Replace the damaged or worn-out side latch on either side of your utility trailer's gate with this sturdy steel latch. Zinc-plated steel is durable and resists corrosion.Features: Latch replaces the damaged or worn-out latch on the side of your utility trailer gate Can be installed on the right or left side of your trailer Zinc-plated, 8-gauge steel is durable and resists corrosion Made in the USA Specs: Pin diameter: 1/2" Distance between mounting holes (center to center): 2-1/8"
Replace the damaged or worn-out corner latch on either side of your utility trailer's gate with this sturdy steel latch. Zinc-plated steel is durable and resists corrosion.Features: Latch replaces the damaged or worn-out latch on the corner of your utility trailer gate Can be installed on the right or left side of your trailer Zinc-plated, 8-gauge steel is durable and resists corrosion Made in the USA Specs: Pin diameter: 1/2" Distance between mounting holes (center to center): 2-1/8"
Spring latch is ideal for securing trailer tailgates, ramps, and other doors. Holdback lets you secure the latch in the open position. Cone-shaped pin lets you ease the pin into a keeper, even if it's not perfectly aligned.
Stow the ball and mounting platform on this dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Designed for use with your GM MultiPro tailgate. Tow up to 10,000 lbs.Features: Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Angled design offers clearance for the inner-gate and step feature of your GM MultiPro tailgate Stowable design lets you store ball and mounting platform underneath your vehicle Remove pins holding ball mount platform in place on shank Flip platform underneath the hitch Reinsert pins and clips to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount up or down along shank and secure in place with included pins and clips Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch No additional locks required to prevent platform and balls from being removed 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pin, rotate balls, and reinsert pin Dual-process chrome plating on balls provides excellent rust resistance Black powder coated shank is corrosion resistant Stainless steel pins create sturdy, rust-resistant connections Durable steel construction with high yield tubing offers superior strength Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Dual ball sizes: 2" and 2-5/16" Towing weight capacity: 10,000 lbs Tongue weight: 1,000 lbs Maximum drop: 2-1/2" Maximum rise: 3-1/2" Limited lifetime warranty Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
Stow the ball and mounting platform on this dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Designed for use with your GM MultiPro tailgate. Tow up to 18,000 lbs.Features: Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Angled design offers clearance for the inner-gate and step feature of your GM MultiPro tailgate Stowable design lets you store ball and mounting platform underneath your vehicle Remove pins holding ball mount platform in place on shank Flip platform underneath the hitch Reinsert pins and clips to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount up or down along shank and secure in place with included pins and clips Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch No additional locks required to prevent platform and balls from being removed 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pin, rotate balls, and reinsert pin Dual-process chrome plating on balls provides excellent rust resistance Black powder coated shank is corrosion resistant Stainless steel pins create sturdy, rust-resistant connections Durable steel construction with high yield tubing offers superior strength Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: When used with 2" ball: 7,500 lbs When used with 2-5/16" ball: 18,000 lbs Maximum drop: 7" Maximum rise: 7-1/2" Distance from the center of hitch pin hole to the center of hitch ball: 9" Incremental height adjustment: 1-3/8" Limited lifetime warranty Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Designed for use with your GM MultiPro tailgate. Tow up to 10,000 lbs.Features: Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Angled design offers clearance for the inner-gate and step feature of your GM MultiPro tailgate Stowable design lets you store ball and mounting platform underneath your vehicle Remove pins holding ball mount platform in place on shank Flip platform underneath the hitch Reinsert pins and clips to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount up or down along shank and secure in place with included pins and clips Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch No additional locks required to prevent platform and balls from being removed 3 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pin, rotate balls, and reinsert pin Dual-process chrome plating on balls provides excellent rust resistance Black powder coated shank is corrosion resistant Stainless steel pins create sturdy, rust-resistant connections Durable steel construction with high yield tubing offers superior strength Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Tri-ball sizes: 1-7/8", 2" and 2-5/16" Towing weight capacity: 1-7/8" Ball: 3,500 lbs 2" Ball: 7,500 lbs 2-5/16" Ball: 10,000 lbs Tongue weight: 1,000 lbs Maximum drop: 2-1/2" Maximum rise: 3-1/2" Limited lifetime warranty Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
