Tired of cranking your stabilizers by hand? This double leg stabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Features: Stabilizer kit provides support to help steady your RV during setup and use Power drill operation allows quickstabilization using a non-impact drill 3/4" Drill adapter is included Triangular design enhances strength and stability for improved support Time-saving function allows faster setup compared to standard manual stabilizers Manual operation capability provides backup use if a drill is not available Manual crank sold separately (LC285324) Adjustable legs allow you to set the proper height and angle for optimal stabilization Safety guidance recommends positioning telescoping leg as close to vertical as possible for maximum stability Specs: Configuration: double leg kit Weight capacity: 500 lbs per leg Item weight: 18.9 lbs 1-Year warranty
Tired of cranking your stabilizers by hand? This single leg stabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Features: Stabilizer kit provides support to help steady your RV during setup and use Power drill operation allows quickstabilization using a non-impact drill 3/4" Drill adapter is included Triangular design enhances strength and stability for improved support Time-saving function allows faster setup compared to standard manual stabilizers Manual operation capability provides backup use if a drill is not available Manual crank sold separately (LC285324) Adjustable legs allow you to set the proper height and angle for optimal stabilization Safety guidance recommends positioning telescoping leg as close to vertical as possible for maximum stability Specs: Configuration: single leg kit Weight capacity: 500 lbs 1-Year warranty
If your setup feels a little shaky, this center brace helps tighten things up by linking your stabilizer legs together. It's a simple way to add extra support on smaller or narrower units and cut down on unwanted movement.Features: Center brace designed to connect stabilizer legs for added support and stabilityStabilization function links 2 legs together to reduce movement on smaller or narrower units Compatibility works with quickdropstabilizer setups using a short crossmember design Compact design fits tighter spaces without interfering with surrounding components Specs: Overall dimensions: 16-13/16" long x 3-7/8" wide x 2-13/16" tall Weight: 3.6 lbs 1-Year warranty
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. Black powder coat finish resists corrosion. ... Features: Stabilizing jacks help keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jacks up for travel, down for use Drop legs extend so you can adjust the height Spring-loaded levers release drop legs for use Steel handle lets you easily fine-tune height adjustment Large foot on each jack provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Installation hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Drop leg travel: 6-1/2" Lift capacity per jack: 650 lbs Maximum load the jack can lift Support capacity per jack: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 2 jacks 1-Year warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Drop-leg jack stabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the drop leg, and pin in place. ... Features: Drop-leg stabilizing jack helps keep your lightweight trailer or camper level and steady Great for loading and unloading cargo or for camping Telescoping drop leg lets you adjust the height Once welded to the trailer, pull the pin to lower the drop leg and reinsert it to keep the leg in place Round footplate provides stability Sturdy steel construction Weld-on installation Specs: Height: 20" from bottom of footplate to top of jack Travel: 18" 1-3/16" From center of hole to center of hole Drop leg width: 1-1/4" Mounting bracket dimensions: 8" long x 1-1/2" wide Footplate diameter: 5-1/4" Lift capacity: 2,000 lbs 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. Black powder coat finish resists corrosion. ... Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack. This stabilizer jack is handy for leveling or stabilizing lightweight trailers. Support the front of your cargo trailer so you can load it or unload it without the trailer rocking or tipping.
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Specs: Length: 24" 12 Month warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Universal design fits either side of your trailer Stabilizers aren't designated as left-hand (driver's-side) or right-hand (passenger's-side) Specs: Length: 30" 12 Month warranty
Load-bearing stabilizers are strong enough to lift your trailer up to 6" while keeping a max bracket height of 25" - perfect for changing a tire. ... There is a marking on the inner tube of this jack to help you identify the maximum lift of 25". Beyond that height, the stabilizer does not have a weight capacity rating. Always be sure to raise the jacks equally to avoid bending or twisting your camper's frame, or putting uneven weight on any one the stabilizer legs.
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Specs: Length: 33" Weight capacity: 1,929 lbs when installed in 90-degree positions 12 Month warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper or trailer Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Zinc finish provides corrosion resistance Specs: Length: 30" Weight capacity: 1,929 lbs when installed in 90-degree positions 12 Month warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Zinc finish provides corrosion resistance Specs: Length: 24" Weight capacity: 1,929 lbs when installed in 90-degree positions 12 Month warranty
Topwind A-frame jack offers powered capability with built-in drive nut. Use your drill and socket to quickly raise and lower jack, or operate it manually. 14" Travel makes this jack ideal for multiple agricultural and commercial applications.Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift.
