This dual-pin, two-speed jack from RAM delivers 20,000 lb of static support and 12,000 lb of lift. Its spring-return drop leg, 4-3/8" tubing, and 9" x 9" footplate provide stable, heavy-duty performance.Features: Two-speed gearbox makes raising or lowering heavy loads faster and easier Dual-pin, spring-return drop leg lets you quickly set height without cranking Heavy-duty square tubing provides stability under maximum load Large footplate keeps the jack steady and drains water away Grease fittings and brass bushings reduce wear and simplify maintenance Black powder coat finish protects against rust and corrosion Handle assembly included for smooth sidewind operation Specs: Jack type: Two-speed, sidewind Static capacity: 20,000 lb Lift capacity: 12,000 lb Drop leg: Spring-return, dual-pin Outer tube: 4-3/8" square Travel: 26-1/2" total Screw travel: 13-1/2" Drop leg travel: 13" Footplate: 9" x 9" with drainage Finish: Black powder coat Mount: Weld-on
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 1,000 lbs Axle capacity: 2,000 lbs Length from center of spring eye to center of spring eye (unloaded): 20-3/8" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 1/4" Number of leaves: 3 Additional dimensions: see table Part Number A B C D e84SR 10-3/16" 11" 20-3/8" 3-3/16" Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Pintle hook and 2-5/16" hitch ball combo lets you hook up heavy-duty trailers of various heights to your tow vehicle. Towing capacity 20,000 lbs.Features: Pintle hook and hitch ball combo lets you hook up heavy-duty trailers of various heights to your tow vehicle Pintle hook connects to lunette ring couplers Hitch ball connects to standard ball couplers Adjustable height lets you tow trailers of different heights with the same vehicle Slide pintle hook up or down along shank and secure in place with included pins and clips Built-in anti-rattle device on shank promotes quiet towing Chrome plating on ball provides excellent rust resistance Black powder coated shank and platform are corrosion resistant Safety pin for pintle latch included Hitch pin and clip or hitch lock sold separately Pintle hook and shank may be secured with optional locking pins (C23556 - sold separately) Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: 20,000 lbs Ball size: 2-5/16" Ball hole diameter: 1-1/4" Lunette ring inside eye diameter: 2-1/2" or 3" Maximum drop: 8-3/4" Maximum rise: 2-5/8" Incremental height adjustment: 1" Limited 1-year warranty
This combination ball mount lets you haul up to 20,000 lbs with either the pintle hook or the chrome-plated 2" ball. Just slide it into your 2-1/2" trailer hitch. Durable forged steel is powder coated to resist rust.Features: Pintle hook and hitch ball combo lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Pintle hook connects to lunette ring couplers Hitch ball connects to standard ball couplers Interchangeable hitch ball can be swapped out to accommodate different sized couplers 2-5/16" ball not included Spring-loaded arm helps to secure coupler Forged steel construction is strong and durable Black powder coat finish and chrome plating on hitch ball resist rust and corrosion Tethered safety pin is included for pintle hook Hitch pin and clip (337HP6256WC - sold separately) Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Ball size: 2" Maximum gross towing weight: 20,000 lbs Maximum tongue weight: 3,000 lbs 1-Year limited warranty
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,800-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 1,400 lbs Axle capacity: 2,800 lbs Length from center of spring eye to center of spring eye (unloaded): 20-1/2" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 1-1/8" Number of leaves: 4 Additional dimensions: see table Part Number A B C D 072-013-00 10-5/8" - 20-1/2" 3-3/8" Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride.Features: Leaf spring acts as part of your trailer's suspensions system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hager mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 1,000 lbs Length from center of spring eye to center of spring eye (unloaded): 20-1/4" Spring width: 1-3/4" Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
USA-made leaf spring provides an attachment point for your trailer's axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Made in the USA Specs: Quantity: 1 leaf spring Spring capacity: 1,000 lbs Axle capacity: 2,000 lbs Length from center of spring eye to center of spring eye (unloaded): 20-3/8" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 1/4" Number of leaves: 3 Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
SecureLatch auto-locking pintle hook and hitch ball combo secures your lunette ring without you having to latch the coupler manually. Cupped hook allows for a quiet, smooth ride. Mounting plate sold separately.Features: Pintle hook and hitch ball combo lets you hook up heavy-duty trailers to your tow vehicle Provides attachment point for your lunette ring coupler Hitch ball connects to standard ball couplers Auto-locking system secures lunette ring without manual coupling Lower ring down onto ball and let auto-locking latch secure Install safety pin clip SecureLatch pintle mounts with slotted plate are sold separately Slotted mounting plate allows for easy height adjustment Built-in, rounded backing plate helps guide ring into hitch Cupped hook is designed to hold lunette ring tightly, reducing chucking and noise Create a smoother, quieter ride than standard pintle hitches Integrated hooks keep safety chains from dragging Cast iron construction is austempered for superior strength Textured gray finish resists corrosion and provides a premium look Pintle ball is constructed of high-strength, drop forged steel Corrosion-resistant zinc finish on both ball and hardware Tethered safety pin is included Hitch pin and clip or hitch lock sold separately Specs: Gross trailer weight: 20,000 lbs Ball size: 2" Ball capacity: 10,000 lbs Ball hole diameter: 1-1/4" Dimensions: 7-3/8" long x 7-1/8" tall Fits lunette ring couplers with a diameter of 2-1/2" or 3" Limited lifetime warranty
