This leveling system contains everything you need to stabilize your trailer or RV at home or the campsite. High-impact polyurethane resists damage and is treaded for maximum grip. ... Features: Comprehensive kit easily levels your trailer or RV Includes 2 levelers, 2 wheel chocks, and 4 jack pads Compact levelers help your trailer stay flat on any surface Adjust to any height up to 4-1/2" Works with tires sizes up to 32" wide Ribbed bottom keeps ramps firmly in place on the ground Treaded surface grips your tire for added stability Heavy-duty wheel chocks keep your trailer from rolling when it's parked and leveled Drainage holes prevent water buildup from reducing traction Jack pads serve as stabilizing cushions so the leveling system won't sink into the ground Connectable design allows the system to nest together for compact storage High-impact polyurethane holds up under tremendous weight Resists scuffs and abrasions Specs: Quantity: 2 leveling ramps, 2 wheel chocks, and 4 jack pads Ramp dimensions: 16-9/16" long x 14-9/16" wide x 4-1/2" tall System weight: 9.9 lbs 1-Year warranty
... Includes 2 levelers, 2 chocks, and a carry bag.The Andersen CamperLeveler lets you drive on until your trailer is perfectly level, then secure the wheel with the included chock. It's fast, intuitive, and accurate - perfect for setting up while solo.
Features: Provides leveling at any increment from 1/2" to 4" Works great on trailers up to 30,000 lbs with up to 32" diameter tires Customize to fit your specific application by trimming up to 4" off the chock Includes 1 leveler and 1 chock Leveler dimensions: 15-5/8" long x 6" wide x 4-1/4" tall Chock dimensions: 7-3/4" long x 6" wide x 3-1/4" tall Made in the USA Lifetime part replacement
Raise your trailer quickly and effectively with the Rapid Jack from Andersen Manufacturing. Simply drive your trailer onto the jack for a quick boost. Also functions as a leveler for single-axle trailers and as a trailer jack base.Features: Raise trailer wheels quickly and easily Drive good wheel of double-axle trailer onto the jack to raise the other axle and change the bad tire Level wheels of single-axle trailers Place small end of jack under wheel and drive up until level Will not work as leveler for multi-axle trailers because the jack is too large to fit in between tires To level multi-axle trailers, use the RapidCamperLeveler instead (AM3604) Use as a trailer jack base by turning the Rapid Jack on its side and resting the shaft of your trailer jack in the molded circle Includes rubber grip to prevent slipping Made in the USA Specs: Leveler height: 6-7/8" Leveler length: 17" Width: 6" Constructed from recycled plastic materials (100 percent) Weight capacity: 20,000 lbs 1-Year limited warranty
... The greaseless dual-ball combo gives you 2" and 2-5/16" balls and 6" of drop/rise adjustability keep you level, clean, and ready for whatever the road throws your way.High towing capacity: Up to 12,500 lbs with the 2-5/16" ball. Features to know about Adjustable Height for Level Towing The Andersen Rapid Hitch offers a 6" drop or rise, allowing you to adjust your hitch to the perfect height for level towing, enhancing safety and performance.