Replaces (1) 3/32" x 1" roll pin for your Lippert Components stabilizer jack.Features: Replaces (1) 3/32" x 1" roll pin for your Lippert Components stabilizer jack Quantity: 1 replacement roll pin
Clamp these spring-loaded pins around your landing gear so that you can quickly and easily adjust the drop legs. Heavy-duty steel is zinc plated for corrosion resistance. Works with square jacks up to 2-1/4" wide.Features: Spring-loaded quick pins make adjusting the drop legs on your landing gear a snap Pull pin to release, let go to engage Simple installation - clamps around jack leg No more losing pins Sturdy steel is zinc plated for durability and corrosion resistance Specs: Application: landing gear with up to 2-1/4" wide legs Pin diameter: 3/8" Quantity: 2 pins Lifetime warranty
Stabilizer system that connects to the RV's bike rack mount to reduce trailer sway and unwanted movement without drilling. Ratchet strap design provides quick setup and solid side-to-side support.Features: Provides exceptional stability by reducing unwanted trailer movement No drilling or permanent installation required Attaches directly to the RV's rear bike rack frame Ratchet strap design applies inward pressure for enhanced side-to-side stabilityQuick setup and removal process for campsite efficiency Compact system allows use with bike racks without removing mounted gear Durable metal construction suited for repeated use and outdoor conditions Compatibility: Most 2" shanks
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Simply position the tripod beneath your trailer's king pin and release the chain that holds the stabilizer hitch cup in place. The hitch cup will rise and surround the king pin. Reattach the chain by hooking a bottom link around the bracket on the tripod leg.
Folding RV stabilizer helps reduce bouncing and swaying in your parked trailer or RV when you enter or exit. Easily sets up with no tools. Adjusts to fit trailers with 14" to 28" of frame-to-ground clearance.Features: Stabilizer helps reduce bouncing and swaying in your parked RV or trailer Quick and easy setup requires no tools Tighten strap to pull legs in for increased height Loosen strap to spread legs out for less height Durable nylon strap with steel buckle has a 1,000-lb ratchet strength Folds up for compact, convenient storage Storage bag is included Lightweight aluminum construction Corrosion-resistant anodized silver power coat finish Specs: Application: trailers and RVs with 14" - 28" of clearance between the frame and the ground Individual leg length: 27" 1-Year warranty
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Features: Power stabilizer jacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 78" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
It's never been easier to raise, level and stabilize your travel or 5th-wheel trailer. This electric stabilizer spans the width of your rig for maximum support and has dual, 12V motors that function independently for quick, simple leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Stabilizes with wide side support brackets For use on rear frame of pulled travel trailer Not recommended for use on front of motorized vehicle Dual, 12V motors operate independently of one another for simple, effective leveling Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Switches and emergency hand crank included Switch harness has 10-gauge wires Sturdy steel construction Specs: Application: trailers and RVs with frames from 42" to 77" wide Requires 24" of space on the frame of your trailer or RV Lift: 22" Weight capacity: 6,000 lbs 3-Year warranty
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when drop leg is released Drop leg helps bridge the gap to the ground Works as a powered jack when used with an 18V or 24V, cordless, non-impact drill (not included) Included drill adapter attaches to jack in place of handle and eliminates need to manually crank Resists rust and corrosion, even in areas with salt Wrinkled black powder coat finish has a 700-hour salt spray rating Zinc-nickel inner and outer tubes Won't shake, rattle, or overheat during operation Durable, precision-machined tubing limits rattle Composite gears dissipate heat Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Can be used as manual jack with included, sidewind handle Offers a comfortable rubber grip Easily removes for storage so you can use the drill adapter Lasts for years thanks to durable steel construction Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around the trailer frame Includes mounting hardware Specs: Application: trailer frames up to 6" tall x 6" wide Installation requires 5" of clearance along the trailer frame Lift capacity: Manual: 1,800 lbs With drill: 900 Support capacity: 7,000 lbs Bracket height (from center of top bracket hole to the ground): Retracted: 13-5/8" Extended: 40-15/16" Total lift: 26-5/8" Screw travel : 13-5/8" Drop leg travel : 13" Adjustment hole spacing on drop leg: 3-7/16" from center of hole to center of hole Clearance: 16-1/2" from mounting bracket to top of jack Inner tube dimensions: 2" x 2" Outer tube dimensions: 2-1/4" x 2-1/4" Gear ratio: 3:4 1-Year limited warranty Drill Powered Operation When you're hitching up before a long day of work, or putting away your trailer before turning in for the night, you want to be able to do it with as little effort as possible.
... Best for severe-duty tractor trailers, agricultural, and construction uses. Measures 13" when retracted. Drop leg adds an extra 11-1/2".Features: Companion jack works with your etrailer or Ram 2-speed jack (TJD2SP-25100 - sold separately) to raise and lower your gooseneck trailer Ideal for heavy-duty agricultural, construction and industrial trailer uses Hands-free spring return lets you retract the leg using your foot Drop leg with spring-loaded plunger pin increases overall extension for maximum adjustability Faster and easier to align than a pin and clip Round footplate minimizes sinking in soft ground Strong, stable, and durable industrial-sized steel frame Black painted inner and outer tubes Easy maintenance Built-in grease zerks make routine maintenance easy Weld on installation Sidewind handle, cross shaft, and gearbox are sold separately Specs: Lift capacity: 25,000 lbs Total travel: 24-1/2" Screw travel : 13" Drop leg travel : 11-1/2" Overall height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Outer tube length: 25" Outer tube width: 4-3/8" Inner tube width: 4" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" on center Rod shaft diameter: 1" Footplate diameter: 9-7/8" 1-Year warranty
... Sound familiar? Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.Highlights Drill-Powered Stabilizer: No cranking or wiring. Just grab your drill and you're done. Works With Most Cordless Drills: No need to upgrade. 18V to 24V non-impact models get the job done.
... Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Filters
