Complete the factory prep package on your 2021 or newer Freightliner chassis motorhome so you can flattow your vehicle with the Air Force One supplemental braking system. ... To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Complete the factory prep package on your 2020 and newer Tiffin chassis motorhome so you can flattow your vehicle with the Air Force One supplemental braking system. ... To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Complete the Safe Haul factory prep package on your 2019 or newer Spartan motorhome so you can flattow your vehicle with the Air Force One supplemental braking system. Includes an air jumper hose with the Safe Haul-specific fitting.To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent damage from electrical feedback. Connects RV and towed car with 4-pole flat plugs. Includes installation hardware.Features: Carries your RV's tail, brake, and turn signals to your towed car Prevents feedback that can damage your vehicle's electrical components with diodes Includes: 4 Hy-Power diodes (2) 4-Wire harnesses with 4-pole flat connectors Butt connectors, 1 ring terminal, zip ties, and plastic loom Specs: Max amperage: 85 amps Max voltage: 24 volts Power cord: 6' long 4-Wire harness: 30' long Plastic loom: 3' long Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flattow brake system.
Get a head-start on wiring your towed car before you even get the installation started. This kit comes with butt connectors pre-installed and ready to splice into your wiring. ... Features: Connects your RV's tail, brake, and turn signal lights to your towed car's tail lights Plugs into your motorhome with 4-way flat connector Splices quickly into car's electrical system with included butt connectors Color-coded wires with wiring guide makes installation easier Prevents feedback that can damage your vehicle's electrical components with integrated block diodes Includes 4-wire harness, 4-flat extension cable, mounting bracket, silicone sealant, zip-ties, and installation hardware 1-Year limited warranty Do I Need a Brake Light Relay?
Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.Breakaway System The Patriot also comes with a breakaway switch, an absolute must for safe flattowing. If there's ever an emergency situation where your toad becomes detached from the motorhome, the breakaway switch will immediately activate the brakes and bring your vehicle to a stop.
Imagine prepping for your trip and having your braking system ready in less than a minute. With the RVibrake 4, the audio assistant guides you step by step, so there's no fumbling or guesswork, just a quick and reliable setup every time.It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up. To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
... Adjustable pressure setting for comfortable braking. Charges car battery while towing.Features: Get automatic braking in your towed vehicle when you press the brakes in your RV Cable pulls towed car's brake pedal smoothly down when the system activates System activates only when RV brake lights come on: no false braking Adjust braking pressure to suit the weight/size of your vehicle and avoid damage Ranges from 5 psi to 80 psi Plug-and-play System automatically turns on when connected to motorhome Components install permanently and discreetly Charge your car battery as you flattow Trickle-charges constantly Monitor your towed car's braking with LED that installs in RV's dashboard Lights up when brakes are activated Sounds alarm if the brakes stay on too long (approx. 20 seconds) Made in the USA Specs: Compatible with hybrids and other cars with continuous-power-assist brakes NOT compatible with vehicles with non-electric hydroboost braking systems Actuator box dimensions: 8-3/4" long x 8-3/4" wide x 2-3/4" tall Power draw: 6 mA - 10.8 amps Maximum braking pressure: 80 psi Limited lifetime warranty Do I Need a Braking System for FlatTowing?
... Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. ... To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
... Nice and secure, these are also the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Mounts securely with heavy-duty magnets Includes 2 lights and wiring harness with 4-way flat trailer connector Heavy-duty vinyl protects wiring from the elements Meets DOT standards Specs: Universal fit for all vehicles Wiring harness length: 20' Wire length between lights: 4-1/2' Separate wire with 4-way for tow vehicle : 3' long Bulb type: 2057 double filament 3-Year limited warranty on housing and wiring only Will These Magnetic Lights Work On My Vehicle?
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components designed to stay out of sight.To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Get safe, smooth braking for your towed car with this truly proportional braking system. Installs permanently so you can just plug and go. Low-profile design keeps it out of sight and out of the way. ... To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Extension wiring loop with 2 trailer ends lets you connect your RV and towed vehicle. Each male end easily plugs into a 4-way flat, vehicle-end plug.Features: Wiring loop lets you connect your RV to your towed vehicle Dual trailer (male) ends plug into 4-way flat vehicle ends 6' Long
Stick these bright, efficient LED lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Shines brighter and more efficiently than incandescent bulbs Lasts 50 times longer Attaches with magnets Protective label keeps the magnets from scratching your car Works year-round Lens housing is sonically sealed and waterproof Includes 2 red LED lights and wiring harness with 4-way flat trailer connector Meets DOT standards Specs: Universal fit for all vehicles Light diameter: 4-1/4" Overall dimensions: 3-7/8" long x 5-15/16" tall x 2-3/16" wide Tow light harness length: 245" Wiring length between lights: 63" Length of additional wiring harness for RV: 35" Diodes (per light): 6 Power draw at 12.8 volts Stop/turn signal light: 0.36 amps Tail light: 0.03 amps Lifetime warranty on LEDs Will These Magnetic Lights Work On My Vehicle?
Stick these magnetic lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to your car Makes your tow setup safe and legal without a permanent installation Mounts securely with heavy-duty magnets Includes 2 lights and wiring harness with 4-way flat trailer connector Heavy-duty vinyl protects wiring from the elements Meets DOT standards Specs: Universal fit for all vehicles Length of wire: Wire that connects the lights: 53-1/2" Wire that extends out the back of the light: 243" Wire with 4-pole connector: 35-1/2" Limited lifetime warranty Will These Magnetic Lights Work On My Vehicle?
