings let you tow trailers of different heights with the same vehicle Height adjustment holes are engineered to create the ideal height for any truck and trailer combination Slide ball mount up or down and secure in place with included stainless steel pins and clips Anti-theft design ensures the adjustable arm and 2-ball mount cannot be removed when using locking pins (sold separately) Stowable design easily rotates to store underneath your hitch Simply remove the pins holding ball mount to the arm, rotate it under the hitch and reinsert pins Protects the ball mount from damage, as well as your tailgate and everyone's shins Built for long-lasting performance and demanding tasks in all environments Constructed of solid forged steel for strength and durability Finished with black corrosion-resistant coating to withstand anything your journey might throw at it Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight capacity: When used with 2" ball: 8,000 lbs When used with 2-5/16" ball: 18,000 lbs Maximum drop: 4-1/2" Maximum rise: 4-1/2" Incremental height adjustment: 1" Center of first hitch pin hole to center of ball: 9-3/8" Center of second hitch pin hole to center of ball: 10-1/2" Center of second hitch pin hole to end of shank: 2-3/8" 1-Year warranty
Extend the receiver on your Ford Super Duty factory 3" hitch to clear obstacles such as your bed-mounted camper. Exclusive, heavy-duty design maintains high weight capacity and gives you a 2-1/2" receiver.The connection between the extension and your hitch is reinforced with a set bolt underneath the shank that tightens up to the receiver for a snug fit and prevents rattle and movement in hitch. To give you absolute peace of mind, lateral support chains connect to the hitch and the extension on either side of your setup.
Rustproof aluminum wheel features a bold design in glossy black with machined black accents. Steel inserts in lug nut wells secure wheel. Built for everyday trailers, haulers, and campers.The 15" x 5" dimensions and 0 offset keep the load evenly distributed, while the 5 on 4-1/2" bolt pattern and 3.19" pilot diameter make it easy to match up with a strong hub setup. When paired as a set, these wheels deliver the kind of combined capacity that keeps your trailer stable under full load.
Lockset includes a sturdy aluminum coupler lock to prevent towaway theft, a 1/4" diameter latch lock to ensure that your trailer won't be unhooked from the coupler, and a 2" trailer hitch receiver lock. Keys work with all three locks.Arm your setup with this set of etrailer locks. This kit contains all the locks you need to guard your setup from theft, including a coupler lock, a coupler latch lock, and a hitch receiver lock.
Lockset includes sturdy aluminum coupler lock to prevent towaway theft, 1/4" diameter latch lock to ensure that your trailer won't be unhooked from coupler, and 2" or 2-1/2" trailer hitch receiver lock. Keys work with all 3 locks.
Complete trailer security made simple. Three keyed-alike locks and a case to keep your gear together. One key fits them all, so you spend less time fumbling with keys and more time on the road doing what you came to do.
Hook up fast and tow with confidence. This 25K gooseneck coupler self-latches for easy hookup, while the ball clamp ensures a tight fit. The 8" adjustment keeps your trailer level for a smooth, secure tow.Specs Capacity: Gross towing weight: 25,000 lbs Vertical load limit (maximum tongue weight): 6,250 lbs Tube Measurements: Outer tube diameter: 4-1/2" Inner tube wall thickness: 0.512" Height adjustment: 8"
Filters
