Backing up in the dark? This light's got your back. It fits right into your trailer's 6-1/2" cutout and throws steady white light through a smoked lens. ... Low Draw, High Output: Draws just 0.26 amps at 12V, enough brightness to cut through the dark without tripping a circuit. Street Legal Backup Light: Meets DOT standards for backup lights. Compliant and visible on the road, day or night. Features to know about Clear Vision When It Counts (Which Is Always) Backing into a dark driveway or lining up a trailer after sunset isn't when you want your lighting to fail.
Replace the vent cover on your Elixir trailer roof vent (made after 1995) or your Ventline trailer roof vent (V2094 - made before 2008) with this equivalent part. Fits 14-1/4" x 14-1/4" openings.
... It installs easily and covers all your essential lighting needs.Features: Trailer light kit designed to provide complete lighting for trailers under 80" wide Includes tail lights, side marker lights, wiring harness, and license bracket Provides all required lighting and reflectors for DOT compliance 20&' Trailer harness allows full trailer connection License bracket made of corrosion-free black plastic that flexes on impact Mounting hardware and installation instructions included Easy installation for complete setup Includes 1 complete trailer light kit Specs: Application: Trailers under 80" wide Tail light dimensions: 4-3/4" x 4-1/2" Harness length: 20' Light colors: Red, white, amber
Recess this dome light into the ceiling of your RV for a sleek, low-profile look and use the integrated switch to turn it on and off. Angle the light to your side of the bed when winding down with a good book. 2 Incandescent light bulbs are included.Pivoting Lights Can Be Angled Side to Side The 2 lights on this dome light can pivot side to side, so you and your partner can each angle a light onto your sides of the bed when winding down with a good book.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". ... Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
Plug this adapter into your existing 7-way when towing a trailer equipped with LED lights so that your vehicle's computer will recognize the trailer's signals. Designed for use on vehicles with Trailer Lamp-Out sensors.Features: Plugs into an existing 7-way socket to provide a new 7-way socket that is able to recognize LED trailer lights Built-in resistors enable LED signals from your trailer to be read by your vehicle's computer No cutting or splicing required Great for use on vehicles with Trailer Lamp-Out sensors, such as Audi, Mercedes-Benz, and Volkswagen vehicles with the factory tow package Spring-loaded dust cover protects terminals from moisture and debris when connector is not in use 1-Year limited warranty
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
15-1/2" Long x 1" tall x 1/2" thick ID light bar. Waterproof LED identification light bar with integrated utility light for trailers. Polycarbonate lenses and base. Surface mount. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
... Red light.Features: Oblong trailer tail light serves 3 functions Stop light Tail light Turn signal light Smoked lens works great with blacked-out style on vehicles or trailers Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Mounts on surface with built-in black flange - hardware not included 3-Wire pigtail DOT compliant Specs: Overall dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Weight:.44 lbs Diodes: 9 Voltage: 12V Amp draw: Tail: 0.01A Stop: 0.2A Lifetime LED warranty
6-1/2" x 2-3/8" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Mounts Fast: Strong magnetic bases stick securely to any trailer or towed vehicle. All Signal Functions: Stop, turn, and tail lights provide everything you need for towing. Great for Temporary Use: Ideal for flat towing or when trailer lights aren't working.
4" Round waterproof LED trailer light with 24 diodes provides stop, turn, tail, and back-up functions. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). ... LEDs vs. Incandescent Lights The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... LEDs vs. Incandescent Lights The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-1/16" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 15 Voltage: 12V Power draw: 0.29 amps Lifetime warranty on LEDs Quantity: 1 light bar
4-1/4" Round. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... Features: Round backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights is installed (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible GloLight Series features a brighter outer ring of light with a smooth appearance LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Light fits into a 4-1/2" diameter hole Accepts industry-standard 2-prong plug (sold separately) DOT compliant Meets FMVSS 108 requirements Specs: Dimensions: 4-1/4" diameter x 2-3/16" deep Diodes: 21 Power draw at 12.8 volts: 0.425 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! ... Bullet Lights: Style and Safety Also known as bullet lights, these compact LEDs are popular for more than just visibility. Used in multiples, they help keep your trailer street legal while adding a custom look.
