Replaces the broken crank handle for your Stromberg Carlson landing gear (LG-1, LG-2, LG-3, LG-4, or LG-183708).Features: Replaces the manual crank for your tandem landing gear Designed for use with Stromberg Carlson landing gear (LG-1, LG-2, LG-3, LG-4, or LG-183708) Also works with most other brands of landing gear, including Atwood and Lippert Constructed of heavy-duty steel Specs: Overall dimensions: 30" long x 10-1/2" wide Inner diameter of metal shaft where it connects to the landing gear: 1/2" Diameter of outer sleeve on landing gear end: 3/4"
Just the bones - replacement setup comes with everything but the electrical. Measures 15-1/2" between weld stops. 16" of drop leg makes up almost half of the total lift. ... Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Manual hand crank (included) lets you operate in case of power failure Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant components Black powder coat finish on the legs Aluminum housing for the gearbox Built-in grease zerk makes maintenance easy Bolt-on installation - uses your existing mounting brackets Weld stops are located on both sides of the legs - universal mount Hardware and additional mounting brackets are included if you need them Made in the USA Specs: Combined weight capacity: 6,000 lbs Total lift: 37" Screw travel : 21" Drop leg travel : 16" Extendable cross shaft: Minimum: 41" Maximum: 71" Footplate dimensions: 5" long x 7-15/16" wide Handle dimensions: 29-11/16" long x 10-3/16" wide 90-Day warranty Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Electric motor is an upgrade from manual methods Allows the lead and follow legs to work together at a faster rate Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Toggle switch will be right at home with your "current" electrical setup Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish Bolt-on installation - uses your existing mounting brackets Weld stops are located on the side facing toward your trailer frame - outside mount Hardware and additional mounting brackets are included if you need them Specs: Weight capacity: Single motor: 2,500-lbs per leg Dual motor: 5,000-lbs per leg Total lift: 34-3/4" Screw travel : 19-3/4" Drop leg travel : 15" Overall outer tube length: 33-1/2" Outer tube width: 2-1/2" Distance between weldstops: Inside to inside: 19-1/2" Outside to outside: 21-1/2" Rate of travel: 2-1/2" per minute Extendable cross shaft: Minimum: 41" Maximum: 72-3/4" 360 Watt DC motor Volts: 12 Amps: 30 Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Electric motor is an upgrade from manual methods Allows the lead and follow legs to work together at a faster rate Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Toggle switch will be right at home with your "current" electrical setup Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish Bolt-on installation - uses your existing mounting brackets Weld stops are facing the opposite leg - inside mount Hardware and additional mounting brackets are included if you need them Specs: Weight capacity: Single motor: 2,500-lbs per leg Dual motor: 5,000-lbs per leg Total lift: 34-3/4" Screw travel : 19-3/4" Drop leg travel : 15" Overall outer tube length: 33-1/2" Outer tube width: 2-1/2" Distance between weldstops: Inside to inside: 19-1/2" Outside to outside: 21-1/2" Extendable cross shaft: Minimum: 41" Maximum: 72-3/4" 360 Watt DC motor Volts: 12 Amps: 30 Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
Replaces the circuit board in your Dometic Atwood water heater (GCH6A-10E, GC6AA-10E, GC10A-4E, or GCH10A-4E). Includes one circuit board with fuse and mounting screws.Features: Replaces the circuit board in your Dometic Atwood water heater (GCH6A-10E, GC6AA-10E, GC10A-4E, or GCH10A-4E) Includes one circuit board with fuse and mounting screws Fits: Dometic Atwood water heaters: GCH6A-10E, GC6AA-10E, GC10A-4E, and GCH10A-4E
Replaces the control board in your older gas only water heater (AT94191, AT96121, and AT96136). Sends power through 4-wire control harness (AT93313 - sold separately) to the other points in the heater.
