This Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. Winding handle included.
Ideal for the rigors of off-road towing, this fully articulating coupler pairs with a vehicle-side Lock N Roll hitch (sold separately) to form a strong connection that is safe and secure, no matter the terrain. Bolts or welds to your A-frame trailer.Features: A-frame trailer coupler links with Lock 'N' Roll vehicle-side hitch (sold separately) to hook up your trailer to your tow vehicle Bolts or welds directly onto your A-frame trailer Provides attachment point for vehicle-side hitch More secure connection than with a traditional hitch ball Outer tabs on trailer-side coupler interlock with vehicle-side hitch to form a strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Head unit pivots side to side Full articulation when paired with vehicle-end hitch - setup pivots up and down and rotates 360 degrees Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Steel alloy construction is strong and durable Black paint finish resists corrosion Built-in jack attachment point allows for quick, easy mounting of round utility jack Meets SAE J684 towing safety regulations Made in the USA Specs: Maximum gross trailer weight: 11,000 lbs Maximum tongue weight: 1,100 lbs Jack hole diameter: 2-5/16" Limited lifetime warranty This coupler combines with a Lock 'N' Roll vehicle-end hitch (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
Backing a boat trailer into storage gets old when the jack drags or fights tight turns. This swivel jack bolts to 2 in. to 4 in. frames, includes a 6 in. caster wheel, and pivots up for travel so you can move the trailer by hand. 1,000 lb capacity.Swivels up Before You Hit the Road A trailer jack that hangs low during towing is usually the first thing to complain when the trailer hits a steep driveway or uneven pavement. This swivel design lets the jackpivot down for use, then swing up once the trailer is hitched.
Your arm stalls mid-crank with a loaded tongue. Been there. This swivel bolt jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. It pivots up for clearance, and hitching doesn't drag on.Swivels Up for Travel: Pivot the jack alongside the trailer frame so it stays out of the way on the road. Holds Up to Outdoor Use: E-coat, powder coat, and zinc plating help protect the steel from corrosion.
Add hydraulic lift to an A-frame work trailer with this 7K double-acting jack. It connects to an external HPU through #6 JIC ports, bolts to a 5" x 5" mounting pattern, and provides 20" of lift with a pivoting 7" foot.The cylinder is double acting, so hydraulic pressure powers both extension and retraction. At the ground, the 7" x 7" pivoting foot follows changes in the surface to maintain a broad contact point as the trailer moves. Match the Jack to Your Hydraulic System This jack does not include its own pump.
Upgrade a heavy A-frame trailer from manual cranking with a self-contained 8K hydraulic jack. Its 12V double-acting pump, keyed pendant, 24" of lift, and drill-operated manual override give you powered operation with a backup for power loss.The jack measures 33-1/2" retracted and 57-1/2" extended. At the ground, the 8" x 8" foot pivots as the trailer moves, helping maintain a broad contact point when the surface is not perfectly level.
Your arm stalls mid-crank trying to lift a loaded boat trailer at the ramp. Been there. This 1,500 lb aluminum swivel jack accepts a 3/4" socket so a drill does the lifting. The wheel rolls the trailer into place and holds up to saltwater use.Swivels Up for Travel: Pivot the jack alongside the trailer frame so it stays clear of the road. Better Suited for Marine Use: Aluminum construction and stainless steel hardware resist corrosion around the water.
Add hydraulic lift to an A-frame work trailer with this 7K double-acting jack. Includes 4 hoses, 8 fittings, and a diverter to help connect it to an external HPU, while 20" of lift handles hitching and unhitching.The cylinder is double acting, so hydraulic pressure powers both extension and retraction. At the ground, the 7" x 7" pivoting foot follows changes in the surface to maintain a broad contact point as the trailer moves. Connect the Jack to Your External Hydraulic System This jack does not include its own pump.
