Your arm stalls mid-crank trying to lift a loaded boat trailer at the ramp. Been there. This 1,500 lb aluminum swivel jack accepts a 3/4" socket so a drill does the lifting. The wheel rolls the trailer into place and holds up to saltwater use.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb swivel jack uses a drill adapter so the lift happens without the handle. It pivots up for clearance, and the SnapPad stays planted on soft ground.
Your arm stalls mid-crank with a loaded tongue. Been there. This swivel bolt jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. It pivots up for clearance, and hitching doesn't drag on.
... This replacement roof vent with pivoting fan lets you aim airflow where it matters, helping your cabin stay fresh and breathable from daybreak to bedtime. Pre-Order Now!
Replaces the suction-cup mount for the 5" monitor (732556) or 7" monitor (405342ET or 729936) on your Furrion Vision S camera system.Features: Replaces the suction-cup mount for the 5" monitor (732556) or 7" monitor (405342ET or 729936) on your Vision S camera system Quantity: 1 suction cup mount Note: If you have a Vision S camera system with a 4.3" monitor, order part number LC776462.
Replaces the suction cup mount for your Furrion Vision S wireless RV backup camera system (FOS43TASF) with a 4.3" monitor.Features: Replaces the suction cup mount for your Furrion Vision S wireless RV backup camera system (FOS43TASF) with a 4.3" monitor Quantity: 1 suction cup mount Note: If you have a Vision S camera system with a 5" or 7" monitor, order part number FR79SR.
Hey Bill, the Rain Blocker G2 Front Panel for Thule 10' HideAway Awning #TH301320 comes with the needed install hardware to attach to a Thule Hideaway Awning #TH490011 but not to a roof directly. Do you have a Hideaway awning already? I attached…
Hey Nancy! The Thomas Payne RV Jackknife Sofa w/ Hinges #TP58KR doesn't have any legs. It is designed to sit on an existing base/legs which you can see examples of in the attached picture. I can't tell in the brochure if that is what you have…
Hey Kevin! Are you replacing it because you're upgrading to lithium or is there a specific reason you don't like it? WFCO products are pretty nice, and the new WFCO Auto-Detect RV Converter Charger #WF38FR would be the direct replacement.…
Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…
Hey Edwin! If the listed dry tongue weight is 1,330 lbs you will likely be over the rating of your current SwayPro spring bars. You'll probably be adding 150-200 lbs with the propane and batteries, but that does depend on the number of propane…
Hi Riley, Both Air Lift and Firestone transitioned to no longer offering the replacement brackets because people were purchasing the wrong ones constantly and it was causing a confusion and issues. It was also more expensive to purchase every single…
Hey Robert, congrats on the new 5th wheel trailer! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box like item #MR47MV has not been approved for use by Lippert. The only gooseneck style pin box that has are the Reese Goose Boxes like item #RP85FR.…
I recommend disconnecting 12V electrical power from the main system control panel for a few minutes. Usually about 15-minutes without power does it. Once reconnected to power if you still have error codes, such as "Out-of-Stroke", to clear…
Hey Sam! Yes, the BTBRV Magnetic Hitch Receiver Reducer Set #BTBRV39FR can be used for weight distribution. The reducer sleeves do not cause any kind of reduction in capacity so it is perfectly fine to use with your WDH shank. What kind of trailer…
The link plate on the Sway-Control Bracket #EQ95-01-5600 is 1-1/2" wide(see image). The good news is in the event it is too big you can reposition the Propane Tank Pan #37207-31535 on your trailer if it needs moved. You will have self taping…
Hey Christopher, Yes, Equal-i-zer offers longer inner and outer link plates for 8" frames #EQ84FR and 10" frames #EQ24FR to accommodate your larger frame size.
Hey Ira, to use an Equal-i-zer system with a 8 inch tall frame what you'd need is the part #EQ84FR which replaces the inner and outer link plates for the spring bar hanger with ones that can fit an 8 inch tall frame.
Replaces a damaged fan motor on your RV range hood or roof vent. If replacing an older model motor, a new fan blade (sold separately) is also required. Fits Ventline P, S0721, B, and T Series range hoods and Ventadome or Vanair roof vents.Features: Replaces 12V DC fan motor for your RV range hood or roof vent Fits: Ventline P, S0721, B, and T Series range hoods Ventadome or Vanair roof vents Certified by an independent laboratory to meet CSA standards for use in Canada Includes wiring and mounting hardware Specs: Motor length: 1-1/2" Motor output: 1.2 amps at 13.6 volts DC If you are replacing an older motor, then you'll have to order a new, compatible fan blade (sold separately) along with the replacement motor. To determine if you have an old motor, measure the length of the motor from end to end.
Replace the crank handle that came with your Lippert Components manual scissor jack with this new one. Crank handle assists in lowering and raising your scissor jack on your RV or trailer.Features: Manual crank handles can become easily lost at the campsite. Order your replacement crank handle here! Standard Lippert Components manual scissor jack crank handle Can also be used with Lippert power tongue jacks in the event of a power failure 3/4" Hex socket 90-Day warranty
Replaces a damaged fan motor on your RV range hood or roof vent. If replacing an older model motor, a new fan blade (sold separately) is also required. Fits Ventline P, S0721, B, and T Series range hoods and Ventadome or Vanair roof vents.However, older fan blades won't fit on the new motor; so, if you are replacing an older motor, you should order a new, compatible fan blade with your replacement motor. To determine whether you have an old or new motor, measure the length of the motor from end to end (excluding shafts and mounting hardware, measuring just the case.)
Filters