Incandescent vanity light brightens up your RV bathroom mirror for your pre-hike morning ritual. Acrylic light shade has a stylish white swirl design that softens the glare of the bright light. ... Features: Incandescent vanity light is perfect above a mirror in your RV bathroom or bedroom Included incandescent 921 light bulbs provide bright yellow light Curved glass light shades with a frosted white swirl design soften the glare of the bright lights Durable steel construction with satin nickel finish Bolt-on installation onto the wall - hardware not included Wires to a light switch inside your RV or camper - connect to ground and power UL 39U4 listed Specs: Overall dimensions: 18-1/2" long x 3-1/2" tall x 2-5/8" deep Base dimensions: 18-1/2" long x 2-1/2" tall x 1" deep Mounting hole spacing (center to center): 17" long x 1" tall Voltage: 12V DC Incandescent bulb type: 921 or 912 Number of bulbs: 3 1-Year warranty Need a brighter light over the mirror in your RV bathroom so you can better see yourself while getting ready for the day?
Incandescent vanity light brightens up your RV bathroom mirror for your pre-hike morning ritual. Acrylic light shade has a stylish white swirl design that softens the glare of the bright light. ... Features: Incandescent vanity light is perfect above a mirror in your RV bathroom or bedroom Glass light shades with a frosted white swirl design soften the glare of the bright lights Durable steel construction with satin nickel finish Bolt-on installation onto the wall - hardware not included Wires to a light switch inside your RV or camper - white for ground and black for power 3 Incandescent 912 or 921 light bulbs not included UL 39U4 listed Specs: Overall dimensions: 18" long x 2" tall x 5" deep Base dimensions: 18" long x 2" tall x 3/4" deep Mounting hole spacing (center to center): 6" long Voltage: 12V DC 1-Year warranty Need a brighter light over the mirror in your RV bathroom so you can better see yourself while getting ready for the day?
Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! ... Bullet Lights: Style and Safety Also known as bullet lights, these compact LEDs are popular for more than just visibility. Used in multiples, they help keep your trailer street legal while adding a custom look.
3/4" Round. Waterproof mini trailer light functions as both a clearance light and a side marker light when properly mounted. 2 Amber LEDs create a smooth, bright circle of light. ... The circuit board is sealed, which means that water will not damage the diodes or circuit board. PC-Rated Lights A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light.
This long, thin tail light fits in those tight spaces on your trailer or truck where you couldn't fit anything else. It mounts on the surface and wires to your trailer with the included 3-wire pigtail.Features: Thinline Series light fits in tight spaces GloLight tail light is bright and easy to see, day or night Bar glows for tail light Center LEDs light up for brake light and flash for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount Hardware not included 3-wire pigtail wires to trailer Black wire for tail light Red wire for brake and turn signal White wire with #10 ring terminal for ground DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 17" long x 1-3/8" tall x 1" thick Mounting holes: 16-1/8" apart on center Pigtail harness length: 7" Diodes: 28 Power draw at 12.8 volts: Stop/turn signal light: 0.634 amps Tail light: 0.445 amps Lifetime LED warranty
15-9/16" L x 1-3/16" W x 1-5/16" D; Three separate lights on the base; lights have replaceable lenses and bulbs; surface mount on 6-1/8" centers; 1-wire; total of 3 incandescent bulbsThis red three light bar measures 15-9/16" long x 1-3/16" wide x 1-5/16" deep. Light bar contains three separate, replaceable MC68RB lights on a white base.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 20-1/2" long x 1" wide x 3/4" thick Distance between mounting holes: 19-5/8" Diodes: 21 Voltage: 12V Power draw: Stop/turn: 0.265 amps Tail: 0.24 amps Reverse: 0.30 amps Lifetime warranty on LEDs
Filters
