Product Experts Available Now!
Call 1-800-940-8924
Result: lift up brackets
Popular Categories
FiltersDutton-Lainson A-Frame Trailer Jack - Sidewind - 15" Lift - 1,000 lbs
In Stock
This 1,000-lb sidewind A-frame trailer jack provides 15" of lift for hitching and uncoupling lightweight trailers. It mounts to standard A-frame couplers with bolt-on or weld-on installation and features a corrosion-resistant TUFFPLATE finish.Features: 1,000-lb lift capacity supports lightweight utility, cargo, and recreational trailers 15" lift raises and lowers your trailer for easier hitching and uncoupling Fits standard A-frame couplers with bolt-on or weld-on installation Sidewind handle provides smooth manual operation with comfortable cranking clearance Zinc-plated yellow chromate TUFFPLATE finish resists corrosion for longer service life Optional removable foot (sold separately) provides additional ground support Made in the USA Specs: Lift capacity: 1,000 lbs Lift: 15" Maximum tongue height: 29-3/4" Height above mounting bracket: 15-1/4" Inner tube diameter: 1-3/4" Outer tube diameter: 2" Operation: sidewind manual crank Installation: bolt-on or weld-on Finish: zinc-plated yellow chromate TUFFPLATE Foot: optional, sold separately Warranty: 3-year limited How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
- Utility Trailer
- 0 - 1000 lbs
- Manual Jack
- Weld-On
- Bolt-On
- A-Frame Jacks
- No Wheel or Foot
- Sidewind Jack
- Dutton-Lainson
Replacement Chain Brackets for TorkLift SuperHitch Everest Weight Distribution System - Qty 2
Mount these brackets to your trailer frame so that you can secure the lift chains on your TorkLift SuperHitch Everest weight distribution system. Necessary hardware included.Features: Replacement brackets secure lift chains on your TorkLift SuperHitch weight distribution system Included hardware lets you either bolt or weld the brackets to your trailer frame Quantity: 2
- Weight Distribution Hitch
- Brackets
- Hardware
- TorkLift
Replacement Lift Bracket for Curt Weight Distribution Systems
In Stock
Replaces one of the lift brackets that came standard with your Curt weight distribution system. Bracket mounts to your trailer frame with the included hardware and provides an attachment point for your lift chain.Features: Replaces 1 lift bracket on your weight distribution system Works with Curt trunnion-bar and round-bar weight distribution systems Provides the attachment point for your lift chain Fits trailer frames up to 2-3/4" wide Resists rust with durable black powder coat finish Includes: 1 Lift bracket (1) 2" Long x 1/2" diameter bolt (1) 4" Long x 1/2" diameter bolt 1 Safety clip
- Weight Distribution Hitch
- Brackets
- Lift Brackets
- Frame Bracket
- CURT
Clamp-On Lift Brackets for Blue Ox SwayPro Weight Distribution Systems
In Stock
Clamp these lift brackets onto your trailer's tongue to get excellent clearance for items mounted above your trailer frame. Rotating design lets you quickly and easily lift the chains of your Blue Ox SwayPro weight-distribution system.Features: Clamp-on lift brackets are low-profile, allowing clearance for certain accessories mounted above the trailer frame Rotating latches make lifting chains quick and easy Included wrench provides leverage needed to rotate latches Designed for use with Blue Ox SwayPro weight-distribution systems 2 Latch brackets and installation hardware included Specs: Length of clamp-on bracket: 4" Width of clamp-on bracket: 2-1/2" Width of rotating portion: 6"
- Weight Distribution Hitch
- Brackets
- Lift Brackets
- Frame Bracket
- Blue Ox
Blue Ox Signature Series Lift Brackets for SwayPro Weight Distribution Systems - Clamp On or Bolt On
In Stock
Clamp or bolt these lift brackets onto your trailer frame to increase mounting options and provide clearance for items above your trailer frame. Rotating design lets you quickly lift the chains of your Blue Ox SwayPro weight distribution system.Features: Lift brackets increase versatility by attaching in 2 different ways Drilling through trailer frame and bolting Clamping onto your trailer frame for a no-drill option Multiple holes increase mounting options for various trailer frame heights Provide clearance for accessories mounted above the trailer frame Rotating latches make lifting chains quick and easy Included wrench provides leverage needed to rotate latches Designed for use with Blue Ox SwayPro weight distribution systems 2 Latch brackets and installation hardware included Made in the USA Specs: Frame height: 3" - 6" 1-Year warranty
