Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems Connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Color-coded wires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Installation To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion. Powered Tail Light Converter with Surface-Mount Technology A tail light converter is built into this T-connector.
Navigate the waters in low visibility with this 18" tall x 3/4" diameter waterproof LED polelight. Light has a 360 degree output that can be seen for up to 2 nautical miles. Hinge allows pole to tilt as needed.Features: 360-Degree LED polelight makes your boat more visible when traveling at night Hinged design lets you easily tilt and adjust the light Sealed, waterproof unit includes durable polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant 12V DC compatible Surface-mount installation Hardwires to your application Meets or exceeds ABYC A-16, USCG 2NM, and C-5 regulations Specs: Dimensions: 18" long x 2-1/2" wide x 3/4" diameter Distance between mounting holes: 1-3/4" Range: 2 nautical miles Diodes: 1 Input voltage: 9V - 14V Power draw: 0.085 - 0.115 amps Wire length: 12" Limited lifetime warranty
Install a 4-way flat on your vehicle with this splice-in harness. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems. Requires wiring kit (C55152 - sold separately) to connect to battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire, and pulse-width modulation (PWM) systems Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Requires Curt powered converter wiring kit (C55152 - sold separately) to connect to your battery Color-coded wires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Powered Tail Light Converter with Surface-Mount Technology Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
Navigate the waters in low visibility with this 12" tall x 3/4" diameter waterproof LED polelight. Light has a 360 degree output that can be seen for up to 2 nautical miles. Hinge allows pole to tilt as needed.Features: 360-Degree LED polelight makes your boat more visible when traveling at night Hinged design lets you easily tilt and adjust the light Sealed, waterproof unit includes durable polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant 12V DC compatible Surface-mount installation Hardwires to your application Meets or exceeds ABYC A-16, USCG 2NM, and C-5 regulations Specs: Dimensions: 12" long x 2-1/2" wide x 3/4" diameter Distance between mounting holes: 1-3/4" Range: 2 nautical miles Diodes: 1 Input voltage: 9V - 14V Power draw: 0.085 - 0.115 amps Wire length: 18" Limited lifetime warranty
Navigate the waters in low visibility with this 14" tall x 3/4" diameter waterproof LED polelight. Light has a 360 degree output that can be seen for up to 2 nautical miles. Hinge allows pole to tilt as needed.Features: 360-Degree LED polelight makes your boat more visible when traveling at night Hinged design lets you easily tilt and adjust the light Sealed, waterproof unit includes durable polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant 12V DC compatible Surface-mount installation Hardwires to your application Meets or exceeds ABYC A-16, USCG 2NM, and C-5 regulations Specs: Dimensions: 14" long x 2-1/2" wide x 3/4" diameter Distance between mounting holes: 1-3/4" Range: 2 nautical miles Diodes: 1 Input voltage: 9V - 14V Power draw: 0.085 - 0.115 amps Wire length: 10" Limited lifetime warranty
Navigate the waters in low visibility with this 30" tall x 3/4" diameter waterproof LED polelight. Light has a 360 degree output that can be seen for up to 2 nautical miles. Hinge allows pole to tilt as needed.Features: 360-Degree LED polelight makes your boat more visible when traveling at night Hinged design lets you easily tilt and adjust the light Sealed, waterproof unit includes durable polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant 12V DC compatible Surface-mount installation Hardwires to your application Meets or exceeds ABYC A-16, USCG 2NM, and C-5 regulations Specs: Dimensions: 30" long x 2-1/2" wide x 3/4" diameter Distance between mounting holes: 1-3/4" Range: 2 nautical miles Diodes: 1 Input voltage: 9V - 14V Power draw: 0.085 - 0.115 amps Wire length: 12" Limited lifetime warranty
Navigate the waters in low visibility with this 42" tall x 3/4" diameter waterproof LED polelight. Light has a 360 degree output that can be seen for up to 2 nautical miles. Hinge allows pole to tilt as needed.Features: 360-Degree LED polelight makes your boat more visible when traveling at night Hinged design lets you easily tilt and adjust the light Sealed, waterproof unit includes durable polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant 12V DC compatible Surface-mount installation Hardwires to your application Meets or exceeds ABYC A-16, USCG 2NM, and C-5 regulations Specs: Dimensions: 42" long x 2-1/2" wide x 3/4" diameter Distance between mounting holes: 1-3/4" Range: 2 nautical miles Diodes: 1 Input voltage: 9V - 14V Power draw: 0.085 - 0.115 amps Wire length: 12" Limited lifetime warranty
Navigate the waters in low visibility with this 24" tall x 3/4" diameter waterproof LED polelight. Light has a 360 degree output that can be seen for up to 2 nautical miles. Hinge allows pole to tilt as needed.Features: 360-Degree LED polelight makes your boat more visible when traveling at night Hinged design lets you easily tilt and adjust the light Sealed, waterproof unit includes durable polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant 12V DC compatible Surface-mount installation Hardwires to your application Meets or exceeds ABYC A-16, USCG 2NM, and C-5 regulations Specs: Dimensions: 24" long x 2-1/2" wide x 3/4" diameter Distance between mounting holes: 1-3/4" Range: 2 nautical miles Diodes: 1 Input voltage: 9V - 14V Power draw: 0.085 - 0.115 amps Wire length: 18" Limited lifetime warranty
Backing up in the dark shouldnt feel like guesswork. This reverse light throws white light through a tinted lens that looks sharp during the day and bright at night. It snaps into a standard 6" oval grommet, seals out water and road grime.Simple Tri-Pole Hookup: Works with TecNiq T99 harnesses (TN47PV, sold separately) for a clean, reliable connection. Built to Handle Weather and Vibration: TecSeal urethane potting protects internal circuits from moisture and harsh use.
