These stainless-steel-wrapped hoses with a 135-degree bend take the hassle out of inflating and checking the air pressure of dual tires. Kit is designed for steel or aluminum rear wheels with wheel liners. Hardware included.And the stainless steel wrapping on the hoses helps prevent them from cracking or leaking. Hub-Mount Installation The dually inflation kit is designed for steel or aluminum rear wheels with wheel liners. Install 2 of the included brackets on the hub of each outer wheel.
Stainless-steel-wrapped hoses take the hassle out of inflating and checking the air pressure of dual tires. Kit is designed for steel rear wheels with wheel covers. Hardware included.The kit also includes two 45-degree-angled valve extenders to make checking and airing up your front tires even easier. Wheel-Cover-Mount Installation The dually inflation kit easily mounts to the rear wheel covers on your truck. Mount the brackets and hoses of the inflation kit to your vehicle's rear wheels before installing the wheel covers.
Stainless-steel-wrapped hoses take the hassle out of inflating and checking the air pressure of dual tires. Kit is designed for steel or aluminum rear wheels with wheel liners. Hardware included.And the stainless steel wrapping on the hoses helps prevent them from cracking or leaking. Hub-Mount Installation The dually inflation kit is designed for steel or aluminum rear wheels with wheel liners. Install 2 of the included brackets on the hubs of each outer wheel.
Stainless-steel-wrapped hoses take the hassle out of inflating and checking the air pressure of dual tires. Kit is designed for steel or aluminum rear wheels with wheel liners. Hardware included.And the stainless steel wrapping on the hoses helps prevent them from cracking or leaking. Hub-Mount Installation The dually inflation kit is designed for steel or aluminum rear wheels with wheel liners. Install 2 of the included brackets on the hub of each outer wheel.
Stainless-steel-wrapped hoses take the hassle out of inflating and checking the air pressure of inner tires on dual wheels. Kit is designed for steel or aluminum rear wheels with wheel liners. Hardware included.And the stainless steel wrapping on the hoses helps prevent them from cracking or leaking. Hub-Mount Installation The dually inflation kit is designed for steel or aluminum rear wheels with wheel liners. Install the 2 included brackets on the hub of each inner wheel.
Rubber hoses take the hassle out of inflating and checking the air pressure of dual tires. Kit is designed for steel wheels with wheel covers. Hardware included.Features: Inflation kit lets you easily check air pressure and inflate your vehicle's dually tires Relocates inner tire's valve stem to outer wheel and extends valve stem on outer tire No crawling on the ground or reaching for valve stem on inner tire 2-Ply rubber tubing with nylon braiding Simple wheel-cover-mount installation with included hardware Hoses attach to valve stems on inner and outer tires Brackets clamp to sides of wheel covers Brackets clamp to sides of rear wheels before wheel covers are installed 4 Hoses for dually tires and (2) 45-degree valve extenders for front tires included Made in the USA Specs: Application: inner and outer tires on 16", 16-1/2" and 19-1/2" dual wheels 1-Year warranty Checking and maintaining proper tire pressure is important for ensuring a safe, smooth ride and maximizing fuel economy, but it can be a real pain with dually tires.
Rubber hoses take the hassle out of inflating and checking the air pressure of dual tires. Kit is designed for steel or aluminum rear wheels with wheel liners. Hardware included.Two 90-degree hoses are also included to make it easier to access the valve stems of the outer tires. Hub-Mount Installation The dually inflation kit is designed for steel or aluminum rear wheels with wheel liners. Install 2 of the included brackets on the hub of each outer wheel.
Rubber hoses take the hassle out of inflating and checking the air pressure of inner tires on dual wheels. Kit is designed for steel rear wheels without wheel liners or covers. Hardware included.Features: Inflation kit lets you easily check air pressure and inflate inner tires on your vehicle's duallywheels Relocates inner tire's valve stem to outer wheel No crawling on the ground or reaching for valve stem on inner tire 2-Ply rubber tubing with nylon braiding Simple hand-hole-mount installation with included hardware Hoses attach to valve stems on inner tires Brackets mount on steel rear wheels without wheel covers or wheel liners 2 Hoses included Made in the USA Specs: Application: inner tires on 16", 16-1/2" and 19-1/2" dual wheels 1-Year warranty Checking and maintaining proper tire pressure is important for ensuring a safe, smooth ride and maximizing fuel economy, but it can be a real pain with dually tires.
