Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove the rear threshold, floor covers, and some interior paneling to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery.
Your lights are out and you don't know why. This smart 7-way plug connects to your factory USCAR socket, runs a 20-second light check, and shows faults in the app so you know what to fix before pulling out of the driveway.Run a Light Check Solo: 20-second automated light test starts as soon as you plug in the trailer. Secure, Weather-Resistant Design: Resin-encapsulated electronics and included cover protect against dust, water, and vibration.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove the floor covers, some internal paneling, and the tail light assemblies to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove the rear threshold, storage covers, and some interior paneling to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove the rear threshold, storage covers, and some interior paneling to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery.
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord allows you to power the jack directly from the 7-way on your tow vehicle. Extends 6" in 47.2 seconds with 1,000 lbs of tongue weight.Features: Electric jack lets you raise and lower your A-frame trailer quickly and easily Power Swap auxiliary cord allows you to power the jack directly from the 7-way on your tow vehicle Cord can be stored under jack cover when not in use Integrated storage ring keeps safety chains off the ground when not in use 3 LEDs illuminate the area for simple nighttime setup Helical-cut gears with angled teeth gradually mesh for quiet, efficient operation Crank-thru socket allows you to manually operate jack if needed Easy bolt-on installation - hardware included Heavy-gauge steel construction ensures durability and strength Black powder coat finish resists rust and corrosion Durable, textured housing prevents chips and cracks Specs: Bracket height: 10-3/4" Retracted 28-3/4" Extended Lift: 18" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 47.2 seconds Retracts 6" in 43.5 seconds Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Power consumption: 30 amps Lift capacity: 3,500 lbs 1-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove the rear threshold, trim panels, and some interior floor covering to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery. Connect the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove all trunk floor coverings, storage trays, and the scuff panel to access these connection points. Once you've plugged in the connector, run the red hot lead up to your car battery.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove the floor coverings and some interior paneling to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required.You will have to remove cargo trays, trim paneling, and interior covering to access this harness. Once installation is complete, the 4-way flat connector will be stowed in your rear cargo area. It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
This 7- and 4-pole connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system with Chrysler/Dodge OEM plug adapter and bracket.Features: 7- and 4-Pole trailer connector with mounting bracket Has high-impact, ABS plastic construction Stainless steel spring for easy cover operation Rubber gasket provides weather-resistant design Mounting bracket for easy, snap-in socket installation Black, epoxy-coated steel construction Specs: Application: Replaces factory 7-way connector on trucks and SUVs Can be used to add a connector to 2003 and newer Chrysler and Dodge pickups and SUVs Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year limited warranty
You switch between trailers and want less hassle. One connector at the vehicle keeps hookups quick so you can plug in and go without hunting for parts.Quick Hookups: Choose the plug you need without rewiring.
... Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. 7-way RV-style plug makes setup easy.Features: Electric jack lets you raise and lower your A-frame trailer Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location 2 Toggle switches on the front of the housing let you operate the jack On/off switch controls light Extend/retract switch controls up and down movement 7-way RV-style plug pulls power from your vehicle's trailer connector No need to manually wire for power 7-Way must have active 12 volt pin LED light illuminates at a downward angle to help you focus on your coupler Emergency crank (included) allows you to manually operate jack if needed Black powder coated outer tube Zinc-finished inner tube and footplate resist corrosion Simple, bolt-on installation Specs: Bracket height: Retracted: 9" Extended: 28-1/2" Total lift: 25-1/8" Screw travel: 19-1/2" Drop leg travel: 5-5/8" Clearance: 20-1/2" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Hole spacing on drop leg: 1-7/8" Footplate diameter: 5-1/2" Lift capacity: 3,500 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Designed to use with your Curt Echo In-Line brake controller for easier installation. One end of this no-splice wiring harness plugs into your vehicle's OEM socket. The other end plugs into your 7-way connector (sold separately).Features: Wiring extension provides 20" of extra length for easier positioning and installation of your Curt Echo In-Line brake controller Connects OEM USCAR socket to 7-way connector (not included) or the Echo In-Line harness Simple plug-and-play design eliminates the need for cutting or splicing Slit loom keeps wires contained and protected 1-Year limited warranty