Navigate the waters in low visibility with this 36" tall x 3/4" diameter waterproof LED polelight. Light has a 360 degree output that can be seen for up to 2 nautical miles. Hinge allows pole to tilt as needed.Features: 360-Degree LED polelight makes your boat more visible when traveling at night Hinged design lets you easily tilt and adjust the light Sealed, waterproof unit includes durable polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant 12V DC compatible Surface-mount installation Hardwires to your application Meets or exceeds ABYC A-16, USCG 2NM, and C-5 regulations Specs: Dimensions: 36" long x 2-1/2" wide x 3/4" diameter Distance between mounting holes: 1-3/4" Range: 2 nautical miles Diodes: 1 Input voltage: 9V - 14V Power draw: 0.085 - 0.115 amps Wire length: 18" Limited lifetime warranty
... No time to rewire. You grab the adapter, snap it into place, and the lights fire up. Quick fix, solid connection, and you're back on schedule.Specs Adapter Type: Converts: 7-way blade (vehicle) to 4-way or 5-way flat (trailer) Functionality: Supports: taillights, brake lights, turn signals, reverse lights (5th pin) Construction: Material: Plastic housing Weather resistance: Sealed design helps block dirt and moisture Warranty: 1-Year limited
You're hooking up at dusk and want a quick check. This adapter lights when your taillights come on and lets you plug from 7 Blade to 5 or 4 Flat with no rewiring.Highlights Two Connector Options: Converts 7 Blade to 5 or 4 Flat. Plug-In Setup: No rewiring required. LED Indicator: Lights when taillights are on. Core Signals: Brake, turn, taillight, reverse, and ground. Quick Hookups: Fast connection for mixed trailer plugs.
... Included pigtail harness hardwires into your vehicle and the connector end mates with the 7-pole socket to form a weathertight seal.Features: Dual connector lets you hook up to a trailer with either a 7-pole, RV-style plug or a 4-way flat plug Pigtail harness hardwires into your vehicle and connects to 7-way socket Includes color-coded 7-wire leads and 1/2" convoluted tubing Forms weathertight seal on back of socket to keep out moisture and prevent corrosion Rubber gasket provides excellent weather protection Integrated stainless steel spring lets you easily open and close socket covers High-impact ABS plastic construction is extra durable Sturdy steel mounting bracket installs on bumper with included screws Black epoxy coating resists rust Specs: Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year warranty Wiring Configuration Wire Color Circuit Wire Gauge Red Left turn and stop 14 Gauge White Ground 10 Gauge Blue Electric brakes 12 Gauge Green Right turn and stop 14 Gauge Black Battery 12 Gauge Brown Running lights 14 Gauge Yellow Reverse lights 14 Gauge
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts, mis-wire situations, and electrostatic discharge Splices into your vehicle's wiring with the included quick-splice connectors Color-coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket with protective dust cover Specs: Application: Vehicles with 2-wire or 3-wire electrical systems Trailers and vehicles with LED or incandescent lights 4-Way harness length: 58" Splice-in wire length: 17" Ground wire length: 17" Power wire length: 20' Maximum amperage: Turn lights and brake lights: 3 amps per circuit Tail lights: 3 amps per circuit Wire gauge: Power wire: 12 Limited 1-year warranty Do I Need A Tail Light Converter?
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts and mis-wire situations Splices into your vehicle's wiring with the included quick-splice connectors Color-coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket with protective dust cover Specs: Application: vehicles with 2-wire or 3-wire electrical systems 4-Way harness length: 60" Splice-in wire length: Brown, red, yellow: 18" Green: 36" Ground wire length: 18" Power wire length: 12' Maximum amperage: Turn lights and brake lights: 4.2 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Do I Need A Tail Light Converter?
Built to last, this tail light converter with a 76" 4-way flat harness is made using surface-mount technology. Designed for vehicles that have amber turn signals and incandescent bulbs. ... Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Designed with safety in mind Guards against electrical shorts and mis-wire situations Connects directly to your vehicle's wiring with the included quick-splice connectors Bonded wires are color coded to ease installation Resists shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes a durable, molded-rubber, female output socket with protective dust cover Specs: Application: vehicles with 3-wire electrical systems and incandescent tail lights 4-Way harness length: 76" Ground wire length: 16" Splice-in wire length: Brown, red, yellow: 16" Green: 60" Max amperage: Turn lights and brake lights: 3 amps per circuit Tail lights: 5 amps per circuit 1-Year limited warranty Do I Need a Tail Light Converter?