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 1,400-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 700 lbs Axle capacity: 1,400 lbs Length from center of spring eye to center of spring eye (unloaded): 20-7/16" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 11/16" Number of leaves: 3 Additional dimensions: see table Part Number A B C D 072-016-00 10-5/8" - 20-7/16" 3-1/8" Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
Heavy-duty, 1-piece forged ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Solid, 1-piece forged steel construction Corrosion-resistant, carbide black powder coat finish Both drop and rise positions available to ensure level towing Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receiver Maximum gross trailer weight : 20,000 lbs Maximum tongue weight : 2,700 lbs Length: 8-1/2" from center of hitch pin hole to center of ball hole Rise: 2-1/2" from top of inside of hitch opening Drop: 4" from top of inside of hitch opening Ball hole diameter: 1-1/4" Limited lifetime warranty
Heavy-duty, 1-piece forged ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Solid, 1-piece forged steel construction Corrosion-resistant, carbide black powder coat finish Both drop and rise positions available to ensure level towing Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receiver Maximum gross trailer weight : 20,000 lbs Maximum tongue weight : 2,700 lbs Length: 8-1/2" from center of hitch pin hole to center of ball hole Rise: 1/2" from top of inside of hitch opening Drop: 2" from top of inside of hitch opening Ball hole diameter: 1-1/4" Limited lifetime warranty
This combination ball mount lets you haul up to 20,000 lbs with either the pintle hook or the chrome-plated, 2-5/16" ball. Slides into your 2-1/2" x 2-1/2" trailer hitch receiver. ... Features: Pintle hook and hitch ball combo lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Pintle hook connects to lunette ring couplers Hitch ball connects to standard ball couplers Strong forged steel construction with rust-resistant finishes High-gloss black powder coat finish on pintle hook and shank Chrome-plated hitch ball Tethered safety pin is included for the pintle hook Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Fits lunette ring couplers with a minimum inner diameter of 2-1/2" Ball size: 2-5/16" Gross towing weight: 20,000 lbs Maximum drop: 3" Overall length: 15" Length from center of hitch pin hole to center of pintle hook: 9-1/2" Length from center of hitch pin hole to center of hitch ball: 11-1/4" Pin hole diameter: 5/8" 1-Year limited warranty
If your trailer ride is starting to feel rough or worn out, this double-eye leaf spring is an easy way to smooth things back out. It gives you solid support and helps keep everything riding more stable and controlled when you're towing.Features: Leaf spring provides suspension support for trailer axle to help maintain stability and absorb road shock Double-eye spring design allows secure mounting to hangers for smooth suspension movement 3-Leaf spring design helps balance strength and flexibility for everyday towing 20.38" Length fits compatible trailer suspension setups Capacity rated at 1,000 lbs per spring
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.Features: Upgrades your trailer's suspension to save you time and money on maintenance Excellent for boat trailers or any trailer regularly exposed to salt-treated roads Resists rust and corrosion with a dacromet finish that has a salt spray rating of 700 hours Mounts to your trailer's existing hangers with suspension hardware (sold separately) Constructed of sturdy steel Includes nylon bushings Specs: Quantity: 1 leaf spring Leaf springs should always be replaced in pairs to ensure proper axle alignment Spring capacity: 1,000 lbs Axle capacity: 2,000 lbs Length from center of spring eye to center of spring eye: 20-3/8" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 1/4" Number of leaves: 3 Additional dimensions: see table Limited lifetime warranty Part Number A B C D e53SR 10-3/16" 11" 20-3/8" 3-3/16" If you're replacing a busted or rusted-out spring on your trailer - or if you've decided to upgrade to dacromet to avoid rusted-out springs down the line - the first thing you'll need to do is measure your existing leaf springs.
Straight trailer idler axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 12" wheels. EZ-Lube spindles for simple lubrication.
Round trailer axle beam measures 72" from hub-face-to-hub-face and 58" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12-1/4" x 4" Assemblies fit 16" or larger wheels. Backing plate has a 7-bolt pattern. Made in the USA.Once you're there, set your brake controller to its maximum setting and get moving. Speed up to about 40 mph and brake to slow to about 20 mph. Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.
Trailer axle measures 86-1/2" from hub face to hub face, 71-1/2" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.
Sturdy steel ball mount with a solid shank measures 13-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.
This steel, adjustable ball mount lets you tow up to 10,000 lbs with the 2" ball or 20,000 lbs with the 2-5/16" ball. Can be used in 5-1/2" drop or 4-1/2" rise positions. Fits 2-1/2" x 2-1/2" hitch receivers.Features: Ball mount with dual-ball platform lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Mount can be flipped to use in either a rise or drop position Slide ball mount up or down along shank and secure in place with included pins and vibration-resistant clip 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, rotate balls, and reinsert pins Adjusts in 1-1/4" increments Ball mount doubles as a weight-distribution shank Anti-rattle design helps to reduce towing noise Heavy-duty steel construction Black powder coat on ball mount and yellow zinc trailer balls resist corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: When used with 2" ball: 10,000 lbs When used with 2-5/16" ball: 20,000 lbs Tongue weight: When used with 2" ball: 1,000 lbs When used with 2-5/16" ball: 2,000 lbs Maximum rise: 4-1/2" Maximum drop: 5-1/2" Distance between vertical adjustment holes: 1-1/4" Pin hole diameter: 5/8" Limited 1-year warranty
Waterproof LEDs in this dome light are vibration-resistant when driving over rough roads to the campsite. Recesses into the ceiling of your RV for a sleek, low-profile look and wires to a light switch so you can easily turn the light on and off.
Filters
