Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. ... The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.If you're setting up before sunrise or rolling in late, the built-in LED lights up your coupler. And if you ever lose power, the backup crank lets you finish hooking up and move on. SnapPad Adds a Wider Footprint This kit includes a 7-3/4" octagonally-shaped SnapPad, with a 6" round inset, that permanently attaches to the jack's foot plate.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 5,000 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.The drop leg extends up to 9-3/4" and adjusts in 2" increments, helping you get closer to the ground before using the motor. A built-in LED lights your coupler when you're hitching up before sunrise or after dark, and the included manual backup crank keeps the jack usable if electrical power isn't available.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.If you're setting up before sunrise or rolling in late, the built-in LED lights up your coupler. And if you ever lose power, the backup crank lets you finish hooking up and move on. SnapPad Adds a Wider Footprint This kit includes a 7-3/4" octagonally-shaped SnapPad, with a 6" round inset, that permanently attaches to the jack' foot plate.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.No Fuss, No Guesswork No complicated wiring or special tools needed here. Just bolt the jack on with the included hardware, wire the pigtails to your 12-volt power source, and you're ready for the next trip. How to Pick the Right Trailer Jack Capacity Your jack just needs to lift the tongue weight - usually 10 - 15% of your trailer's total weight.
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 27-1/2", and 18" of screw travel. ... Features: Electric jack lets you raise and lower your A-frame trailer Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location 2 Toggle switches on the front of the housing let you operate the jack On/off switch controls light Extend/retract switch controls up and down movement LED light illuminates at a downward angle to help you focus on your coupler Emergency crank (included) allows you to manually operate jack if needed Requires a 3/8" socket to use the manual crank Black powder coated outer tube Zinc-finished inner tube and footplate resist corrosion Simple, bolt-on installation - hardware not included Wires to 12-volt power source 12-Gauge wires Serrated washer included for ground connection Specs: Bracket height: Retracted: 9-1/2" Extended: 27-1/2" Without drop leg 35" With drop leg Total lift: 25-1/8" Screw travel: 18" Drop leg travel: 5-5/8" Clearance: 20-1/2" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Hole spacing on drop leg: 1-7/8" Footplate diameter: 5-1/2" Lift capacity: 3,500 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
... LED lights on both sides boost visibility at night.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
... LED lights on both sides boost visibility at night.Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set up your camper at night Also ease weight distribution hookup and disconnect Bubble level on top of housing helps you level your trailer Bull's-eye design shows front to back and side to side Drop leg allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist fading Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on installation for A-frame trailers 3 Star washers included for making a good ground from jack to trailer Mounting hardware sold separately Specs: Total lift: 23" Screw travel: 18" Drop leg: 5" Lift capacity: 4,500 lbs 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. ... Features: Electric jack lets you raise and lower your A-frame trailer Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location 2 Toggle switches on the front of the housing let you operate the jack On/off switch controls light Extend/retract switch controls up and down movement 7-way RV-style plug pulls power from your vehicle's trailer connector No need to manually wire for power 7-Way must have active 12 volt pin LED light illuminates at a downward angle to help you focus on your coupler Emergency crank (included) allows you to manually operate jack if needed Black powder coated outer tube Zinc-finished inner tube and footplate resist corrosion Simple, bolt-on installation Specs: Bracket height: Retracted: 9" Extended: 28-1/2" Total lift: 25-1/8" Screw travel: 19-1/2" Drop leg travel: 5-5/8" Clearance: 20-1/2" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Hole spacing on drop leg: 1-7/8" Footplate diameter: 5-1/2" Lift capacity: 3,500 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric jack has a drop leg for 4-1/2" of lift on top of the 18" of screw travel. Large footplate minimizes sinking. Jack can be welded or bolted onto any A-frame trailer. ... Features: Tongue jack positions quickly and easily with integrated drop leg 12V Motor powers jack, eliminating need for hand cranking Built-in toggle switch for easy operation Integrated circuit breaker prevents motor damage All-steel gears are strong and durable Large front light makes it simple to set up your camper at night LEDs last longer and use less energy than incandescent bulbs Lamp is positioned so that it directs light downward to better focus on ground Emergency, ratchet-style crank socket 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Zerk fitting on the lower stem assembly allows access to grease the threaded rod which leads to a longer jack life Easy bolt-on or weld-on installation for A-frame trailers Hardware not included Mounting holes fit 2-1/4" spacing Extra-large footplate provides excellent stability Die-cast aluminum cap resists corrosion Sturdy steel construction with black powder coat finish Specs: Bracket height: 9-1/2" Retracted with footplate retracted 27-1/2" Extended with footplate retracted 32" Extended with footplate extended Total lift: 22-1/2" Screw travel: 18" Drop leg travel: 4-1/2" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 29.8 seconds Retracts 6" in 27.6 seconds Lift capacity: 4,000 lbs Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 6" 5-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Switch-operated jack has 18" of screw travel and a 4-1/2" drop leg. Retracted height is 9" and extended height is 27". 