Tow up to 8,000 lbs with supreme safety and the convenience of an adjustable 4" drop and 4" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (1-7/8" and 2"). Fits 2" hitches.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 4" drop and 4" rise (adjustment pin included) Recommended for vehicles with 20" or less from the ground to the top of the receiver opening when vehicle is level (includes many light-duty trucks and SUVs) Allows towing of various trailers with the same ball mount 2 Hitch pin holes allow for further adjustment 2 Zinc-plated steel hitch balls included 2-Sided platform has 1-7/8" diameter ball on one side and 2" diameter ball on the other Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals Locking pin set sold separately Made in the USA Specs: Fits: 2" x 2" trailer hitch receivers Also compatible with 2-1/2" x 2-1/2" hitch receivers when using 2-1/2" to 2" adapter sleeve (sold separately) Ball diameters: 1-7/8" and 2" Towing capacity: 7,500 lbs GTW with 1-7/8" hitch ball 8,000 lbs GTW and 1,500 lbs TW with 2" hitch ball Maximum rise: 4" Maximum drop: 4" Measurement from center of short hitch pin hole to center of ball hole: 8-1/4" Measurement from center of long hitch pin hole to center of ball hole: 9-5/8" 1-Year limited warranty
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 5-1/2" drop and 6-1/2" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (2" and 2-5/16"). Fits 2" hitches.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 5-1/2" drop and 6-1/2" rise (adjustment pin included) Recommended for vehicles with 20" - 24" from the ground to the top of the receiver opening when vehicle is level (includes most standard pickups) Allows towing of various trailers with the same ball mount 2 Hitch pin holes allow for further adjustment 2 Zinc-plated steel hitch balls included 2-Sided platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals 5/8" Diameter locking pin set sold separately Made in the USA Specs: Fits: 2" x 2" trailer hitch receivers Also compatible with 2-1/2" x 2-1/2" hitch receivers when using 2-1/2" to 2" adapter sleeve (sold separately) Ball diameters: 2" and 2-5/16" Towing capacity 8,000 lbs GTW with 2" hitch ball 10,000 lbs GTW and 1,500 lbs TW with 2-5/16" hitch ball Maximum rise: 6-1/2" Maximum drop: 5-1/2" Measurement from center of short hitch pin hole to center of ball hole: 8-1/4" Measurement from center of long hitch pin hole to center of ball hole: 9-5/8" 1-Year limited warranty
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 5-1/2" drop and 6-1/2" rise with the Rapid Hitch ball mount system. Includes greaseless aluminum ball combo (2" and 2-5/16"). Fits 2" hitches.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 5-1/2" drop and 6-1/2" rise (adjustment pin included) Recommended for vehicles with 20" - 24" from the ground to the top of the receiver opening when vehicle is level (includes most standard pickups) Allows towing of various trailers with the same ball mount 2 Hitch pin holes allow for further adjustment 2 Greaseless Alumiball hitch balls included 2-Sided platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals Greaseless nylon cap allows for easy rotation between ball and coupler when towing Locking pin set sold separately Made in the USA Specs: Fits: 2" x 2" trailer hitch receivers Also compatible with 2-1/2" x 2-1/2" hitch receivers when using 2-1/2" to 2" adapter sleeve (sold separately) Ball diameters: 2" and 2-5/16" Towing capacity 8,000 lbs with 2" hitch ball 10,000 lbs with 2-5/16" hitch ball Maximum rise: 6-1/2" Maximum drop: 5-1/2" Measurement from center of short hitch pin hole to center of ball hole: 8-1/4" Measurement from center of long hitch pin hole to center of ball hole: 9-5/8" 1-Year limited warranty The greaseless AlumiBall is a solid aluminum hitch ball topped with a nylon cap.
This adjustable ball mount offers up to a 10" drop and an 11" rise. Fits 2" hitches. Tow up to 10,000 lbs with the 2-5/16" ball and up to 8,000 lbs with the 2" ball. Greaseless ball combo makes for mess-free towing.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 10" drop and 11" rise (adjustment pin included) Recommended for vehicles with greater than 24" from the ground to the top of the receiver opening when vehicle is level (includes many larger pickups) Allows towing of various trailers with the same ball mount 2 Greaseless Alumiball hitch balls included 2-Sided platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other Hitch balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals Greaseless nylon cap allows for easy rotation between ball and coupler when towing Locking pin set sold separately Made in the USA Specs: Fits: 2" x 2" trailer hitch receivers Also compatible with 2-1/2" x 2-1/2" hitch receivers when using 2-1/2" to 2" adapter sleeve (sold separately) Ball diameters: 2" and 2-5/16" Gross trailer weight With 2" ball: 8,000 lbs With 2-5/16" ball: 10,000 lbs Tongue weight: 1,500 lb Maximum rise: 11" Maximum drop 10" Measurement from center of hitch pin hole to center of ball hole: 9-1/4" 1-Year limited warranty The greaseless AlumiBall is a solid aluminum hitch ball topped with a nylon cap.
