Replaces 1 of the mounting brackets for your CE Smith pontoon boat trailer guide-ons (CE27672).Features: Replaces 1 of the mounting brackets for your CE Smith pontoon boat trailer guide-ons (CE27672) Works for 1-1/2" square-tube guide-ons Constructed of 11-gauge, pre-galvanized, steel for rust resistance Specs: Length: 6-3/8" Distance between mounting holes (center to center): Outer holes: 3-13/16" Inner holes: 2-15/16" Quantity: 1 bracket
Use this bracket to mount a tail light on your boat trailer's post-style guide-on. Keeps light out of the water and away from your boat. Pre-galvanized steel resists corrosion. ... Features: Sturdy bracket provides mounting point for 1 tail light (sold separately) on your boat trailer's post-style guide-on Extends light 7-1/2" away from your trailer Keeps light out of the water to prevent damage while loading or unloading your boat 12-Gauge, pre-galvanized steel construction resists corrosion Simple installation Drill holes and bolt bracket onto guide-on Easily attach your surface-mount tail light onto the bracket Mounting hardware included Made in the USA Specs: Application: surface-mount tail lights Fits 2" diameter guide-on post Quantity: 1 bracket Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
Easily load your pontoon boat with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with endcaps. They fit trailer frames up to 3" wide x 4-1/4" tall. ... The galvanized steel support posts mount on top of the crossmember on your pontoon boat trailer's frame. Just slide the posts into the mounting brackets and secure the posts so that the distance between each bunk and pontoon is approximately 2" to 3". The rubber roller guides help to center your pontoon boat during loading and to support the boat during transport.
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. They fit trailer frames up to 3" wide x 4-1/4" tall.Features: Roller-style guides support your boat and keep it centered while you're loading it onto your trailer Support posts clamp onto top or bottom of trailer frame Mounting brackets allow you to adjust the distance between posts Galvanized steel construction is sturdy and resists corrosion Mounting hardware included Black rubber rollers with end caps protect your boat's finish Parts included: 2 Galvanized tube assemblies with rubber rollers 2 Galvanized U-brackets 2 Black plastic caps (8) 3/8" - 16 Nylon locknuts (8) 3/8" Stainless steel flat washers (2) 3/8" - 16 x 3-1/2" x 5" U-Bolts (2) 3/8"-16 x 3-1/2" x 5" Formed U-bolts Made in the USA Specs: Quantity: 2 roller-style boat guides Application: trailer frames up to 3" wide x 4-1/4" tall Extra-long U-bolt kit (CE11416 - sold separately) is required for mounting on frames up to 3" wide x 5-1/4" tall Center roller length: 9" Overall roller length: 13" Post dimensions: 15" tall x 1-1/2" wide Adjustable boat guides can be fine-tuned to work with your boat and your trailer.
Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).Features: Bunk-board kit lets you create 2 guide-ons to support your boat and keep it centered while you're loading it onto your trailer 2x4 Lumber for bunk boards not included 90-Degree-angled tubes let you mount the bunks close to your boat Great for narrow boats Bolt-on installation - clamp onto top or bottom of your trailer's frame Pre-galvanized steel construction is sturdy and corrosion-resistant Marine-grade carpeting lines bunk boards to protect your boat's finish 2 Rolls included to cover 2 boards U-bolts, brackets, and mounting hardware included Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/2" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) are required to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Carpeting dimensions (per roll): 11" wide x 12' long Maximum 2x4 length for carpeting: 69" Pre-Galvanized Steel Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. Fits trailer frames up to 3" wide x 4-1/4" tall. ... Features: Bunk-style guides support your pontoon boat and keep it centered while you're loading it onto your trailer Adjustable height provides a good fit for your boat Boards can be installed higher or lower along the posts Support posts clamp onto the top of your channel, box-beam, or I-beam trailer frame Mounting brackets allow you to adjust the distance between posts Galvanized steel construction is sturdy and resists corrosion Hardware included Marine-grade-carpeted boards won't scratch your boat Made in the USA Specs: Quantity: 2 bunk-style pontoon boat guides Application: pontoon boat trailer frames up to 3" wide x 4-1/4" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) can be used to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Bunk board dimensions (each): 24" long x 4" wide x 2" deep Post dimensions: 23" tall x 1-1/2" wide Mounting area is 9-1/2" long Adjustable boat guides can be fine-tuned to work with your boat and your trailer.
This 2-1/2" diameter x 2" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the side guide roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: side guide roller on 1/2" diameter shaft Dimensions: 2-1/2" diameter x 2" wide Inner diameter of end cap: 0.610" Endcaps easily install on the same brackets that your side guide rollers are mounted to.
This 2" diameter x 1-3/4" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the side guide roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: side guide roller on 1/2" diameter shaft Dimensions: 2" diameter x 1-3/4" wide Endcaps easily install on the same brackets that your side guide rollers are mounted to.
This 2-1/2" diameter x 2-1/2" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the side guide roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: side guide roller on 5/8" outer diameter shaft Inner diameter: 0.670 Dimensions: 2-1/2" diameter x 2-1/2" wide Endcaps easily install on the same brackets that your side guide rollers are mounted to.
