Easy-to-weld, heavy-duty hinge features a grease zerk fitting that lets you easily grease the pin for smooth and long-lasting operation. This durable steel hinge replaces a damaged or rusted hinge on your trailer's ramp or access door.Features: Heavy-duty hinge replaces a damaged hinge on your trailer's ramp or access door Grease zerk fitting lets you easily grease the hinge pin for smooth operation Steel construction is heavy duty and long-lasting Raw finish makes the hinge easy to weld on Made in the USA Specs: Bracket dimensions: 4" long x 2-5/8" wide; x 1/4" thick Pin dimensions: 8-3/16" long x 1" diameter
Heavy-duty e-bike rack has a ramp that lets you load your bikes with no lifting required. It folds up for compact storage, and it has built-in handles and wheels for easy transport. Rack tilts with bikes loaded for cargo area access. Locks included.Tool-Free Installation The EasyFold XT installs quickly and easily with the AutoAttach system. Simply open the SnugTite hitch pin, slide the shank into your receiver, and close the pin so it slides through the pin hole and shank. Once installed, turn the knob to deploy an anti-rattle wedge in the shank.
This platform rack is perfect for carrying heavy electric bikes. It includes a telescoping loading ramp that lets you easily roll your bikes onto the rack. Tilts nearly 90 degrees with bikes loaded for superior cargo area access.Approved for use on Class B RVs Telescoping Ramp The Destination E includes a telescoping, aluminum ramp so you can easily roll your e-bikes on and off the rack - no heavy lifting required.
This 2-bike rack has an integrated ramp that lets you easily roll your heavy electric bikes up and onto the trays - no lifting required. When you're done simply remove the ramp and store it onboard. Tilts with bikes loaded for cargo area access.Features: Platform bike rack carries 2 e-bikes using your vehicle's hitch receiver Integrated ramp lets you easily roll heavy bikes onto the rack Stores behind bike trays when not in use - no storage issues or risk of loss Padded clamps with ratcheting straps hold bikes securely by the frame or seat post Sliding wheel straps let you carry bikes with different wheelbases Adjustable trays slide side-to-side for optimal bike spacing - no tools required Rear-mounted spring pin lets you tilt and fold the rack Tilts with bikes loaded to access cargo area Anti-rattle hitch pin reduces movement of rack in hitch receiver Same Key System (SKS) locks deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 2 bikes Weight capacity: 80 lbs per bike Off-road rated: 48 lbs per bike RV rated: 80 lbs per bike Maximum tire width: 5" Maximum wheelbase: 54" Wheel diameter: up to 29" Maximum ramp length: 51" Distance from center of hitch pin hole to: Farthest part of rack when folded up: 12" Farthest part of rack when folded down: 30-1/2" Closest part of rack when folded up: 6" Closest part of rack when folded down: 10-3/4" Carrier weight: 53.5 lbs Limited lifetime warranty
If you're tired of loose ramps slowing you down and throwing off your setup, RapidRamps help manage that chaos. Install them once and use them for just about anything you need to load.It is designed to handle the kind of loading most folks deal with all season long. Specs Dimensions And Quantity: Ramps: 2 ramps, 72" Index bars: 2 bars, 38" Latch locks: 2 locks Inside pin length (span): 1/2" Overall length: 4-1/8" Pin diameter: 1/4" Mounting hardware: all brackets and fasteners included Weight Capacity: Max load: 6,000 lbs per pair (3,000 lbs per ramp) Construction: Ramp mounts: black powder-coated steel with e-coat Ramp: silver aluminum Index bar: yellow zinc Locks: chrome-plated steel Warranty: 1-Year limited
You've got bikes that can go anywhere, now you need a rack that can, too. The Piston ION makes loading heavy e-bikes easy with an included ramp, and its wheel-mount design won't scratch your paint. Works on cars, trucks, RVs, and trailers.The lightweight aluminum ramp latches securely in place while you roll bikes up - then stows easily in your trunk or cargo area when not in use. Adjustable from 34" to 56" long, the ramp extends to flatten the loading angle, so rolling a heavy e-bike up feels steadier and more controlled.