Cam-action door latch is ideal for your trailer's side door or fold-down gate. 12-1/2" Double-action handle protects against jarring while driving. Non-removable pin helps keep your cargo secure. 3/4" Diameter pipe is not included.Features: Cam-action door latch is ideal for side doors on utility trailers or fold-down trailer gates Pairs with 3/4" diameter pipe (not included) Bridge-type hasp helps prevent accidental opening and ensures safe latching action Can be locked with padlock (sold separately) Narrow, wraparound keepers are ideal for rear door or side door applications Double-action handle assembly ensures simple, secure latching and helps protect against in-transit jarring Flip the handle keeper on the hasp latch up and lift the handle to release Rotate the handle to either release or engage the cams Non-removable pins ensure maximum security to keep your cargo safe Helps prevent tampering and removal of door Reversible design allows the latch to be used on left-hand or right-hand doors Zinc-plated steel construction is corrosion resistant Black vinyl handle provides a smooth and comfortable grip Simple bolt-on installation Mounting hardware not included Made in the USA Specs: Handle length: 12-1/2" Distance between mounting holes on hasp (center to center): 4" Distance between mounting holes on hinges (center to center): 3-1/4" Mounting hole diameter (on hinges and hasp): 1/2" Note: Schedule 40 3/4" plumbers pipe needs to be welded to the cam ends as well as the handle for complete installation.
Great for agricultural and construction equipment, this steel piano hinge provides uninterrupted support for your door or gate. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
This edge glide gives you a smooth transition from the ground onto your trailer gate. The glide minimizes friction for snowmobiles but has built-in traction so you can still walk on it safely or load up your favorite off-road toy.
This gravity-fed tailgate spreader has a powered spinner to help de-ice driveways and small strip mall parking lots. 9" Diameter spinner casts rock salt up to 24'. Tilt hopper down to access the back of your Jeep, SUV, or truck.To protect the contents inside the hopper, put on the lid and secure it in place using the cover latches. Open the manual feed gate - located between the chute and spinner - to start the flow of salt. The slanted walls in the hopper channel the material down the chute, using gravity to feed the spinner.
Carry longer loads or create a wheel chock for your dirt bike with these tailgate adjusters. Durable, stainless steel bars replace factory cables and allow you to adjust your tailgate to 8 different angles. Easy installation - no drilling required.This tool also is helpful for other situations where you can't easily release the pins by hand.
Great for agricultural and construction equipment, this steel piano hinge provides uninterrupted support for your door or gate. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
Heavy-duty steel hinge with brass bushing provides a support point for mounting a metal door or gate. Grease fitting allows for easy lubrication. Weld-on installation with metal surfaces.Features: Hinge provides support along the length of your metal door or gate Also great for trailers, BBQ pits, electrical boxes, and machinery doors Weld-on design ensures strongest hold for heavy-duty, permanent applications Grease fitting makes lubricating hinge easy Durable steel construction with corrosion-resistant brass bushing Weld-on installation with metal surfaces Specs: Overall dimensions: 10-1/4" long x 1-1/2" thick Overall diameter: 1-1/8" Pin diameter: 3/4" (19 mm)
Great for agricultural and construction equipment, this piano hinge provides uninterrupted support for your door or gate. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
This edge glide gives you a smooth transition from the ground onto your trailer gate. The glide minimizes friction for snowmobiles but has built-in traction so you can still walk on it safely or load up your favorite off-road toy.
Upgrade or replace a damaged hinge on your dump trailer's access door or barn door-style gates with this heavy-duty hinge. Raw finish makes it easy to weld. Grease zerk fitting lets you easily grease pin for smooth and long-lasting operation.
This bullet hinge is perfect for metal gates and doors, welding on easily and able to support heavy loads. It's made of stainless steel to resist corrosion, and the bushing keeps the hinge working smoothly.