Tow up to 8,000 lbs with supreme safety and the convenience of an adjustable 10" drop and 11" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (1-7/8" and 2"). Fits 2" hitches.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 10" drop and 11" rise (adjustment pin included) Recommended for vehicles with greater than 24" from the ground to the top of the receiver opening when vehicle is level (includes many larger pickups) Allows towing of various trailers with the same ball mount 2 Zinc-plated steel hitch balls included 2-Sided platform has 1-7/8" diameter ball on one side and 2" diameter ball on the other Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals Locking pin set sold separately Made in the USA 1-Year limited warranty Specs: Fits: 2" x 2" trailer hitch receivers Also compatible with 2-1/2" x 2-1/2" hitch receivers when using 2-1/2" to 2" adapter sleeve (sold separately) Ball diameters: 1-7/8" and 2" Towing capacity 7,500 lbs with 1-7/8" hitch ball 8,000 lbs with 2" hitch ball Tongue weight capacity: 1,500 lbs using either hitch ball Maximum rise: 11" Maximum drop: 10" In the drop postion, ball mount only adjusts from 4" - 10" Measurement from center of hitch pin hole to center of ball hole: 9-1/4"
Tow up to 8,000 lbs with supreme safety and the convenience of an adjustable 5-1/2" drop and 6-1/2" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (1-7/8" and 2"). Fits 2" hitches.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 5-1/2" drop and 6-1/2" rise (adjustment pin included) Recommended for vehicles with 20" - 24" from the ground to the top of the receiver opening when vehicle is level (includes most standard pickups) Allows towing of various trailers with the same ball mount 2 Hitch pin holes allow for further adjustment 2 Zinc-plated steel hitch balls included 2-Sided platform has 1-7/8" diameter ball on one side and 2" diameter ball on the other Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals Locking pin set sold separately Made in the USA 1-Year limited warranty Specs: Fits: 2" x 2" trailer hitch receivers Also compatible with 2-1/2" x 2-1/2" hitch receivers when using 2-1/2" to 2" adapter sleeve (sold separately) Ball diameters: 1-7/8" and 2" Towing capacity 7,500 lbs with 1-7/8" hitch ball 8,000 lbs with 2" hitch ball Maximum rise: 6-1/2" Maximum drop: 5-1/2" Measurement from center of short hitch pin hole to center of ball hole: 8-1/4" Measurement from center of long hitch pin hole to center of ball hole: 9-5/8"
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 10" drop and 11" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (2" and 2-5/16"). Fits 2" hitches.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 10" drop and 11" rise (adjustment pin included) Recommended for vehicles with greater than 24" from the ground to the top of the receiver opening when vehicle is level (includes many larger pickups) Allows towing of various trailers with the same ball mount 2 Zinc-plated steel hitch balls included 2-Sided platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals Locking pin set sold separately Made in the USA Specs: Fits: 2" x 2" trailer hitch receivers Also compatible with 2-1/2" x 2-1/2" hitch receivers when using 2-1/2" to 2" adapter sleeve (sold separately) Ball diameters: 2" and 2-5/16" Towing capacity 8,000 lbs GTW with 2" hitch ball 10,000 lbs GTW and 1,500 lbs TW with 2-5/16" hitch ball Maximum rise: 11" Maximum drop: 10" In the drop position, ball mount only adjusts from 4" - 10" Measurement from center of hitch pin hole to center of ball hole: 8-1/4" 1-Year limited warranty
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 4" drop and 4" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (2" and 2-5/16"). Fits 2" hitches.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 4" drop and 4" rise (adjustment pin included) Recommended for vehicles with 20" or less from the ground to the top of the receiver opening when vehicle is level (includes many light-duty trucks and SUVs) Allows towing of various trailers with the same ball mount 2 Hitch pin holes allow for further adjustment 2 Zinc-plated steel hitch balls included 2-Sided platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals Locking pin set sold separately Made in the USA Specs: Fits: 2" x 2" trailer hitch receivers Also compatible with 2-1/2" x 2-1/2" hitch receivers when using 2-1/2" to 2" adapter sleeve (sold separately) Ball diameters: 2" and 2-5/16" Towing capacity: 8,000 lbs GTW with 2" hitch ball 10,000 lbs GTW and 1,500 lbs TW with 2-5/16" hitch ball Maximum rise: 4" Maximum drop: 4" Measurement from center of short hitch pin hole to center of ball hole: 8-1/4" Measurement from center of long hitch pin hole to center of ball hole: 9-3/4" 1-Year limited warranty