Easily load and transport your scooter or dirt bike with this sturdy steel, hitch-mounted carrier. Included ramp can be positioned on either side of carrier for quick, simple loading. Convenient gas holder is great for trail riding.Features: Carrier holds 1 small motorcycle and gas can not exceeding 500 lbs Weight of the motorcycle or scooter must be evenly balanced on the load track Included ramp can be positioned on either side of carrier for loading or unloading Ramp mounts between bike and gas can carrier when not in use Front and rear cradles adjust with pull pins for a perfect fit Gas can carrier fits most jerry can styles at 10" by 16" - must be secured Hitch-mount design is easy to install, easy to remove Hitch pin and/or lock sold separately Steel frame has a black powder coat finish that resists corrosion Tie-down straps to secure bike to carrier sold separately Specs: Application: 2" x 2" trailer hitch receivers For use with vehicle or motor home Carrier weight capacity: 500 lbs Carrier length: 75.5" Width of track: Inside: 5" Outside: 7" Gas can carrier: 10" wide x 16" long Ramp length: 37-1/2" 90-Day limited warranty Note: Distance between ground and hitch must be 18" or less to allow enough ground clearance to load bike.
If you're tired of loose ramps slowing you down and throwing off your setup, RapidRamps help manage that chaos. Install them once and use them for just about anything you need to load.It is designed to handle the kind of loading most folks deal with all season long. Specs Dimensions And Quantity: Ramps: 2 ramps, 60" Index bars: 2 bars, 38" Latch locks: 2 locks Inside pin length (span): 1/2" Overall length: 4-1/8" Pin diameter: 1/4" Mounting hardware: all brackets and fasteners included Weight Capacity: Max load: 6,000 lbs per pair (3,000 lbs per ramp) Construction: Ramp mounts: black powder-coated steel with e-coat Ramp: silver aluminum Index bar: yellow zinc Locks: chrome-plated steel Warranty: 1-Year limited
Tired of your skis or tires catching on your trailer lip? These plates smooth out the transition so loading's quick and hang-up free. The low-friction surface and traction knobs keep everything gliding steady and safe.Tie Down and Securement: ReTrax straps, Clamp Pro, and TrailBlazer tie-downs secure ramps, skis, and your ATV/UTV during transport. This product fills one piece of your loading system, helping every surface work together.
If you're tired of loose ramps slowing you down and throwing off your setup, RapidRamps help manage that chaos. Install them once and use them for just about anything you need to load.It is designed to handle the kind of loading most folks deal with all season long. Specs Dimensions And Quantity: Ramps: 2 ramps, 72" Index bars: 2 bars, 28" Latch locks: 2 locks Inside pin length (span): 1/2" Overall length: 4-1/8" Pin diameter: 1/4" Mounting hardware: all brackets and fasteners included Weight Capacity: Max load: 6,000 lbs per pair (3,000 lbs per ramp) Construction: Ramp mounts: black powder-coated steel with e-coat Ramp: silver aluminum Index bar: yellow zinc Locks: chrome-plated steel Warranty: 1-Year limited
If you're tired of loose ramps slowing you down and throwing off your setup, RapidRamps help manage that chaos. Install them once and use them for just about anything you need to load.It is designed to handle the kind of loading most folks deal with all season long. Specs Dimensions And Quantity: Ramps: 2 ramps, 60" Index bars: 2 bars, 28" Latch locks: 2 locks Inside pin length (span): 1/2" Overall length: 4-1/8" Pin diameter: 1/4" Mounting hardware: all brackets and fasteners included Weight Capacity: Max load: 6,000 lbs per pair (3,000 lbs per ramp) Construction: Ramp mounts: black powder-coated steel with e-coat Ramp: silver aluminum Index bar: yellow zinc Locks: chrome-plated steel Warranty: 1-Year limited
Premium rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Built-in LEDs use your vehicle's 4-way plug to sync with your brake lights.A stainless steel hitch lock is also included to secure the rack to your vehicle. Available Accessories An aluminum ramp (sold separately) lets you roll your heavy e-bikes on and off the rack - no heavy lifting required. The ramp telescopes to ensure it touches the ground so you don't have to lift your bike at all.