Carry a spare tire for your truck, van, or SUV while still using your hitch for mounting accessories. The sturdy Roadmaster spare tire carrier holds all wheels with a lug nut circle up to 7", including dually and deep dish style.Features: Sturdy spare tire carrier holds a spare tire for your truck, van, or SUV 2" Receiver hitch allows you to simultaneously connect a tow bar, bike rack, or other hitch-mounted accessory Carrier designed to work with dually and deep dish offset style wheels Carrier pivots down to the ground for ease of use and access to rear compartments or engine Spring-loaded handle makes it easy to pivot carrier down and secure it back in place 2 Separate pin holes let you change the length of the shank Built-in safety cable connection tabs allow for quick hook-up and release Anti-rattle hitch pin secures carrier to RV's hitch and helps to eliminate rattle and play in the connection Black powder coated steel is durable and corrosion resistant Specs: Application: 2" x 2" trailer hitch receivers Maximum 10" spacing between rear of RV and hitch pin hole Fits 16" - 24-1/2" wheels Compatible with all wheel bolt hole patterns Receiver opening of carrier: 2" x 2" Maximum flat towing capacity: 10,000 lbs Maximum tongue weight : 400 lbs Overall dimensions: Extended: 70-1/2" tall from inside top edge of receiver tube on RV to top of handle Retracted: 42-1/2" tall from inside top edge of receiver tube on RV to top of handle Limited Lifetime Warranty Notes: This Roadmaster spare tire carrier is only to be used for flat towing a vehicle or carrying a hitch-mounted accessory, such as a bike rack or a cargo carrier.
Rubber hoses take the hassle out of inflating and checking the air pressure of inner tires on dual wheels. Kit is designed for steel or aluminum rear wheels with wheel liners. Hardware included.And the stainless steel wrapping on the hoses helps prevent them from cracking or leaking. Hub-Mount Installation The dually inflation kit is designed for steel or aluminum rear wheels with wheel liners. Install the 2 included brackets on the hub of each inner wheel.
16" x 6" Hub-piloted wheel has a 4.88" pilot diameter. ±5.35" Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup. Acrylic enamel finish resists damage better than powder coat finishes.Features: Heavy-duty wheel is designed for use on dually trucks, buses, and trailers Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup Sturdy steel wheel has 4 hand holes Silver acrylic enamel finish resists chipping and other damage better than powder coat finishes Finish is applied after a zinc phosphate pre-treatment and covers an e-coat primer layer Excellent corrosion resistance with a salt spray rating of more than 1,000 hours Center disc is spun-formed from fine-grained steel and welded into place for strength and durability Hub-piloted wheel requires the use of flange nuts (sold separately) Metal valve stem is included Wheel meets SAE J1204 standards Specs: Rim dimensions: 16" diameter x 6" wide Bolt pattern: 8 on 6-1/2" Flange nut size: 5/8"-18 Capacity: 3,890 lbs Pilot diameter: 4.88" Offset: ±5.35" 2-Year limited warranty Built-In Offset for Dual Applications This wheel is designed to be used in dual-wheel setups.
Braided steel hoses take the hassle out of inflating and checking the air pressure of the tires on dual wheels. Kit is designed for rear wheels. Hardware included.Features: Inflation kit lets you easily check air pressure and inflate your vehicle's dually tires Relocates inner tire's valve stem to outer wheel and extends valve stem on outer tire No crawling on the ground or reaching for valve stem on inner tire Braided steel construction prevents hose from cracking or leaking Simple hub mount installation with included hardware Hoses attach to valve stems on inner and outer tires Brackets mount on hub of rear wheels Includes 4 hoses and hardware Specs: Application: Inner and outer tires on 16" to 19-1/2" dual wheels Hose length: Straight hose: 13" 90-Degree hose: 9-7/16" 3-Year warranty
Get excellent traction in extreme conditions. Grooved links and ladder pattern provide traction for your dually truck in snow, ice, and mud. Reversible design allows for wear on either side for longer-lasting chains. Cams allow easy tensioning.These pewag ladder-patterned chains are great winter weather chains for your dually truck. Not only do the grooved square links dig into deep snow and ice better than rounded or standard square links, but the reversible design of these chains also allows them to wear under standard use much longer than other chains.
Get excellent traction in extreme conditions. Grooved links and ladder pattern provide traction for your dually truck in snow, ice, and mud. Reversible design allows for wear on either side for longer-lasting chains. Cams allow easy tensioning.These pewag ladder-patterned chains are great winter weather chains for your dually truck. Not only do the grooved square links dig into deep snow and ice better than rounded or standard square links, but the reversible design of these chains also allows them to wear under standard use much longer than other chains.
16" x 6" Hub-piloted wheel has a 4.77" pilot diameter hole. ±5.35" Offset allows wheel to be used as the inner or outer wheel of a dual-wheel setup. Acrylic enamel finish resists damage better than powder coat finishes.Features: Heavy-duty wheel is designed for use on dually trucks, buses, and trailers Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup Sturdy steel wheel has 4 hand holes Silver acrylic enamel finish resists chipping and other damage better than powder coat finishes Finish is applied after a zinc phosphate pre-treatment and covers an e-coat primer layer Excellent corrosion resistance with a salt spray rating of more than 1,000 hours Center disc is spun-formed from fine-grained steel and welded into place for strength and durability Hub-piloted wheel requires the use of flange nuts (sold separately) Metal valve stem is included Wheel meets SAE J1204 standards Specs: Rim dimensions: 16" diameter x 6" wide Bolt pattern: 8 on 6-1/2" Flange nut size: 5/8"-18 Capacity: 3,860 lbs Pilot diameter: 4.77" Offset: ±5.35" 2-Year limited warranty Built-In Offset for Dual Applications This wheel is designed to be used in dual-wheel setups.