- Weight Distribution Hitch
- Chain Hangers
- Blue Ox
Blue Ox Signature Series Underclamp Lift Brackets for SwayPro Weight Distribution Systems - Clamp On
In Stock
These clamp-on brackets are specially designed for 4" trailer frames where the body mount interferes with conventional, top-mounted latches. Used with the Blue Ox SwayPro weight-distribution system.Features: Lift brackets are specially designed for 4" trailer frames where the body mount interferes with conventional, top-mounted latches Provide clearance for accessories mounted above the trailer frame No drilling required - brackets clamp onto trailer frame Rotating latches make lifting chains quick and easy Included wrench provides leverage needed to rotate latches Designed for use with Blue Ox SwayPro weight-distribution systems 2 Latch brackets and installation hardware included Made in the USA
- Weight Distribution Hitch
- Chain Hangers
- Blue Ox
Replacement Pin for Weight Distribution Lift Brackets - Qty 1
In Stock
Replaces worn or damaged pin on the chain lift bracket of your weight distribution system. Measures 3/16" diameter. Zinc-plated steel construction is corrosion resistant. Includes 1 pin.Features: Replaces worn or damaged pin on the chain lift bracket of your weight distribution system Measures 3/16" diameter Zinc-plated steel construction is corrosion resistant Includes 1 pin
- Weight Distribution Hitch
- Pins and Clips
- JR Products
Clamp-On Lift Brackets for Blue Ox SwayPro Weight Distribution Systems - 8" Frames
Clamp these lift brackets onto your trailer's tongue to get excellent clearance for items mounted above your 8" trailer frame. Rotating design lets you quickly and easily lift the chains of your Blue Ox SwayPro weight-distribution system.Features: Clamp-on lift brackets are low-profile, allowing clearance for certain accessories mounted above the trailer frame Rotating latches make lifting chains quick and easy Included wrench provides leverage needed to rotate latches Designed for use with Blue Ox SwayPro weight-distribution systems 2 Latch brackets and installation hardware included Tape installs between the brackets and the trailer frame to prevent oxidation Fits 8" trailer frames Made in the USA
- Weight Distribution Hitch
- Brackets
- Lift Brackets
- Frame Bracket
- Blue Ox
HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.
- Truck Camper
- 8001 - 9000 lbs
- Manual Jack
- Stabilizer Jacks
- 4 Jacks
- Steel
- HappiJac
TorkLift SuperHitch Everest Weight Distribution System - No Shank - 30,000 lbs GTW, 3,000 lbs TW
In Stock
Get the most out of your TorkLift SuperHitch Magnum dual-receiver trailer hitch with this heavy-duty weight distribution system. Adjustable collar-style chain brackets and hydraulic assist make setup a snap. Hitch ball and shank sold separately.Release the pressure from the jack, repeat the process on the other side of your trailer, and you're good to tow! Adjustable Brackets Work Around Frame-Mounted Obstacles Most weight distribution systems don't give you much latitude in where you install the brackets.
- WD Only
- Shank Not Included
- 2-5/16 Inch Ball
- Allows Backing Up
- Trunnion Bar
- 1600 lbs
- 1700 lbs
- 1800 lbs
- 1900 lbs
- 2000 lbs
- 2200 lbs
- 2100 lbs
- 2300 lbs
- 2400 lbs
- TorkLift
HappiJac Manual Truck Camper Jack System - 36-1/2" Lift - 11,200 lbs
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.
- Truck Camper
- 10001 lbs or More
- Manual Jack
- Stabilizer Jacks
- 4 Jacks
- Steel
- HappiJac
HappiJac Electric Truck Camper Jack System - 36-1/2" Lift - 11,200 lbs
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. Zinc-plating resists corrosion.The concave footpad reduces movement and provides greater stability than large, convex footpads. Easy Installation The included mounting brackets are used to attach the jacks to each corner of your camper. The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.
- Truck Camper
- 10001 lbs or More
- Electric Jack
- Stabilizer Jacks
- 4 Jacks
- Steel
- HappiJac
HappiJac Electric Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. Zinc-plating resists corrosion.The concave footpad reduces movement and provides greater stability than large, convex footpads. Easy Installation The included mounting brackets are used to attach the jacks to each corner of your camper. The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.