... This is the easiest way to get brake and turn signals on your car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Shines brighter and more efficiently than incandescent bulbs Attaches with magnets Includes 2 red LED lights and wiring harness with 4-way flat trailer connector Specs: Light diameter: 4" Wiring harness length: 20' Operating range: 8V - 16V Limited lifetime warranty Will These Magnetic Lights Work On My Vehicle?
If you need to disconnect the battery to flattow your vehicle, you're going to want this kit. It disconnects your battery with the push of a button - much safer and faster than doing it yourself - while keeping your towing accessories charged.A charge line kit (RM-156-25 - sold separately) is recommended if you have a braking system that is using power from the towed vehicle's battery while it is disconnected.
If you need to disconnect the battery to flattow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.Features: Disconnects your battery with the turn of a knob Eliminates the inconvenience and danger of pulling your battery cable yourself Provides a positive current source for the breakaway switch and other accessories without draining the battery Includes a corrosion-resistant, marine-grade solenoid with 300-amp constant duty and 1000-amp surge Comes pre-assembled for easy installation While primarily designed for use on diesel engines, this also works on 8-cylinder gas engines Specs: Application: vehicles that require the battery to be disconnected for flattowing - consult your owner's manual Works with almost any 12V battery Designed for diesel engine vehicles, but also work with gas engine vehicles Notes: Disconnecting the battery, whether manually or with this automatic disconnect, will affect your vehicle's electronics.
If you need to disconnect the battery to flattow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.Features: Disconnects your battery with the turn of a knob Eliminates the inconvenience and danger of pulling your battery cable yourself Provides a positive current source for the breakaway switch and other accessories without draining the battery Rated at 275-amp constant duty and 1250-amp surge capability Specs: Application: vehicles that require the battery to be disconnected for flattowing - consult your owner's manual Works with almost any 12V battery Designed for gas or diesel engines Notes: Disconnecting the battery, whether manually or with this automatic disconnect, will affect your vehicle's electronics.
This LED light bar plugs right into your 12V outlet and needs no hardwiring, while the transmitter plugs into your RV's 7-way socket. Uses a suction cup to attach to your car's back window.Features: Displays tail, brake, and turn signals on your towed car so you can tow safely and legally Receives tow vehicle's signals via wireless transmitter Avoids risk of electrical damage to your car Requires no hardwiring or splicing Light bar plugs into 12-volt outlet in your car Transmitter plugs into RV's 7-way Mounts to your vehicle's rear window with a strong suction cup Includes light bar, transmitter and receiver kit, and mounting kit Made in the USA Specs: Universal fit for all vehicles Requires 12-volt accessory outlet Cord length: 11-1/2' Light bar length: 17" Note: If you have to disconnect your vehicle's battery in order to flattow, use kit DM83FR (sold separately) to get power to your 12-volt outlet.
If you want to flattow your vehicle with animated rear lights and have to use a battery bypass, use this kit to connect power and signal from your motorhome or tow rig. ... Features: Kit for animated tail lights is used in conjunction with other parts and systems required for a flattow set-up Allows you to bypass your battery during flattowing Lead can be wired in at the 6-way receiver to the plug from your motorhome or tow rig Can also be run off a lead from a battery charge line kit Quality wire, fittings, and a braided sleeve to protect the wiring and your vehicle Includes: 26' Wiring harness (6) 6-amp diodes Spade connectors, butt connector, ring terminal, and self-tapping screw Specs: Application: vehicles featuring progressive/animated lights that require the battery to be disconnected for flattowing - consult your owner's manual 1-Year warranty
Replaces the 10-amp diode for your Demco Air Force One or Stay-IN-Play Duo supplemental braking system. Helps restore proper current flow in your flattow braking setup.Features: Replaces the 10-amp diode for your Demco supplemental braking system Works with select Demco Air Force One and Stay-IN-Play Duo systems Helps maintain proper one-way current flow in your flattow braking wiring Prevents electrical backfeed through the circuit Direct replacement for a damaged, missing, or worn diode Installs in line with your existing braking-system wiring Fits: Demco Air Force One supplemental braking systems: 9599019 9599020 9599021 9599007 Demco Stay-IN-Play Duo supplemental braking systems: 9599018 9599006
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent damage from electrical feedback. Includes 7-way to 6-way coiled adapter cord and 6-way socket.Features: Complete wiring kit connects your RV's tail, brake, and turn signal lights to your towed car Diodes prevent feedback that can damage your vehicle's electrical components Protected from corrosion by powder-coated aluminum casings 7-Wire to 6-wire adapter cord runs power from RV to towed car Coiled to prevent dragging and tangling Resistant to wear and tear with durable vinyl casing 6-Way socket hardwires to towed car and mounts with included bracket Kit includes: 4 Hy-Power diodes 4-Wire harness 7-Way to 6-way coiled adapter cord 6-Way socket with mounting bracket 1 Butt connector, 1 ring terminal, split loom, and zip ties Made in the USA Specs: Diode max amperage: 85 amps Diode max voltage: 24 volts Coiled cord Max length: 8' Compressed length: 15" Wiring harness length: 27' Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flattow brake system.
Filters