Upgrade a heavy trailer with a 20K tandem hydraulic jack system. Two 12K legs share one 12V pump for powered lifting with 24" of lift, plus a manual override gives you a backup if the trailer loses power.This Bigfoot system gives you 20,000 lbs of combined lifting capacity with two heavy-duty hydraulic legs, each providing 24" of lift, so the pump handles the work instead of a manual crank. Each jack uses a 10" x 10" pivoting foot to give the trailer a broad contact point on the ground. With two legs supporting the front of the trailer, you also get a wider stance than a single center-mounted jack.
Upgrade a heavy cargo, livestock, or equipment trailer with a self-contained 12K hydraulic jack. The integrated 12V pump, keyed control, 24" of lift, and manual override give you powered operation with a backup for power loss.This Bigfoot system gives you 12,000 lbs of hydraulic lifting capacity and 24" of lift, letting the onboard pump handle raising and lowering the trailer. It is a true single-point setup with one jack and one hydraulic power unit, so you are not tying the jack into a separate trailer hydraulic system. The pump, reservoir, and hydraulic connections stay together at the front of the trailer, while the 10" x 10" pivoting foot helps maintain solid contact when the ground is not perfectly level.
Upgrade a heavy cargo, livestock, or equipment trailer from manual cranking with a self-contained 12K hydraulic jack. The integrated 12V pump, keyed control, mounting hardware, and 24" of lift give you a complete powered setup.This Bigfoot system gives you 12,000 lbs of hydraulic lifting capacity and 24" of lift, letting the onboard pump handle raising and lowering the trailer. It is a true single-point setup with one jack and one hydraulic power unit, so you are not tying the jack into a separate trailer hydraulic system. The pump, reservoir, and hydraulic connections stay together at the front of the trailer, while the 10" x 10" pivoting foot helps maintain solid contact when the ground is not perfectly level.
Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.Features: Hydraulic jack kit contains everything you need to lift your tandem axle trailer quickly and safely Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Double acting pump and power unit attach to the jacks with included hoses and fittings Pump offers up to 3,200 psi extension and 1,500 psi retraction pressures Selector valves create smooth and efficient operation, even for heavy loads Pivoting foot pads stabilize on uneven surfaces Square tubes with durable exterior-grade black finish welds onto your trailer's frame Specs: Lift: 20" Bracket height: 30-3/4" Retracted 50-3/4" Extended Lift capacity: 10,000 lbs per jack 20,000 lb combined Support capacity: 12,000 lbs per jack 24,000 lbs combined Maximum hydraulic flow rate: 2 GPM Maximum pressure: Raising: 3,200 psi Lowering: 1,500 psi 3-Year warranty Note: Color may vary.
Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.Features: Hydraulic jack kit contains everything you need to lift your single axle trailer quickly and safely Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Double acting pump and power unit attach to the jack with included hoses and fittings Pump offers up to 3,200 psi extension and 1,500 psi retraction pressures Selector valve creates smooth and efficient operation, even for heavy loads Pivoting foot pad stabilizes on uneven surfaces Square tube with durable exterior-grade black finish bolts onto your trailer's frame Specs: Lift: 20" Bracket height: 30-3/4" Retracted 50-3/4" Extended Footplate dimensions: 9-1/2" x 9-1/2" Tube outer dimensions: 4" x 4" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Maximum hydraulic flow rate: 2 GPM Maximum pressure: Raising: 3,200 psi Lowering: 1,500 psi 3-Year warranty
Level and lift a heavy trailer with two 12K hydraulic legs, each powered by its own 12V pump. Independent controls let you adjust either side separately, while manual overrides give you a backup if the trailer loses power.Each jack also uses a 10" x 10" pivoting foot for a broad contact point on the ground. Independent Control with a Backup at Each Pump The wired control panel has separate extend and retract switches for the two jacks, letting you operate either side from one control point.
Upgrade a heavy trailer with a 20K tandem hydraulic jack system. Two 12K legs share one 12V pump for powered lifting with 24" of lift. Complete install hardware is included; this setup does not provide side-to-side leveling.This Bigfoot system gives you 20,000 lbs of combined lifting capacity with two heavy-duty hydraulic legs, each providing 24" of lift, so the pump handles the work instead of a manual crank. Each jack uses a 10" x 10" pivoting foot to give the trailer a broad contact point on the ground. With two legs supporting the front of the trailer, you also get a wider stance than a single center-mounted jack.