- Truck Camper
- 8001 - 9000 lbs
- Electric Jack
- Stabilizer Jacks
- 4 Jacks
- Steel
- HappiJac
Lippert Manual Landing Gear Set w/ Handle - 37" Lift - 6,000 lbs
In Stock
... Measures 15-1/2" between weld stops. 16" of drop leg makes up almost half of the total lift. Get your 5th wheel back into action!Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Manual hand crank (included) lets you operate in case of power failure Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant components Black powder coat finish on the legs Aluminum housing for the gearbox Built-in grease zerk makes maintenance easy Bolt-on installation - uses your existing mounting brackets Weld stops are located on both sides of the legs - universal mount Hardware and additional mounting brackets are included if you need them Made in the USA Specs: Combined weight capacity: 6,000 lbs Total lift: 37" Screw travel : 21" Drop leg travel : 16" Extendable cross shaft: Minimum: 41" Maximum: 71" Footplate dimensions: 5" long x 7-15/16" wide Handle dimensions: 29-11/16" long x 10-3/16" wide 90-Day warranty Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
- 5th Wheel Camper
- 5001 - 6000 lbs
- Manual Jack
- Weld-On
- Landing Gear
- 2 Jacks
- Steel
- Lippert
Trailer Valet Round Pipe Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 3,000 lbs
In Stock
Backing a trailer into a gravel storage spot gets old when the jack drags or sinks. This swivel jack gives you 10" of lift with a wide footplate and sidewind crank, so you can raise, park, and stow the trailer without fighting the setup.Features to know about Support for Heavy Tongue Loads Loading equipment, stabilizing a parked trailer, or lining up a coupler gets harder when the jack feels undersized under tongue weight. This round pipe-mount swivel jack lifts up to 3,000 lbs and supports up to 5,000 lbs, providing stable support during hookup, storage, and trailer loading situations.
- Utility Trailer
- Enclosed Trailer
- 2001 - 3000 lbs
- Manual Jack
- Weld-On
- Swivel Jacks
- Side-Mount Jacks
- Sidewind Jack
- Trailer Valet
Trailer Valet JX Drill Powered Jack - Pipe Mount - 14-1/2" Lift - 1,800 lbs
In Stock
... The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.Heavy Lifting with Full Range Travel The trailer's packed and you want to get hooked up fast. This jack is built for it. With a strong static rating and lift capacity, it handles the weight without a fight.
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 6001 - 7000 lbs
- Drill-Powered Jack
- Manual Jack
- Weld-On
- Side-Mount Jacks
- With Rectangle Foot
- Sidewind Jack
- Trailer Valet
Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2
In Stock
... Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Breaks down into 3 pieces for storage.Place 1 jack on each side of your camper and position the L-shaped lift brackets underneath the body of the camper. Then crank the hand winches to lift or lower each side of the camper evenly until the proper height for loading or unloading is achieved.
- Truck Camper
- 3001 - 4000 lbs
- Manual Jack
- Tripod Jacks
- 2 Jacks
- Steel
- Brophy
Brophy Heavy Duty Cable Camper Jacks - 67" Max Lift Height - 4,000 lbs - Qty 2
In Stock
... Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Automatic winch brakes prevent free-spooling.Place 1 jack on each side of your camper and position the L-shaped lift brackets underneath the body of the camper. Then crank the hand winches to lift or lower each side of the camper evenly until the proper height for loading or unloading is achieved.
- Truck Camper
- 3001 - 4000 lbs
- Manual Jack
- Tripod Jacks
- 2 Jacks
- Steel
- Brophy
Ultra-Fab Deluxe Electric Landing Gear Set - Weld On - 38" Lift - 12,000 lbs
In Stock
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. ...
In the off chance that your weld stops measure either 13-1/2" or 19-1/8" between the top of the first one to the top of the bottom one, you should be able to use your existing mounting brackets, making for an easier installation. If not, then you'll need to cut those brackets off and weld on the new ones included with the kit.
In the off chance that your weld stops measure either 13-1/2" or 19-1/8" between the top of the first one to the top of the bottom one, you should be able to use your existing mounting brackets, making for an easier installation. If not, then you'll need to cut those brackets off and weld on the new ones included with the kit.