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts and mis-wire situations Splices into your vehicle's wiring with the included quick-splice connectors Color coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket and protective dust cover Specs: Application: vehicles with 2-wire, 3-wire, or pulse-width modulation (PWM) electrical systems 4-Way harness length: 60" Splice-in wire length: Brown, yellow, red: 18" Green: 72" Ground wire: 18" Power wire length: 20' Maximum amperage: Turn lights and brake lights: 5 amps per circuit Tail lights and running lights: 7.5 amps per circuit Limited 1-year warranty Do I Need A Tail Light Converter?
Quickly and easily convert a 6-pole, round pin connector to a 4-pole, flat connector with this RV connector adapter. Adapter has a non-corrosive nylon shell.Features: 6-Pole to 4-pole RV flat adapter Quick and easy conversion of 6-pole, round pin connector on your vehicle to the 4-pole flat connector on your trailer Connects Ground, Left Turn, Right Turn, Stop and Tail Light circuits Non-corrosive nylon shell and insert Specs: Application: Vehicles with 6-pole connectors 1-Year limited warranty This adapter will make the two trailer connectors pictured below work together. 6-Pole Connector Socket on vehicle 4-Way connector on trailer
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.Features: Incandescent trailer light kit comes with everything needed to properly light a trailer over 80" wide Includes 2 tail lights, 2 amber clearance lights, 2 reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware Sonically sealed, waterproof tail lights and clearance lights are submersible 2 Low-profile combination tail lights (ST16RB and ST17RB) Provide stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex functions Driver's-side light includes license illuminator 2 Amber clearance lights (MC91AB) Self-grounding chrome bases Gaskets for weathertight seal 2 Amber reflectors (RE11AB) meet FMVSS "A" for reflex when properly applied Durable polycarbonate housing on all lights Compatible with 12V DC systems Simple installation with included mounting bracket (LP5SB) and stainless steel mounting hardware Tail lights stud mount to trailer Clearance lights surface mount to trailer Reflectors screw-mount to trailer or attach with adhesive backing 25' Wiring harness with 4-pole connector DOT approved PC rated Specs: Application: trailers over 80" wide Tail light dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Distance between mounting holes (center on center): 2" Clearance light dimensions: 2-7/8" long x 1-1/2" wide x 1" thick Reflector dimensions: 4-7/16" long x 1-15/16" wide Distance between mounting holes (center on center): 3-15/16" Power draw at 12V: Tail lights: Stop/turn: 2.3 amps Tail: 0.9 amps Clearance lights: 0.2 amps Limited 3-year warranty Note: Over 80" Federal Regulations require additional clearance lights (like MC94RB, sold separately) Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Trailer kit with 2 stud mount tail lights; 2 stud mount amber clearance lights; license plate bracket; wire harness w/4-pole connectorStandard Trailer Light Kit with 25' Wire Harness This is a stud-mounted trailer light kit. The kit contains two stud-mount tail lights, two stud-mount, amber clearance marker lights, a corrosion-proof license plate bracket, and a 25' wire harness with a 4-pole trailer connector.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Waterproof housing and lens unit is submersible Great for marine trailer applications LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Universal mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL57RB Passenger side: STL56RB Light dimensions: 6-1/16" wide x 3-5/8" tall x 2-1/4" deep Number of diodes: Driver's side: 23 Passenger's side: 18 Power draw at 12.8 volts: Stop and turn lights: 0.268 amps Side marker lights: 0.059 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Sealed, waterproof construction is submersible Durable surface-mount diode (SMD) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Stud mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL39RB Passenger side: STL38RB Light dimensions: 5-1/16" long x 4-9/16" tall x 2-5/8" deep Light face: 4-9/16" x 4-9/16" Distance between mounting studs (center on center): 2" Diodes: Driver's side: 10 Passenger's side: 7 Power draw at 12.8 volts: Stop and turn lights: 0.259 amps Side marker lights: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Trailer kit with 2 stud-mount, submersible tail lights; corrosion-resistant license-plate bracket; 2 amber side marker and clearance lights; 25' wiring harness with 4-pole connector; mounting hardwareFeatures: Red, submersible, trailer light kit with stud mount lights, license bracket, amber clearance lights, wiring harness, mounting hardware 2 Red, stud-mount, submersible tail lights (ST6RB and ST7RB) Driver's-side light includes license illuminator Corrosion-resistant license-plate bracket 2 Amber, stud mount, square side marker and clearance lights (MC36AB) Self-grounding through mounting stud Lights include reflectorized lenses, eliminating the need for separate reflectors to meet DOT requirements 25' Wiring harness with 4-pole connector Mounting hardware included DOT approved Limited 3-year warranty - excludes bulbs Note: Lights included in this kit pull 2.5 amps for stop/turn function and 1 amp for tail signal.
Filters