... Tongue-and-groove lens seal. Recessed mount with included grommet and 3-wire plug.Features: Combination trailer tail light serves 3 functions when properly mounted Stop light Tail light Turn signal light Tongue-and-groove lens seals light to protect electrical connections against water and dust Premium bulb rated for up to 15,000 hours Wedge-base socket prevents premature bulb failure Durable polycarbonate housing Red lens over incandescent bulb Compatible with 12V DC systems Recessed mount with included grommet 3-Wire plug makes trailer connections DOT compliant Made in the USA Specs: Dimensions: 4-1/4" diameter x 2-1/16" thick Bulb type: incandescent 1-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
This socket plugs into T-connector to provide a 7-pole trailer connector in the truck bed for use with fifth wheels. Connector plugs into OEM wiring harness to allow for a 7-pole connector in the truck bed.Features: 7-Pole, sealed socket, RV-style trailer connector with T-connector Plugs into OEM harness - no splicing Provides quick and easy installation of RV socket in truck bed High-impact nylon construction Resists corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents intrusion of moisture when closed Has drain slot and angled design for drainage Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Application: Chevy, Dodge, GMC, Ford and Nissan trucks Current rating: 30 amps Volt rating: 12 volts Length: 7-1/2 feet Recommended hole cutout for connector in bed: 2-1/8" 1-Year limited warranty
Mount this 7-way, RV-style connector in your truck bed to simplify hookup of your 5th-wheel or gooseneck trailer. Harness plugs into existing wiring and retains use of factory 7-pole at the bumper. 90-Degree-angled connector fits into tight spaces.Installing a second 7-way connector in your truck bed makes it easy to connect the 7-way plug from your fifth-wheel or gooseneck trailer.
Establish a secure connection between your trailer and semi or other tow vehicle with this heavy-duty, 7-pole RV blade-style socket and mounting bracket.Features: Heavy-duty, 7-pole, RV blade-style socket connects tow vehicle to trailer Zinc, die-cast housing for durability Maximum amperage: 35 Includes mounting bracket and hardware 12-704 Pollak RV 7-Blade Plug End Socket with Bracket
On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.Features: Diffused strobe or DOT lamp in a 6" oval form factor Grommet-mount design with dual AMP connector Meets or exceeds FMVSS 108; Amber strobe meets SAE J595 IP68 rated for dust and water incursion Sonically welded housing for a 100% sealed light Comes with lifetime warranty Wire colors: White - Ground, Red - High/Turn, Black - Low/Dim Specs: Dimensions (grommet mount): 6-1/2" L x 2-1/4" W x 1-1/2" D LED count: 32 Voltage: 9-14 VDC Current - Amber strobe's reverse: 0.575 A (± 0.085 A) Current - Amber strobe: 0.280 A Current - Stop/Turn: 0.170 A (± 0.030 A) Current - Tail: 0.075 A (± 0.012 A) Current - Reverse: 0.575 A (± 0.085 A) Plug: Dual AMP Mounting: Grommet LED color: Amber Lens color: Clear only This all new light from TecNiq combines all the features of a traditional stop, tail, turn, and reverse lamp, with the new styling of a diffused top and bottom lensing.
You're backing up to a trailer with a different 7-way plug. This adapter plugs in so you can hook up fast without cutting wires, and your brake, turn, and tail signals are ready when you pull out.Highlights 7 Blade to 7 Pin: Adapts 7 Blade to 7 Pin connectors. Plug-In Setup: No cutting or splicing required. Durable Housing: Impact and corrosion resistant. Full Signal Support: Brake, turn, taillight, electric brake, auxiliary, reverse, ground.
Trailer adapter converts a tow vehicle's 7-pole wiring connection to a 5-pin Delphi connection and a 2-pin camera connection for towing trailers with a backup camera. Coiled cord for extra flexibility. Threaded bracket for a secure connection.Features: Converts a tow vehicle's 7-pole wiring connection to a 5-pin Delphi trailer connection and a 2-pin camera connection for towing trailers with a backup camera Handle grip on 7-way plug for easy connection and disconnection Coiled cord stretches and contracts preventing unneeded stress on wires Threaded mounting bracket ensures secure connection to vehicle
Filters