- 5th Wheel Camper
- 10001 lbs or More
- Electric Jack
- Weld-On
- Landing Gear
- 2 Jacks
- Steel
- Ultra-Fab Products
Lippert Electric Landing Gear w/ Handle - Outside Mount - 34-3/4" Lift - 5,000-lbs
In Stock
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Electric motor is an upgrade from manual methods Allows the lead and follow legs to work together at a faster rate Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Toggle switch will be right at home with your "current" electrical setup Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish Bolt-on installation - uses your existing mounting brackets Weld stops are located on the side facing toward your trailer frame - outside mount Hardware and additional mounting brackets are included if you need them Specs: Weight capacity: Single motor: 2,500-lbs per leg Dual motor: 5,000-lbs per leg Total lift: 34-3/4" Screw travel : 19-3/4" Drop leg travel : 15" Overall outer tube length: 33-1/2" Outer tube width: 2-1/2" Distance between weldstops: Inside to inside: 19-1/2" Outside to outside: 21-1/2" Rate of travel: 2-1/2" per minute Extendable cross shaft: Minimum: 41" Maximum: 72-3/4" 360 Watt DC motor Volts: 12 Amps: 30 Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
- 5th Wheel Camper
- 4001 - 5000 lbs
- Electric Jack
- Weld-On
- Landing Gear
- 2 Jacks
- Steel
- Lippert
Lippert Electric Landing Gear w/ Handle - Inside Mount - 34-3/4" Lift - 5,000-lbs
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Electric motor is an upgrade from manual methods Allows the lead and follow legs to work together at a faster rate Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Toggle switch will be right at home with your "current" electrical setup Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish Bolt-on installation - uses your existing mounting brackets Weld stops are facing the opposite leg - inside mount Hardware and additional mounting brackets are included if you need them Specs: Weight capacity: Single motor: 2,500-lbs per leg Dual motor: 5,000-lbs per leg Total lift: 34-3/4" Screw travel : 19-3/4" Drop leg travel : 15" Overall outer tube length: 33-1/2" Outer tube width: 2-1/2" Distance between weldstops: Inside to inside: 19-1/2" Outside to outside: 21-1/2" Extendable cross shaft: Minimum: 41" Maximum: 72-3/4" 360 Watt DC motor Volts: 12 Amps: 30 Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
- 5th Wheel Camper
- 4001 - 5000 lbs
- Electric Jack
- Weld-On
- Landing Gear
- 2 Jacks
- Steel
- Lippert
Ark XO Drop Down Corner RV Stabilizer Jacks - 6" Lift - Black - Qty 2
In Stock
Load-bearing stabilizers are strong enough to lift your trailer up to 6" while keeping a max bracket height of 25" - perfect for changing a tire. Legs have a combined support capacity of 3,850 lbs. ...
If you find yourself needing to use the stabilizers at an angle, you can do that. Just keep in mind that the wider lifting angle may reduce how high up you can lift the trailer. There is a marking on the inner tube of this jack to help you identify the maximum lift of 25".
If you find yourself needing to use the stabilizers at an angle, you can do that. Just keep in mind that the wider lifting angle may reduce how high up you can lift the trailer. There is a marking on the inner tube of this jack to help you identify the maximum lift of 25".
- Travel Trailer
- Teardrop Camper
- Pop Up Camper
- Manual Jack
- Weld-On
- Stabilizer Jacks
- 2 Jacks
- Steel
- Ark
Brophy Cable Camper Jack - 67" Max Lift Height - 1,500 lbs - Qty 1
In Stock
... Portable design does not require permanent installation. Simply place the lift bracket under your camper and crank to raise. Breaks down into 3 pieces for storage.Simple Operation Using this jack is simple. Place jack on the side of your camper and position the L-shaped lift bracket underneath the body of the camper. Then crank the hand winch to lift or lower the camper evenly until the proper height for loading or unloading is achieved.
- Truck Camper
- 1001 - 2000 lbs
- Manual Jack
- Tripod Jacks
- 1 Jack
- Steel
- Brophy
Dutton-Lainson Boat Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 15" Lift - 2,500 lbs
In Stock
With twice the lift of other jacks in its class, this one is ideal for trailers that sit high off the ground. Footplate stabilizes better than a caster wheel. ...
Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 8-3/16" Extended: 38-3/16" Lift: 15" Drop leg adjustment: 15" Total adjustment: 30" Adjustment hole spacing on drop leg: 4-7/16" center on center Clearance: 17" from mounting bracket to top of jack Handle swing radius: 6-1/8" Inner tube diameter: 2" Outer tube diameter: 2-1/4" 2-Year limited warranty Designed for Trailers that Sit High Off the Ground Unlike most boat trailer jacks out there, this Dutton-Lainson jack has a drop leg that will make using it faster.
Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 8-3/16" Extended: 38-3/16" Lift: 15" Drop leg adjustment: 15" Total adjustment: 30" Adjustment hole spacing on drop leg: 4-7/16" center on center Clearance: 17" from mounting bracket to top of jack Handle swing radius: 6-1/8" Inner tube diameter: 2" Outer tube diameter: 2-1/4" 2-Year limited warranty Designed for Trailers that Sit High Off the Ground Unlike most boat trailer jacks out there, this Dutton-Lainson jack has a drop leg that will make using it faster.
- Enclosed Trailer
- Boat Trailer
- Utility Trailer
- 1001 - 2000 lbs
- Manual Jack
- Bolt-On
- Side-Mount Jacks
- With Rectangle Foot
- Sidewind Jack
- Dutton-Lainson