Easily load and transport your scooter or dirt bike with this sturdy steel, hitch-mounted carrier. Included ramp can be positioned on either side of carrier for quick, simple loading.Features: Carrier holds 1 small motorcycle not exceeding 500 lbs Perfect for dirt bikes and scooters Weight of the motorcycle or scooter must be evenly balanced for proper function of the carrier Included ramp can be positioned on either side of carrier for simple loading and unloading Special bracket holds ramp in place on end of carrier during transit Front and rear cradles adjust with pull pins for a perfect fit Hitch-mount design is easy to install, easy to remove Pin and clip included - hitch lock sold separately Sturdy, reliable steel construction Black powder coat resists corrosion Tie-down straps to secure bike to carrier sold separately Specs: Application: 2" x 2" trailer hitch receivers For use with vehicle or motor home Carrier weight capacity: 500 lbs Carrier length: 77" Width of track: Inside: 5" Outside: 7" Ramp length: 37-1/2" Distance from center of hitch pin hole to closest edge of carrier: 15-1/2" Distance from center of hitch pin hole to furthest edge of the carrier: 31-1/2" Distance from center of hitch pin hole to center of carrier rail: 19" 1-Year warranty Note: Distance between ground and hitch must be 18" or less to allow enough ground clearance to load bike.
This durable 3-piece steel hinge replaces a damaged or rusted hinge on your trailer's ramp or access door. Easy-to-weld, heavy-duty hinge features a grease zerk fitting that lets you easily grease the pin for smooth and long-lasting operation.Features: Heavy-duty 3-piece hinge replaces a damaged hinge on your trailer's ramp or access door Grease zerk fitting lets you easily grease the hinge pin for smooth operation Steel construction is heavy duty and long-lasting Raw finish makes the hinge easy to weld on Specs: Roller hinge dimensions: Length: 9" Diameter: 1"
Your e-bike matters, how you carry it should matter too. This rack holds your bike by the wheels, so you're not scuffing paint every time you load up. And it tilts, so you can grab snacks or gear from the trunk without taking your bike off.The Crosstrack Ramp (HLY39RR - sold separately) lets you roll your ride into place and hit the road. When you're hauling your bike, staying visible matters.
Replace the secondary pull pin for your Yakima Two Timer (Y02468), Four Timer (Y02469), OnRamp (8002706 or 8002707), or OnRamp LX (8002756 or 8002757) bike rack. Pull this gray pin on the stinger of the rack to engage the tilt mechanism on your rack.
Carry 2 e-bikes or bikes with fenders on the back of your vehicle or RV with this heavy-duty, V-shaped rack. Included ramp lets you load heavy e-bikes with ease. Platform slides out for access to your rear cargo area.Features: V-shaped bike rack carries 2 e-bikes using your vehicle's hitch receiver TwinTube platform slides out for access to your cargo area or for storage Rack arms can also be removed if extra space is needed Integrated ramp lets you easily roll heavy bikes onto the rack Wheel trays provide extra support for heavy bikes Cushioned cradles hold your bikes securely by the wheels Reduce bike-to-bike contact and help prevent scratches and scuffs Pull pin allows rack to fold for storage Shank rise provides 4" of ground clearance for Sprinter RV and other low-clearance vehicles Anti-rattle hitch pin reduces movement of rack in hitch receiver - 2 pins included Keyed-alike hitch and cable locks deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 2 bikes Weight capacity: 80 lbs per bike Wheel tray and ramp length: 57" Maximum tire width: 4-1/2" Maximum wheelbase: 54" Minimum tire size: 22" Maximum fat bike rim width: 114-mm Strap dimensions: 15-3/4" long x 1" wide x 5/8" thick Shank rise: 4" Distance between center of hitch pin hole to: Closest part of rack when folded down: 5" Furthest part of rack when folded down: 39-3/8" Weight: 85 lbs Limited 1-year warranty
Carry two bikes, including heavier e-bikes, behind your RV with a rack that's rated for the extra bounce. Holds up to 80 lbs per bike (70 lbs in RV mode), fits fat tires, tilts for hatch access, locks up, and works with an optional ramp.Lock It Up and Stop Thinking About It: Locking ratchet hooks and hitch pin help secure your bikes and the rack. Load and Unload Without the Deadlift: Add the optional Ramp and Bridge (S32YR - sold separately) to roll bikes into the trays.