7-Way plug makes setup easy. ... Features: Electric jack lets you raise and lower your A-frame trailer quickly and easily 7-Way RV-style plug pulls power from your vehicle's trailer connector No need to manually wire for power Weather-sealed toggle switch on underside of housing extends and retracts jack for easy operation 2 LED lights on either side make it simple to set up your camper at night Red button on back of jack turns lights on Convenient built-in leveling gauge lets you see if your setup is level Integrated circuit breaker prevents motor damage Emergency crank (included) allows you to manually operate jack if needed Crank inserts into socket beneath level Drop leg allows for increased lift and saves time when raising or lowering Sturdy carbon steel construction Black powder coated outer tube Zinc-finished inner tube and footplate resist corrosion Easy bolt-on installation Specs: Bracket height: Retracted: 9" Extended: 27" Total lift: 22-1/2" Screw travel: 18" Drop leg travel: 4-1/2" Overall height when full extended: 31-1/2" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 29 seconds Retracts 6" in 26.4 seconds Footplate diameter: 5-1/2" Outer tube diameter: 2-1/2" Clearance (bracket to top of level gauge): 19-1/2" Lift capacity: 3,500 lbs Motor: 12V Power cord length: 4' 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. ... Features: Electric jack lets you raise and lower your A-frame trailer Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location 2 Toggle switches on the front of the housing let you operate the jack On/off switch controls light Extend/retract switch controls up and down movement LED light illuminates at a downward angle to help you focus on your coupler Emergency crank (included) allows you to manually operate jack if needed Black powder coated outer tube Zinc-finished inner tube and footplate resist corrosion Simple, bolt-on installation Wires to 12-volt power source 12-Gauge wires Serrated washer included for ground connection Specs: Bracket height: Retracted: 9" Extended: 28-1/2" Total lift: 25-1/8" Screw travel: 19-1/2" Drop leg travel: 5-5/8" Clearance: 20-1/2" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Hole spacing on drop leg: 1-7/8" Footplate diameter: 5-1/2" Lift capacity: 3,500 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Stable, ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" lift, 5-1/2" drop leg.The overall size and durability of these wheels also keep them from stalling in sand or light mud. The durable design of this jack lets you take your trailer off-road, over rough terrain, and through various climates. The sturdy steel, square body provides increased side-load capacity and superior strength, and limits play between the tubes.
Replaces the light board for your etrailer electric jack (EJ-3520-BBX or EJ-3520-WBX).Features: Replaces the light board for your etrailer electric jack (EJ-3520-BBX or EJ-3520-WBX)
Replaces the light switch on your electric A-frame trailer jack with footplate (EJ-3520-BBX). Includes 1 light switch.Features: Replaces the light switch on your electric A-frame trailer jack with footplate (EJ-3520-BBX) Quantity: 1 light switch
Replaces the LED light module for your Lippert electric trailer jack (LC285318).Features: Replaces the LED light module for your Lippert electric trailer jack (LC285318) Quantity: 1 LED light module
Replaces a damaged LED light for your Stromberg Carlson electric A-Frame tongue jack (JET-2500, JET-3500, JET-3555, and JET-3755). Includes 1 replacement LED light with 2-wire pigtail.Features: Replaces a damaged LED light for your Stromberg Carlson electric A-Frame tongue jack Fits models JET-2500, JET-3500, JET-3555, and JET-3755 Includes 1 replacement LED light with 2-wire pigtail
Replaces the light on/off switch for your Stromberg Carlson electric tongue jack.Features: Replaces the light on/off switch for the Stromberg Carlson electric A-frame tongue jack Works with 2500 lb jack (JET-2500) Works with 3500 lb jacks (JET-3555 and JET-3755) Works with 5000 lb jack (JET-5000) Fits: Stromberg Carlson 2500 lb electric tongue jack: JET-2500 Stromberg Carlson 3500 lb electric tongue jack: JET-3555 and JET-3755 Stromberg Carlson 5000 lb electric tongue jack: JET-5000
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.The drop leg extends up to 4-1/2", helping you get closer to the ground before using the motor. A built-in LED lights your coupler when you're hitching up before sunrise or after dark, and the included manual crank keeps the jack usable if electrical power isn't available.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.The drop leg extends up to 9-3/4" and adjusts in 2" increments, helping you get closer to the ground before using the motor. A built-in LED lights your coupler when you're hitching up before sunrise or after dark, and the included manual backup crank keeps the jack usable if electrical power isn't available.
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Power Connection: Wires directly to 12V power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Drop leg adjustment: 4-1/2" Total adjustment: 22-1/2" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Filters
