If a tire gives out on your camper, you need a jack that handles the weight. The Tallboy combines compact size with 12-ton lift capacity and provides some serious lift. And the oversized base plate helps with stability on rough ground.
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy Drop Leg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin.
The EZ Jack is an easy-to-use, safe and reliable device that functions as a jack for changing tires on dual-axle trailers. It also serves as a wheel chock or a level. ... Features: Enables you to easily change a tire on your tandem-axle trailer Heavy-duty, crescent-shaped wedge with rocker design raises trailer off the ground Serves as a wheel chock to help keep your trailer in place on inclines and most surfaces Flip over and place narrow end in front of wheel Levels out your RV when it is parked on uneven terrain Drive up onto wedge to balance out your motor home Constructed of heavy-duty, corrosion-resistant cast aluminum Made in the USA Specs: Weight capacity: 20,000 lbs Dimensions: 24" long x 6-1/8" wide x 6" tall Weight: 11 lbs Lifetime warranty The Blaylock EZ trailer jack and wheel chock makes it easy to change or service a tire on your dual-axle trailer. Simply place the wedge in front of the tire that does not need to be changed.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.On-Demand Power Connection: 7-way plug connects straight to your vehicle for simple power access. Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation.
Automatically level and stabilize your travel trailer with this electronic leveling system. 5 Precise, motorized jacks can be operated by the included control panel or via your smart device (if RV has Wi-Fi and factory-installed OneControl system).Features: Electronic leveling system lets you quickly and easily level and stabilize your travel trailer Fully electric system - no hydraulics needed Automatic extend and retract functions allow hands-free operation while jack lifts and lowers Hitch recognition automatically returns your trailer to the position at which you unhooked Wall-mount touchpad controller has easy-to-read buttons and LCD screen Handheld touchscreen remote control (LC358601) sold separately App control available on travel trailers equipped with factory-installed OneControl system and Wi-Fi Powered A-frame jack raises and lowers your trailer tongue for easy hookup LED light illuminates at a downward angle to help you focus on your coupler 4 Rear power jacks work together to perfectly level your trailer Triangular shape offers stability and support Sturdy steel construction with corrosion-resistant black powder coat finish Installation brackets and spacers are included Specs: Application: travel trailers with a GVWR up to 10,000 lbs Total travel: A-frame jack: 18" Rear jacks: 12" 1-Year limited warranty Automatic Leveling for Your Travel Trailer It's a long and difficult process to get a travel trailer level with manual jacks, chocks, and wedges.
Want to see your tongue weight at a glance instead of trying to read a tiny dial? Then get ready for this digital scale. We love pretty much everything B&W puts out, so we're really excited to get our hands on this guy too!Highlights Know Your Tongue Weight Before You Tow: Measures up to 4,000 lbs in 5 lb increments to confirm proper loading. Clear Numbers at a Glance: Backlit digital display is easy to read while lowering the jack. Accurate Where It Matters: Provides precise readings within +/-0.5% so you can trust the number. Adjusts to Different Trailers: Height adjusts in 1-1/2" increments from 19-1/2" to 27".
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.But this creates one big drawback: smooth finishes are easy to scratch, exposing the bare metal beneath and allowing rust and corrosion to take hold. So, the bright, shiny finish you see on day one might not last as long as you'd like.
Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14.5" to 16" wheels. 5 bolt pattern backing plate. Made in the USA.
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. ... On a standard drop leg jack, the release pin is tucked away under the trailer frame. The release pin on this jack is conveniently located right above the mount for easy access.