Heavy-duty steel hinge with brass bushing provides a support point for mounting a metal door or gate. Grease fitting allows for easy lubrication. Weld-on installation with metal surfaces.Features: Hinge provides support along the length of your metal door or gate Also great for trailers, BBQ pits, electrical boxes, and machinery doors Weld-on design ensures strongest hold for heavy-duty, permanent applications Grease fitting makes lubricating hinge easy Durable steel construction with corrosion-resistant brass bushing Weld-on installation with metal surfaces Specs: Overall dimensions: 5-15/16" long x 1" thick Overall diameter: 3/4" Pin diameter: 1/2" (12.7 mm)
Heavy-duty steel hinge with brass bushing provides a support point for mounting a metal door or gate. Grease fitting allows for easy lubrication. Weld-on installation with metal surfaces.Features: Hinge provides support along the length of your metal door or gate Also great for trailers, BBQ pits, electrical boxes, and machinery doors Weld-on design ensures strongest hold for heavy-duty, permanent applications Grease fitting makes lubricating hinge easy Durable steel construction with corrosion-resistant brass bushing Weld-on installation with metal surfaces Specs: Overall dimensions: 4-3/4" long x 3/4" thick Overall diameter: 5/8" Pin diameter: 3/8" (10 mm)
This edge glide gives you a smooth transition from the ground onto your trailer gate. The glide minimizes friction for snowmobiles but has built-in traction so you can still walk on it safely or load up your favorite off-road toy.
Cam-action door latch is ideal for your trailer's side door or fold-down gate. 12-1/2" Double-action handle protects against jarring while driving. Non-removable pin helps keep your cargo secure. 3/4" Diameter pipe is not included.Features: Cam-action door latch is ideal for side doors on utility trailers or fold-down trailer gates Pairs with 3/4" diameter pipe (not included) Bridge-type hasp helps prevent accidental opening and ensures safe latching action Can be locked with padlock (sold separately) Narrow, wraparound keepers are ideal for rear door or side door applications Double-action handle assembly ensures simple, secure latching and helps protect against in-transit jarring Flip the handle keeper on the hasp up and lift the handle Rotate the handle to either release or engage the cams Non-removable pins ensure maximum security to keep your cargo safe Helps prevent tampering and removal of door Reversible design allows the latch to be used on left-hand or right-hand doors Stainless steel construction is rustproof and corrosion resistant Black vinyl handle provides a smooth and comfortable grip Simple bolt-on installation Mounting hardware not included Made in the USA Specs: Handle length: 12-1/2" Distance between mounting holes on hasp (center to center): 4" Distance between mounting holes on hinges (center to center): 3-1/4" Mounting hole diameter (on hinges and hasp): 1/2" Note: Schedule 40 3/4" plumbers pipe needs to be welded to the cam ends as well as the handle for complete installation.
Heavy-duty steel hinge with brass bushing provides a support point for mounting a metal door or gate. Grease fitting allows for easy lubrication. Weld-on installation with metal surfaces.Features: Hinge provides support along the length of your metal door or gate Also great for trailers, BBQ pits, electrical boxes, and machinery doors Weld-on design ensures strongest hold for heavy-duty, permanent applications Grease fitting makes lubricating hinge easy Durable steel construction with corrosion-resistant brass bushing Weld-on installation with metal surfaces Specs: Overall dimensions: 7-7/8" long x 1-1/8" thick Overall diameter: 15/16" Pin diameter: 5/8" (16 mm)
Rustproof cam-action door latch is ideal for large enclosed trailers. Can be installed on doors with up to a 3/4" offset. 14" Double-action handle protects against jarring while driving. 3/4" Diameter pipe not included.
Heavy-duty steel hinge with brass bushing provides a support point for mounting a metal door or gate. Grease fitting allows for easy lubrication. Weld-on installation with metal surfaces.Features: Hinge provides support along the length of your metal door or gate Also great for trailers, BBQ pits, electrical boxes, and machinery doors Weld-on design ensures strongest hold for heavy-duty, permanent applications Grease fitting makes lubricating hinge easy Durable steel construction with corrosion-resistant brass bushing Weld-on installation with metal surfaces Specs: Overall dimensions: 3-15/16" long x 3/4" thick Overall diameter: 5/8" Pin diameter: 5/16" (8 mm)
Filters
