Replaces the magnet retainer clips for your round brake magnet for 12" electric brake assemblies.Features: Replaces the magnet retainer clips for your round brake magnet for 12" electric brake assemblies Quantity: 1 clip
Replaces the magnet retainer clips for your oval brake magnet for 10" or 12" electric brake assemblies.Features: Replaces the magnet retainer clips for your oval brake magnet for 10" or 12" electric brake assemblies Quantity: 4 clips
Replace the worn or damaged magnet on your electric trailer brake assembly. Fits 10" assemblies with a 3,500-lb axle rating. Includes magnet, clip, and spring.Features: Replacementmagnet fits 10" trailer brake assemblies designed for 3,500-lb axles Compatible with brake assemblies from most manufacturers, including AxleTek, Dexter, Lippert (LCI), IAC, and AL-KO Oval design Dimensions: 2" long x 3-1/8" wide x 1" tall Magnet, retaining clip, and spring included
Use one of these clips to secure the magnet on your 10" or 12" electric trailer brake assembly. Includes 10 clips.Features: Secure the brake magnet to your 10" or 12" electric brake assembly Compatible with brake assemblies from most manufacturers, including AxleTek, Dexter, Lippert (LCI), IAC, and AL-KO Quantity: 10
Replace the worn or damaged magnet on your electric trailer brake assembly. Fits 7" assemblies with a 2,000-lb axle rating. Includes magnet, clip, and spring.Features: Replacementmagnet fits 7" trailer brake assemblies designed for 2,000-lb axles Compatible with brake assemblies from most manufacturers, including AxleTek, Dexter, Lippert (LCI), IAC, and AL-KO Round design Dimensions: 1-7/8" diameter x 7/8" tall Magnet, retaining clip, and spring included
New oval style magnet kit allows you to replace the worn out magnet on your Dexter trailer brakes. The oval design increases the efficiency of the magnet while also extending the life of the magnet.Features: Magnet kit allows you to replace the worn out magnet on your Dexter trailer brakes Works as a replacement for Dexter 12-1/4" x 5" electric brake assemblies Works with 7,200-lb to 15,000-lb brake assemblies Quantity: 1 replacementmagnet
Replaces the brake magnet for your Dexter electric brake assemblies. Works with10" x 2-1/4" 4,400-lb and 12" x 2" 7,000-lb assemblies.Features: Replaces the brake magnet for your Dexter electric brake assemblies Works with: 10" x 2-1/4" 4,400-lb Brake assemblies 12" x 2" 7,000-lb Brake assemblies
Magnet kit with green wire allows you to replace the worn out magnet on 10" trailer brakes, rather than having to replace the entire assembly. ... Features: Magnet kit allows you to replace the worn out magnet on your 10" trailer brakes Saves money and time - better than replacing the entire assembly Works with the following brake assemblies: Dexter 10" x 2-1/4" 3,500-lb Nev-R-Adjust (23-468 and 23-469) Dexter 10" x 2-1/4" 3,500-lb (23-26 and 23-27) Hayes/AL-KO 10" x 2-1/2" 3,500-lb (60202803 and 60202703) Oval magnet design Increases the efficiency Extends the life Sleeve protects wires Magnet dimensions: 3-1/2" long x 2-1/8" wide x 7/8" tall
Trailer Brake Magnet for 12" Hub/Drum Fits: Dexter 12" x 2" 6K Alko 12" x 2" 6K and 7K after 1988 (not centerline) Hayes 12" x 2" 6K and 7K after 1988 (not centerline)
Magnet clips attach the brake magnet to the brake assembly Fits 10", 12" and 12-1/4" brake assemblies (that use cross-hatch center opening magnets) Quantity: 4
Replace the worn or damaged magnet on your electric trailer brake assembly. Fits 12" x 2" Dexter assemblies with a 6,000-lb axle rating. ... Features: Replacementmagnet fits 12" x 2" Dexter trailer brake assemblies designed for 6,000-lb axles Oval design Magnet, retaining clip, and spring included Dimensions: 3-5/8" long x 2-1/4" wide x 7/8" thick
Replaces a wire clip for the magnet lead wire on your trailer's electric brake assemblies. Secures the magnet lead wire on the back of the brake assembly. ... Features: Replaces a wire clip for the magnet lead wire on your trailer's electric brake assemblies Secures the magnet lead wire on the back of the brake assembly Includes 1 wire clip
Replace the worn or damaged magnet on your electric trailer brake assembly. Fits 12" assemblies with a 5,200-lb, 6,000-lb, or 7,000-lb axle rating. ... Features: Replacementmagnet fits 12" trailer brake assemblies designed for 5,200-lb, 6,000-lb, and 7,000-lb axles Compatible with brake assemblies from most manufacturers, including AxleTek, Dexter, Lippert (LCI), IAC, and AL-KO Oval design Dimensions: 2" long x 3-1/8" wide x 1" tall Magnet, retaining clip, and spring included
Trailer Ventilated Brake Magnet for Hayes and AL-KO 12-1/4" x 3-1/2" Electric Brakes Fits 9K through 12K axles Fits 9K brake after 1995 Fits 10K brake after 1987 Fits 12K brake after 1989 Will not replace the old-style oval magnet Includes clip to hold in place
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Highlights Complete Waterproof Protection: Keeps water and grit out, so your bearings and hub stay protected. Direct-Fit Replacement: Replaces factory oil bath/grease caps, O-ring, and plug for select axles. Magnetic Fill/Drain Plug: Built-in magnetic plug attracts metal particles, helping prevent wear or damage.
Replace the springs on your 10" or 12" manual-adjust electric trailer brake assembly with this kit. Includes 2 shoe return springs, 1 manual adjuster spring, 2 shoe hold-down springs, and 1 magnet spring.Features: Replaces worn or damaged springs from your manual-adjust electric brake assembly Compatible with brake assemblies from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and IAC Works with 10" or 12" manual-adjust brake assembly without a parking brake Includes: (2) 4-5/8" Long shoe return springs 1 Manual adjuster spring 2 Shoe hold-down springs 1 Magnet spring
Replace the oil/grease cap, O-ring, and plug on your 10K-16K Lippert axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal flecks. ... Features: Replaces the oil bath/grease cap, O-ring, and plug on these axles: Lippert 10K to 16K axles Direct replacement for these Lippert, Dexter, or Valcrum oil caps: Lippert: 693935 Dexter: 21-36, 21-036, or K71-148-00 Valcrum: ST-400 manufactured after 08/2019 Cap functions as either an oil bath or grease cap Magnetic vent plug attracts damaging metal particles Helps identify problems before they become critical Aluminum alloy body with black e-coat finish resists corrosion Clear viewing lens lets you quickly check oil level Easy-to-access side port lets you fill or drain lubricant without removing the cap O-ring and gasket provide a tight seal Threaded cap installs easily Includes 1 cap, 1 watertight O-ring seal, and 1 magnetic vent plug Specs: Application: 10,000-lb to 16,000-lb axles Thread outer diameter: 4" 5-Year limited warranty
The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels.Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.
The best hauls aren't about distance, they're about towing that feels steady. New Lippert ABS brake assemblies replace worn parts to bring back smooth stops and balanced tracking, so grades, crosswinds, and traffic don't shake you.Simpler Braking Setup: Works with your in-cab brake controller for smooth electric braking - no hydraulic lines required. Long-Lasting Stopping Power: Bonded brake shoes and a proven magnet design hold up to miles of towing. Features to know about Designed for Lippert ABS Braking When the unexpected happens and you have to hit the brakes hard, Lippert's ABS system steps in.
Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. ... Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.
Filters