Smooth and powerful hydraulic jack lifts your heavy load without your help. Just press the button on the corded remote control to lift and lower your trailer. The large, pivoting foot pad stabilizes the jack even on rough terrain.Features: Hydraulic jack Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Smooth and effortless operation, even for heavy loads Self-contained pump and power unit comes attached to the jack Convenient corded remote control switch Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs 500W 12V DC dual motor Reservoir capacity: 2.5 quarts Maximum pump load: 3,000 psi Working pressure: 1,500 psi Mounting tabs: 7-1/2" x 4" Foot pad: 10" long x 10" wide 1-Year warranty
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy Drop Leg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set up your camper at night Also ease weight distribution hookup and disconnect Bubble level on top of housing helps you level your trailer Bull's-eye design shows front to back and side to side Drop leg allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist fading Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on installation for A-frame trailers 3 Star washers included for making a good ground from jack to trailer Mounting hardware sold separately Specs: Bracket height: 9-1/2" Retracted 27-1/2" Extended Total lift: 23" Travel: 18" Drop leg: 5" Lift capacity: 5,000 lbs Outer tube diameter: 2-3/16" Inner tube diameter: 1-15/16" Footplate diameter: 5-1/2" Power wire: 10 gauge Motor draws 30 amps under load 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.Foot Plate Stays Stable: Keeps your trailer steady on gravel, grass, or sand. Features to know about Easy Setup, Anytime You remember all those mornings spent fighting with a manual jack, hands sore and energy running low before the day even started?
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.But this creates one big drawback: smooth finishes are easy to scratch, exposing the bare metal beneath and allowing rust and corrosion to take hold. So, the bright, shiny finish you see on day one might not last as long as you'd like.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames 2" to 4" tall Lift capacity: 1,000 lbs Bracket height: Retracted: 13-1/2" Extended: 23-1/2" Screw travel : 10" Outer tube diameter: 2" Inner tube diameter: 1-3/4" Wheel dimensions: 5-3/4" diameter x 2" wide Handle radius: 7" 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 12" x 2" Assemblies fit 14.5" to 16" wheels. Made in the USA.Ready to Roll When You Are If you're looking to customize your off-road trailer or pop-up camper, these brakes can be a great way to do that. Installing these brakes is easy, and using them is even easier. Run the linkage cable from your tongue-mounted handbrake (not included) to the lever on the backing plate of the assembly as shown above.
You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.Heavy Lifting with Full Range Travel The trailer's packed and you want to get hooked up fast. This jack is built for it. With a strong static rating and lift capacity, it handles the weight without a fight. The gears give you smooth, steady cranking, and the combined lift and drop leg travel makes it easy to level out or connect to a taller coupler without extra blocks or guesswork.
Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. Clear zinc finish resists rust.Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames up to 5" tall x 3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mounting bracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Creates a stylish flair with the spoked wheel Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailers frames 2" to 4" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 13" Extended: 23" Screw travel : 11" Inner tube diameter: 2" Outer tube diameter: 2-1/4" Handle radius: 6-1/4" Wheel dimensions: 7-5/8" diameter x 2-1/16" wide 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
What folds flat like a pancake for easy storage, unfolds in seconds, and comes with a carry bag for easy transport? The Flap Jack! These durable jack blocks provides a stable base for your trailer, RV, or camper, making setup quick and hassle-free.Ideal for Multi-Point Setups Whether you're leveling a large trailer, stabilizing multiple jacks, or just want extra flexibility, this 4 pack has you covered. 2 Convenient carry bags make it easy to transport and store everything - no loose parts, no mess.
This fast electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. Offers 26" of total lift. Extends 6" in 18.4 seconds with 1,000 lbs of tongue weight.Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Efficient ball screw makes it fast and easy to position your trailer Ball bearings roll along sturdy, threaded steel rod Powered drive provides quiet operation and eliminates the need for hand cranking Easy-to-access on/off and retract/extend buttons make for simple operation Buttons on front panel will not break off like standard toggle switches Wireless capability - operate jack with included remote control key fob Hitch memory function stores hitch height and weight distribution system height to make hooking up simple Automatically returns your trailer to the position at which you unhooked LED courtesy light on front of jack allows for simple nighttime setup Durable powder coat finish resists corrosion Emergency override allows manual operation in case of power failure Included adapter allows you to easily use your drill to raise and lower the jack Manual crank handle not included Bolt-on installation Specs: Bracket height: Retracted: 10-1/2" Total lift: 26" Screw travel: 21" Drop leg travel: 5" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 18.4 seconds Retracts 6" in 18.7 seconds Lift capacity: 5,500 lbs Outer tube diameter: 2-1/4" Footplate diameter: 7" Motor attributes: 12 Volt 2-Year warranty 10-Year warranty when registered within 90 days How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Filters