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 3-1/2" drop and 4-1/2" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (2" and 2-5/16"). Fits 2" hitches.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 3-1/2" drop and 4-1/2" rise (locking adjustment pin included) Recommended for vehicles with 20" or less from the ground to the top of the receiver opening when vehicle is level (includes many light-duty trucks and SUVs) Allows towing of various trailers with the same ball mount 2 Hitch pin holes allow for further adjustment 2 Zinc-plated steel hitch balls included 2-Sided platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals Locking pin set deters theft Hitch receiver lock secures ball mount shank to hitch receiver Locking adjustment pin secures ball housing to shank 2 Keys (included) are keyed alike Made in the USA 1-Year limited warranty Specs: Fits: 2" x 2" trailer hitch receivers Ball diameters: 2" and 2-5/16" Towing capacity 8,000 lbs GTW with 2" hitch ball 10,000 lbs GTW and 1,500 lbs TW with 2-5/16" hitch ball Maximum rise: 4-1/2" Maximum drop: 3-1/2" Measurement from center of short hitch pin hole to center of ball hole: 8-1/4" Measurement from center of long hitch pin hole to center of ball hole: 9-5/8"
Tow up to 8,000 lbs with supreme safety and the convenience of an adjustable 10" drop and 11" rise with the Rapid Hitch ball mount system. Includes greaseless aluminum ball combo (2" and 2-5/16"). Fits 2" hitches.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 10" drop and 11" rise (locking adjustment pin included) Recommended for vehicles with greater than 24" from the ground to the top of the receiver opening when vehicle is level (includes many larger pickups) Allows towing of various trailers with the same ball mount 2 Greaseless Alumiball hitch balls included 2-Sided platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals Greaseless nylon cap allows for easy rotation between ball and coupler when towing Locking pin set deters theft Hitch receiver lock secures ball mount shank to hitch receiver Locking adjustment pin secures ball housing to shank 2 Keys (included) are keyed alike Made in the USA 1-Year limited warranty Specs: Fits: 2" x 2" trailer hitch receivers Ball diameters: 2" and 2-5/16" Towing capacity 6,000 lbs with 2" hitch ball 8,000 lbs with 2-5/16" hitch ball Maximum rise: 11" Maximum drop: 10" In the drop postion, ball mount only adjusts from 4" - 10" Measurement from center of hitch pin hole to center of ball hole: 8-1/4" The greaseless AlumiBall is a solid aluminum hitch ball topped with a nylon cap.
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 4" drop and 4" rise with the Rapid Hitch ball mount system. Includes greaseless aluminum ball combo (2" and 2-5/16"). Fits 2" hitches.Features: Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers Strong, lightweight, looks great and will not rust Ball mount adjusts in 1" increments up to 4" drop and 4" rise (pin and clip included) Recommended for vehicles with 20" or less from the ground to the top of the receiver opening when vehicle is level (includes many light-duty trucks and SUVs) Allows towing of various trailers with the same ball mount 2 Hitch pin holes allow for further adjustment 2 Greaseless Alumiball hitch balls included 2-Sided platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability Additional ball sizes can be purchased to replace the originals Greaseless nylon cap allows for easy rotation between ball and coupler when towing Made in the USA Specs: Fits: 2" x 2" trailer hitch receivers Also compatible with 2-1/2" x 2-1/2" hitch receivers when using 2-1/2" to 2" adapter sleeve (sold separately) Ball diameters: 2" and 2-5/16" Towing capacity: 8,000 lbs GTW with 2" hitch ball 10,000 lbs GTW and 1,500 lbs TW with 2-5/16" hitch ball Maximum rise: 4" Maximum drop: 4" Measurement from center of short hitch pin hole to center of ball hole: 8-1/4" Measurement from center of long hitch pin hole to center of ball hole: 9-5/8" 1-Year limited warranty The greaseless AlumiBall is a solid aluminum hitch ball topped with a nylon cap.