This 2-bike rack with tail lights is perfect for carrying bikes of nearly any style, including heavy electric bikes with fenders. Integrated wheels let you roll the rack, so you don't have to carry it to your vehicle. Tilts with bikes loaded.Tool-Free Installation The rack quickly installs in your hitch receiver, without the need for tools. Open the SnugTite hitch pin, slide the shank into your receiver, close the pin so it slides through the pin hole and shank, then crank the lever until snug. Rotating the lever deploys an anti-rattle wedge in the shank to help take play out of the hitch connection.
This durable bent steel hinge replaces a damaged or rusted hinge on your trailer's ramp or access door. Easy-to-weld, heavy-duty hinge features a grease zerk fitting that lets you easily grease the pin for smooth and long-lasting operation.Features: Heavy-duty bent hinge replaces a damaged hinge on your trailer's ramp or access door Grease zerk fitting lets you easily grease the hinge pin for smooth operation Steel construction is heavy duty and long-lasting Raw finish makes the hinge easy to weld on Specs: Roller hinge dimensions: Length: 10" Diameter: 3/4"
This platform rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Bikes can be loaded onto the wheel trays front to back to prevent handlebar contact.A stainless steel hitch lock is also included to secure the rack to your vehicle. Available Accessories An aluminum ramp (sold separately) lets you roll your heavy e-bikes on and off the rack - no heavy lifting required. The ramp telescopes to ensure it touches the ground so you don't have to lift your bike at all.
Tired of your skis or tires catching on your trailer lip? These plates smooth out the transition so loading's quick and hang-up free. The low-friction surface and traction knobs keep everything gliding steady and safe.Tie Down and Securement: ReTrax straps, Clamp Pro, and TrailBlazer tie-downs secure ramps, skis, and your ATV/UTV during transport. This product fills one piece of your loading system, helping every surface work together.
Aluminum, extra-wide, basket-style cargo carrier is rustproof and weighs just 62 lbs. Raised sides rails help keep cargo in place. Included 47" long ramp pivots down for easy loading of wheeled items. 2" Receiver hitch required.Features: Hitch-mounted, basket-style cargo carrier with ramp and extra-wide deck lets you carry gear and wheeled equipment Keep wet and muddy items from dirtying up the interior of your vehicle Anti-skid surface prevents slipping even when wet Attached ramp makes it easy to load a wheelchair, mobility scooter, mower, snowblower and more Pivots up for travel and secures with pin and clip on both sides Lays flat in carrier when not in use Open-floor design offers stability for large items and prevents grime buildup Raised side rails help keep cargo in place Use 4-corner eye-bolts with straps/hooks (sold separately) to secure cargo Lightweight, rustproof extruded aluminum detracts less from hitch's tongue weight capacity than steel carriers Built-in reflectors add visibility for increased safety Assembly with basic hand tools required (not included) Hitch pin and clip included Specs: Application: 2" x 2" trailer hitch receivers Weight capacity: 400 lbs Interior carrier dimensions: 50" long x 30-1/4" wide x 4" deep Overall carrier dimensions: 51" long x 33" wide x 6" tall Ramp: 47" long by 30" wide Cross member width: 4" Measurement between slats: 1-1/2" Hitch pin hole diameter: 5/8" Maximum speed: 65 mph Weight: 62 lbs 90-Day limited warranty
Hauling heavier bikes doesn't have to be a struggle. This rack makes it easy with a built-in ramp, solid anti-wobble setup, and space for 2 bikes. It's a smooth, no-fuss way to load up and head out without dealing with awkward lifting.Features: Hitch-mounted bike rack carries up to 2 bikes with support for eBikes, road bikes, and mountain bikes Telescoping ramp design allows easy loading and unloading without heavy lifting Tool-free anti-wobble system provides a secure and stable connection to the vehicle Integrated locking system includes ratcheting straps, locking bike holders, and locking hitch pin for added security Tilt and fold functionality allows rear vehicle access with bikes loaded and compact storage when not in use Fender-compatible design supports bikes with fenders Integrated wheels make it easier to move and handle the rack off the vehicle RV-approved design suitable for Class A, B, and C motorhomes Specs: Bike capacity: 2 bikes Maximum bike weight: 70 lbs each Total weight capacity: 140 lbs Receiver size: 1-1/4" and 2" Wheel size compatibility: 20" to 32" x 4" Maximum wheelbase: 50" Maximum tire width: 4" Rack weight: 53 lbs
Filters
