Step on the dual-pin foot lever on this heavy-duty jack to use the drop leg hands-free - makes up half the total travel. Best for gooseneck setups where you can step between the truck and trailer. ... Features: Easy-to-use foot lever faces the front - no more bending, squatting, or muddy knees Use the drop leg completely hands-free Drop leg extension makes up about half of the total travel Works best if you have open space between your trailer and your truck Heavy-duty internal components Durable jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Black powder coated finish on inner and outer tubes Footplate minimizes sinking in soft ground Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes footplate, handle, and connecting pin Specs: Lift capacity: 12,000 lbs Support capacity : 20,000 lbs Lift: 13-1/2" Drop leg adjustment: 13" Total adjustment: 26-1/2" Overall height (from bottom of foot to top of jack): Retracted: 29-1/2" Extended: 56" Outer tube width: 4-3/8" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 2-1/2" on center Jack screw diameter: 1-1/4" 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Weld-on, pipe-mount swivel jack pivots up for travel. Square design provides solid side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". Drop leg adds 13-1/2" of manual adjustment to 15" of lift.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Belly band welded to the outer tube provides extra strength Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-1/2" Extended Lift: 15" Drop leg adjustment: 13-1/2" Total adjustment: 28-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Included weld-on pipe mount lets you pivot the jack up for travel and down for use. Retracted height is 14-1/2". Extended height is 29-7/8". The drop leg adds 13-1/2" of manual adjustment to 15-3/8" of lift.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-7/8" Extended Lift: 15-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 28-7/8" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 5-7/8" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 15-3/4" and an extended height of 31". Mating mount is included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Pipe mount (included) is required for installation Specs: Bracket height (from bottom of foot to center of pipe mount): 15-3/4" Retracted 31" Extended Lift: 15-1/4" Clearance: 8-1/2" from center of pipe mount to top of jack Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Pipe mount pin hole diameter: 5/8" Handle radius: 8-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 14-7/8" and an extended height of 30-3/8". Mating mount sold separately.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Specs: Bracket height (from bottom of foot to center of pipe mount): 14-7/8" Retracted 30-3/8" Extended Lift: 15-1/2" Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
This 5,000-lb A-frame trailer jack provides 15" of lift for easier hitching and uncoupling. Ergonomic top-wind handle offers comfortable operation. Carbon steel construction is finished with corrosion-resistant black powder coat and zinc.Features: 5,000-lb lift capacity supports utility, cargo, RV, and equipment trailers 15" lift makes hitching and uncoupling easier by raising and lowering your trailer Ergonomic top-wind handle provides comfortable manual operation Bolt-on design fits standard A-frame trailer couplers Black powder coat and zinc finishes help resist corrosion for long-lasting durability Carbon steel construction provides strength for demanding towing applications Includes support foot for stable positioning on a variety of surfaces Specs: Lift capacity: 5,000 lbs Lift: 15" Mount type: A-frame Operation: topwind manual crank Installation: bolt-on Outer tube diameter: 2-1/4" Material: carbon steel Finish: black powder coat and zinc Foot: included Warranty: 1-year
... Its ergonomic top-wind handle offers comfortable operation, and the included foot provides stable support on a variety of surfaces.Features: 2,000-lb lift capacity supports utility, cargo, and recreational trailers 15" lift makes hitching and uncoupling easier by raising and lowering your trailer Ergonomic top-wind handle provides comfortable manual operation Bolt-on design fits standard A-frame trailer couplers Black powder coat and zinc finishes help resist corrosion for long-lasting durability Carbon steel construction provides strength for everyday towing applications Includes support foot for stable positioning on a variety of surfaces Specs: Lift capacity: 2,000 lbs Lift: 15" Mount type: A-frame Operation: topwind manual crank Installation: bolt-on Material: carbon steel Finish: black powder coat and zinc Foot: included
This replacement foot for your Thule Rapid Aero Crossroad roof-rack-railing foot pack attaches around your factory railings to create a roof-rack base for Thule square load bars.Features: Replaces 1 foot for your Thule Rapid Aero Crossroad roof-railing-mounted system Mounts directly to your factory roof railings with integrated strap Creates roof-rack system for use with Thule Rapid Aero or AeroBlade load bars Specs: Application: Thule Rapid Aero Crossroad Roof-Rack-Railing Foot Pack (TH450R)
Replacement foot for the Thule Rapid Podium roof-rack system mounts to a factory-fixed mounting point.Features: Replaces 1 foot for Thule Rapid Podium foot pack (TH460R) Mounts to factory-fixed mounting point on the roof of your vehicle
This replacement naked foot for the Thule Rapid Aero roof-mounted foot pack creates the base of your entire rack system. The foot is constructed of corrosion-resistant, galvanized steel. ... Features: Replaces 1 foot for the Thule Rapid Aero roof-mounted foot pack Outer plastic cover sold separately (853-6396-03) Creates partial base for your entire roof-rack system Constructed of corrosion-resistant, galvanized steel Specs: Application: Thule Rapid Aero Roof-Mounted Foot Pack (TH400XTR)
Replaces the 2" x 2" drop leg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. Designed for TJD-7000 Series jacks.Features: Replaces the drop leg and foot from your etrailer or Ram square, direct-weld jack with a 7,000-lb capacity Designed for use with TJD-7000 Series jacks Offers an additional 13-1/2" of travel Durable zinc finish resists corrosion Specs: Tubing dimensions: 2" x 2" Footplate dimensions: 8" long x 6" wide Distance between adjustement pin holes center to center: 3-3/8" Overall height: 17-3/4"
Replaces the foot for your etrailer or Ram electric jack (EJ-3520-BBX or EJ-3520-WBX).Features: Replaces the foot for your etrailer or Ram electric jack (EJ-3520-BBX or EJ-3520-WBX) Quantity: 1 replacement foot
You pull in after a long drive, the ground looks fine, and you don't want to wonder if the jack will sink or a block will shift once everyone steps inside. This kit puts a wide drop leg and SnapPad under your jack, giving it a solid, steady base.Highlights Stops the Jack from Sinking: Large 6" foot spreads the load across dirt or grass for even weight distribution. Steadier When Parked: Wide foot and included SnapPad create a wider 7-1/4" base when people walk inside.
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 11-1/2" and 12" round jack foot.Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 11-1/2" or 12" round jack foot Diameter: 13-3/4" Weight: 8.4 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 9" round jack foot.Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 9" round jack foot Diameter: 11" Weight: 5 lbs 2-Year limited warranty
Filters