Interlocking blocks stack to different heights and can be positioned beneath jacks, stabilizers or RV wheels to add just enough lift to level your rig.Features: Stackable blocks provide extra lift to level your trailer or motor home Position beneath jacks, stabilizers or trailer wheels Interlocking design guarantees no shifting or collapsing once stacked Stack straight up for extra height Stagger blocks to create a ramp so you can easily drive up Durable plastic construction Storage case with integrated carrying handle included Specs: Quantity: 10 blocks Individual block dimensions: 8-1/4" wide x 8-1/4" long x 7/8" tall Weight capacity: 30,000 lbs Lifetime warranty Note: The manufacturer does not recommend stacking more than 5 blocks high
Heavy-duty feet let you mount Thule crossbars on your vehicle with an extra tall or domed roof. They provide 8" of clearance above the rain gutters. Tool-free installation lets you clamp the feet onto your rain gutters.Features: 4 Rain gutter feet let you mount Thule crossbars to your vehicle with an extra tall or domed roof Combine with 2 Thule crossbars (sold separately) to create a complete roof rack Work with Thule AeroBlade, WingBar Evo, SquareBar Evo, and ProBar load bars Tool-free, clamp-on installation with included knobs and hardware Artificial rain gutter accessory (sold separately) lets you install feet on gutterless camper shells and caps One-Key System locks (sold separately) secure feet to your vehicle's roof Powder coated steel, aluminum, and composite materials are durable and corrosion resistant Specs: Maximum tower load capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Clearance above rain gutters: 8" Minimum crossbar spread: 24" Limited lifetime warranty
Heavy-duty feet let you mount Thule crossbars on your vehicle with an extra tall or domed roof. They provide 5" of clearance above the rain gutters. Tool-free installation lets you clamp the feet onto your rain gutters.Features: 4 Rain gutter feet let you mount Thule crossbars to your vehicle with an extra tall or domed roof Combine with 2 Thule crossbars (sold separately) to create a complete roof rack Work with Thule AeroBlade, WingBar Evo, SquareBar Evo, and ProBar load bars Tool-free, clamp-on installation with included knobs and hardware Artificial rain gutter accessory (sold separately) lets you install feet on gutterless camper shells and caps One-Key System locks (sold separately) secure feet to your vehicle's roof Powder coated steel, aluminum, and composite materials are durable and corrosion resistant Specs: Maximum tower load capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Clearance above rain gutters: 5" Minimum crossbar spread: 24" Limited lifetime warranty
Heavy-duty feet let you mount Thule crossbars on your vehicle with an extra tall or domed roof. They provide 11" of clearance above the rain gutters. Tool-free installation lets you clamp the feet onto your rain gutters.Features: 4 Rain gutter feet let you mount Thule crossbars to your vehicle with an extra tall or domed roof Combine with 2 Thule crossbars (sold separately) to create a complete roof rack Work with Thule AeroBlade, WingBar Evo, SquareBar Evo, and ProBar load bars Tool-free, clamp-on installation with included knobs and hardware Artificial rain gutter accessory (sold separately) lets you install feet on gutterless camper shells and caps One-Key System locks (sold separately) secure feet to your vehicle's roof Powder coated steel, aluminum, and composite materials are durable and corrosion resistant Specs: Maximum tower load capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Clearance above rain gutters: 11" Minimum crossbar spread: 24" Limited lifetime warranty
Lightweight, aluminum Rapid Hitch looks sharp and is ready to work hard. Adjusting height? Just pull the pin, set the height to match your trailer, and pop the pin back in. ...
Lightweight, aluminum Rapid Hitch looks sharp and is ready to work hard. Adjusting height? Just pull the pin, set the height to match your trailer, and pop the pin back in. ...
Greaseless AlumiBall keeps things smooth and mess-free. Adjusting height? Just pull the pin, set the height to match your trailer, and pop the pin back in. Need to switch trailers? Flip the combo ball, and you're good to go.
Greaseless AlumiBall keeps things smooth and mess-free. Adjusting height? Just pull the pin, set the height to match your trailer, and pop the pin back in. Need to switch trailers? Flip the combo ball, and you're good to go.
Filters