Loading your fishing or jon boat at a busy ramp can be tricky, but this side guide roller helps every time. Mounted along your trailer, it gently centers your boat for smooth loading, so you can skip the struggle and get off the water faster.Spins Under Load To Guide Boat Position: Roller spins to guide boat along trailer path. Works With Standard Roller Brackets: Fits 1/2" diameter shaft mounting setups.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.Features: Bunk-style guides support your boat and keep it centered while you're loading it onto your trailer Tilt to accommodate hulls of various sizes Support posts clamp onto top or bottom of trailer frame Mounting brackets allow you to adjust the distance between posts Pre-galvanized steel construction is sturdy and resists corrosion Hardware included Marine-grade carpeting lines bunk boards to protect your boat's finish Black color carpeting Made in the USA Specs: Quantity: 2 bunk-style boat guides Application: trailer frames up to 3" wide x 4-1/4" tall 2 Extra-long U-bolt kits (CE11416; sold separately) are required for mounting on frames up to 3" wide x 5-1/4" tall Bunk board dimensions (each): 60" long x 2" wide x 4" tall Post dimensions: 18" tall x 1-1/2" wide Extends out from boat up to 13" Adjustable boat guides can be fine-tuned to work with your boat and your trailer.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.Features: Bunk-style guides support your boat and keep it centered while you're loading it onto your trailer Tilt to accommodate hulls of various sizes Support posts clamp onto top or bottom of trailer frame Mounting brackets allow you to adjust the distance between posts Pre-galvanized steel construction is sturdy and resists corrosion Hardware included Marine-grade carpeting lines bunk boards to protect your boat's finish Made in the USA Specs: Quantity: 2 bunk-style boat guides Application: trailer frames up to 3" wide x 4-1/4" tall 2 Extra-long U-bolt kits (CE11416; sold separately) are required for mounting on frames up to 3" wide x 5-1/4" tall Bunk board dimensions (each): 24" long x 2" wide x 4" tall Post dimensions: 21" tall x 1-1/2" wide Upright post angle: 75 degrees Adjustable boat guides can be fine-tuned to work with your boat and your trailer.
4" Round. Waterproof trailer light serves 3 functions: brake, tail, and turn. Smooth X-shape crosses the face of the light. Recessed mount with grommet (sold separately). Accepts 3-prong plug.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. PL-3 Wiring Connection This Light Guide light has a standard 3-prong plug as pictured above. A 3-prong pigtail (A45PB or A47PB - sold separately) is required to connect this light to your vehicle or trailer.
This 2-1/2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 5/8" diameter shaft Dimensions: 12" long x 2-1/2" diameter 12243-5 Yates 12" Molded Side Guide Roller - Black Rubber
This 2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Dimensions: 9" long x 2" diameter 9202-4 Yates 9" Molded Side Guide Roller - Black Rubber
This 2-1/2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Dimensions: 12" long x 2-1/2" diameter 12243-4P Yates 12" Molded Side Guide Roller - Black Rubber
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. Recessed mount with grommet (sold separately). Accepts 2-prong plug.You will also need a plastic grommet (A70GB - sold separately) to install your tail light. An optional mounting bracket is also available (BK70BB - sold separately) to make it easier to mount the light on your trailer. Recessed-Mount Light Recessed-mount trailer lights install underneath a housing or a grommet, which is often sold separately.
This 2" diameter roller replaces one of your boat trailer's guide rollers. Made of durable rubber material.Features: Replaces 1 side guide roller on your boat trailer (sold separately) Eases loading and unloading of boat by helping to guide the boat into place Mounts along the side of your trailer Constructed of heavy-duty rubber Made in the USA Specs: Application: bracket with 1/2" shaft Dimensions: 9" long x 2" diameter
This 2-1/2" diameter roller replaces one of your boat trailer's guide rollers. Made of durable rubber material.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat by helping to guide the boat into place Mounts along the side of your trailer Constructed of heavy-duty rubber Made in the USA Specs: Application: bracket with 1/2" shaft Dimensions: 12" long x 2-1/2" diameter
Buying wrap by the roll? These 2x4 endcaps finish off your bunks with a clean look. Includes 24 black caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.
This bolster bracket supports your pontoon boat trailer's bunks. Constructed of corrosion-resistant galvanized steel with a sturdy base, it helps you to properly align your 6" or 8" wide bunk boards on your trailer.Features: Heavy-duty bracket mounts to your pontoon boat trailer's frame or crossmembers and allows you to mount 2 bunk boards Stabilizes bunk boards when 2 brackets are used (other bracket sold separately) Does not include mounting hardware Wide base provides a strong mounting platform Slotted mounting hole allows for adjustment during installation 1/8" Thick, galvanized steel construction is sturdy and resists corrosion Made in USA Specs: Quantity: 1 bracket Application: 6" and 8" wide bunk boards Dimensions: 15-1/2" long x 3" wide x 6" tall Mounting slot dimensions: 7-1/2" long x 1/2" wide This bracket holds two 2"x6" or 2"x8" bunk boards angled toward each other to provide support for one of the boat's pontoons.
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. Ezi-Guides help you avoid loading your boat off the rollers and damaging it.Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 20' - 28' long
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. Ezi-Guides help you avoid loading your boat off the rollers and damaging it.Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 16' - 20' long and sailboats 20' - 28' long Overall height: 15"
Filters