Level and lift a heavy trailer with two 12K hydraulic legs, each powered by its own 12V pump. Independent controls let you adjust either side separately, while 24" of lift and a 24K combined capacity handle demanding trailers.Each jack also uses a 10" x 10" pivoting foot for a broad contact point on the ground. Two Pumps Give You Independent Control The wired control panel has separate extend and retract switches for the two jacks, letting you operate either side without moving between separate controls.
Smooth and powerful hydraulic jacks upgrade your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.Features: Add these hydraulic jack legs to your existing hydraulic setup to lift your trailer quickly and safely Hydraulic pump and power unit sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Selector valves create smooth and efficient operation, even for heavy loads Pivoting foot pads stabilize on uneven surfaces Square tubes with durable exterior-grade black finish welds onto your trailer's frame Specs: Lift: 20" Height: 30-3/4" Retracted 50-3/4" Extended Lift capacity: 10,000 lbs Support capacity: 12,000 lbs 3-Year warranty
Smooth and powerful hydraulic jack upgrades your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.Features: Add this hydraulic jack leg to your existing hydraulic setup to lift your trailer quickly and safely Hydraulic pump and power unit sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Selector valve creates smooth and efficient operation, even for heavy loads Pivoting foot pad stabilizes on uneven surfaces Square tube with durable exterior-grade black finish welds onto your trailer's frame Specs: Lift: 20" Bracket height: 30-3/4" Retracted 50-3/4" Extended Footplate dimensions: 9-1/2" x 9-1/2" Tube outer dimensions: 4" x 4" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs 3-Year warranty
Powerful hydraulic jack with self-contained pump and power unit lets you lift heavy loads with a press of a button. Pivoting foot pad stabilizes the jack on rough terrain.Features: Hydraulic jack contains everything you need to lift your trailer quickly and safely Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Self-contained pump and power unit comes attached to the jack Pump offers up to 3,200 psi extension and 1,500 psi retraction pressures Pivoting foot pad stabilizes on uneven surfaces Square tube with durable exterior-grade black finish bolts onto your trailer's frame Specs: Lift: 20" Bracket height: 30-3/4" Retracted 50-3/4" Extended Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Maximum hydraulic flow rate: 2 GPM Maximum pressure: Raising: 3,200 psi Lowering: 1,500 psi 3-Year warranty
Add 8,000 lbs of hydraulic lifting capacity to a heavy work trailer with this direct-weld square jack. Its double-acting cylinder provides 20" of powered lift and connects to an external hydraulic power unit through #6 JIC ports.The square-tube body is designed for a permanent direct-weld installation on the trailer frame. At the ground, the 6" x 7-3/4" pivoting foot follows changes in the surface to maintain a broad contact point as the trailer moves. Match the Jack to Your Hydraulic System This jack does not include its own pump.
Smooth and powerful hydraulic jack lifts your heavy load without your help. Just press the button on the corded remote control to lift and lower your trailer. The large, pivoting foot pad stabilizes the jack even on rough terrain.Features: Hydraulic jack Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Smooth and effortless operation, even for heavy loads Self-contained pump and power unit comes attached to the jack Convenient corded remote control switch Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Lift: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs 500W 12V DC dual motor Reservoir capacity: 2.5 quarts Maximum pump load: 3,000 psi Working pressure: 1,500 psi Mounting tabs: 7-1/2" x 4" Foot pad: 10" long x 10" wide 1-Year warranty
Weld-on, pipe-mount swivel jackpivots up for travel. Square design provides solid side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Belly band welded to the outer tube provides extra strength Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-1/2" Extended Lift: 15" Drop leg adjustment: 13-1/2" Total adjustment: 28-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Replacement jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Welds on.Features: Replaces 1 Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Welds on Provides stability with large, pivoting footplate Black paint finish Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Foot pad: 10" long x 10" wide Quantity: 1 leg 1-Year warranty
Filters