Replaces the door that came with your Atwood 6-gallon water heater with this black door assembly.Features: Replaces the door that came with your Atwood 6-gallon water heater with this black door assembly Quantity: 1 black water heater door
Replaces the door that came with your 6-gallon Atwood water heater. Protects the inner components of your water heater.Features: Replacement water heater door protects the inner components of your Atwood water heater Fits models: AT96110, AT96163, AT96121, and AT96136 Flush-mount installation for RV cabinets designed to house a 6-gallon water heater Can also be installed below the floor or behind baggage door to save RV space Mounting hardware sold separately White color Made in the USA
Replaces the on/off switch that came with your Atwood water heater. Operates either the gas burner or the electric heating element in your water heater. ... Features: Replaces the single-panel switch that came with your Atwood water heater Works with models AT96136, AT96121, and AT94191 Allows you to power either the gas burner or electric component Mounts to the wall for easy access in your coach Black color Voltage: 12 volts Made in the USA
Replaces a 10-pin to 4-pin adapter for Dometic Atwood water heater circuit boards.Features: Replaces a 10-pin to 4-pin adapter for Dometic Atwood water heater circuit boards Fits: Older Atwood Dometic water heaters with 4-pin connectors
Replaces the door that came with your 10-gallon Atwood water heater. Protects the inner components of your water heater.Features: Replacement water heater door protects the inner components of your Atwood water heater Fits models: AT94191, AT94186, AT94180, AT94022, and AT94023 Flush-mount installation for RV cabinets designed to house a 10-gallon water heater Can also be installed below the floor or behind baggage door to save RV space Specs: Door dimensions: 17-1/2" tall x 18" wide White color Fits: Atwood RV water heaters: AT94191, AT94186, AT94180, AT94022, and AT94023
Replaces 1 machined motor mounting bolt for Atwood standard-duty, heavy-duty, and super-duty fifth-wheel landing gear. Lock washer (AT86111) sold separately.Features: Replaces 1 machined motor mounting bolt for Atwood 5th-wheel landing gear Inserts through the motor and attaches to the landing gear plate Works in conjunction with lock washer (AT86111 - sold separately) Specs: Application: Atwood standard-duty, heavy-duty, and super-duty 5th-wheel landing gear Dimensions: 1/4" diameter x 3-1/2" long Quantity: 1 replacement bolt
Direct factory replacement for Atwood gas pilot assembly. Complete step-by-step instructions included. 9" Long.Features: Gas pilot assembly is a direct factory replacement Fits Atwood Instructions included Length: 9" 08773 Camco Motor Home Replacement Gas Pilot Assembly for Atwood - 9 Inches Long
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LG-142178 - sold separately). Retracted height is 32-3/4". Extended height is 53-1/4".
Perfect for Class A motorhomes with HWH and Atwood leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. ... Features: Heavy-duty rubber pads snap onto your Class A motorhome's HWH or Atwood leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A motorhomes (see chart below) with HWH or Atwood leveling systems and (4) 10" round jack feet Dimensions: 11-3/4" long x 11-3/4" wide x 2" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
This on/off switch operates either the gas burner or the electric heating element in your Atwood water heater. Mounts to the wall in your coach for easy access.Features: Single-panel switch lets you power either the gas or electric component of your Atwood water heater Works with models AT96136, AT96121, and AT94191 Mounts to the wall for easy access in your coach White color Voltage: 12 volts Made in the USA
Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity. Handle arm has a corrosion-resistant, zinc finish. ... Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity Designed for TJD-7000S Series jacks Durable, zinc-finished handle arm resists corrosion Includes handle, pins, bushings, and gear
Replaces the crank handle for your Stromberg Carlson electric trailer jack (JET-2500, JET-3555, JET-3755, or JET-5000). Allows you to manually crank your jack in case there is no electricity available.Specs: Socket size: 7/16" Features: Replaces the crank handle on your Stromberg Carlson electric A-frame tongue jack Fits the following models: JET-2500, JET-3555, JET-3755, or JET-5000
Replacementhandle shaft fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Durable, zinc finish resists corrosion. ... Features: Replaces the handle shaft on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity Crank handle attaches to this shaft Designed for TJD-12000 Series jacks Includes hardware Overall dimensions: 12" long x 1" diameter
Replaces the sidewind handle from your etrailer or Ram swivel marine jack. Grooved handle grip allows for comfortable, easy cranking. Designed for MJ-1000BBX Series jacks.Features: Replaces the sidewind handle from your etrailer or Ram swivel marine jack Designed for use with MJ-1000BBX Series jacks Grooved, black handle grip allows for comfortable, easy cranking Includes bolt and nut for installation
Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX). Includes 10 mm socket on end of crank handle.Features: Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX) Includes 10 mm socket on end of crank handle
Replaces the topwind handle from your etrailer or Ram square, direct-weld jack with a 3K - 7K capacity. Handle allows you to manually crank the jack. ... Features: Replaces the topwind handle on your etrailer or Ram square, direct-weld jack with a 3,000 - 7,000-lb capacity Fits TJD-5000 and TJD-7000 Series jacks Claw knob allows for comfortable, easy cranking Durable, zinc-finished handle arm resists corrosion Folds in when not in use
Replace the crank from your etrailer or Ram landing gear set (RVLG-8HDL). In case of power or mechanical failure, this crank handle will let you manually retract or extend the fifth-wheel landing gear legs.Features: Replaces the crank handle from your etrailer or Ram 5th-wheel landing gear set (RVLG-8HDL) Durable steel construction with corrosion-resistant zinc-plated finish Handle radius: 8-1/2"
Filters