Carry a spare tire for your truck, van, or SUV while still using your hitch for mounting accessories. The sturdy Roadmaster spare tire carrier holds all wheels with a lug nut circle up to 7", including dually and deep dish style.Features: Sturdy spare tire carrier holds a spare tire for your truck, van, or SUV 2" Receiver hitch allows you to simultaneously connect a tow bar, bike rack, or other hitch-mounted accessory Carrier designed to work with dually and deep dish offset style wheels Carrier pivots down to the ground for ease of use and access to rear compartments or engine Spring-loaded handle makes it easy to pivot carrier down and secure it back in place 2 Separate pin holes let you change the length of the shank Built-in safety cable connection tabs allow for quick hook-up and release Anti-rattle hitch pin secures carrier to RV's hitch and helps to eliminate rattle and play in the connection Black powder coated steel is durable and corrosion resistant Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Maximum 10" spacing between rear of RV and hitch pin hole Fits 16" - 24-1/2" wheels Compatible with all wheel bolt hole patterns Receiver opening of carrier: 2" x 2" Maximum flat towing capacity: 10,000 lbs Maximum tongue weight : 400 lbs Overall dimensions: Extended: 70-1/2" tall from inside top edge of receiver tube on RV to top of handle Retracted: 42-1/2" tall from inside top edge of receiver tube on RV to top of handle Limited Lifetime Warranty Notes: This Roadmaster spare tire carrier is only to be used for flat towing a vehicle or carrying a hitch-mounted accessory, such as a bike rack or a cargo carrier.
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.Features: Protects your truck and towables from damage inflicted by flying rocks and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Mounts near the bumper yet far enough away from the rear wheels to provide a wide range of protection Guards against backsplash - channels on the back direct water flow downward Customizable to your vehicle's specifications for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mud flaps to any length Includes punch tool to create bolt holes in mud flaps for attaching installation clamps Vertical adjustment enables you to maintain consistent ground clearance no matter your load Just loosen 2 bolts and rotate arms up or down, then re-tighten bolts to lock arms into place Horizontal adjustment of support rods allows the mud flaps to fit the width of most trucks Maintains the factory appearance of your vehicle Use them when you're towing - take them off when you're not Installs and removes easily - no drilling or welding required Slide the center hub onto the shank of your 2" ball mount or tow bar (sold separately) and tighten it with set screws Durable construction of all components ensures years of service and performance Heavy-duty, 3/8" thick black rubber mud flaps with molded, tear-resistant fabric layer Heavy-gauge, stainless-steel-sleeved support rods with corrosion-resistant coating inside Black powder coated aluminum clamps and stainless steel hardware attach mud flaps to support rods UV-protected, black matte powder coat finish on forged aluminum center hub and arms Includes polished, stainless steel trim plates with "Rock Tamers" logo Rock Screen (sold separately) helps prevent damage from stones, gravel, and debris while traveling Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2" x 2" trailer hitch receiver and ball mount Adjustable width (outside to outside): 67-1/4" to 96-3/4" Mud flap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit 1-Year limited warranty Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.Features: Protects your truck and towables from damage inflicted by flying rocks and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Mounts near the bumper yet far enough away from the rear wheels to provide a wide range of protection Guards against backsplash - channels on the back direct water flow downward Customizable to your vehicle's specifications for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mud flaps to any length Includes punch tool to create bolt holes in mud flaps for attaching installation clamps Vertical adjustment enables you to maintain consistent ground clearance no matter your load Just loosen 2 bolts and rotate arms up or down, then re-tighten bolts to lock arms into place Horizontal adjustment of support rods allows the mud flaps to fit the width of most trucks Maintains the factory appearance of your vehicle Use them when you're towing - take them off when you're not Installs and removes easily - no drilling or welding required Slide the center hub onto the shank of your 2-1/2" ball mount or tow bar (sold separately) and tighten it with set screws Durable construction of all components ensures years of service and performance Heavy-duty, 3/8" thick black rubber mud flaps with molded, tear-resistant fabric layer Heavy-gauge, stainless-steel-sleeved support rods with corrosion-resistant coating inside Black powder coated aluminum clamps and stainless steel hardware attach mud flaps to support rods UV-protected, black matte powder coat finish on forged aluminum center hub and arms Mud flaps include polished, stainless steel trim plates with "Rock Tamers" logo Rock Screen (sold separately) helps prevent damage from stones, gravel, and debris while traveling Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2-1/2" x 2-1/2" trailer hitch receiver and ball mount Adjustable width (outside to outside): 67-3/4" to 97-1/4" Mud flap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit 1-Year limited warranty Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
These durable, low-carbon steel chains provide excellent traction in deep snow. The rounded twist links limit jarring. Cam tighteners let you quickly adjust chains for a secure fit. Includes chains for driver's and passenger's sides.
17-1/2" x 6-3/4" Stud-piloted wheel has a 6.5" diameter pilot hole. ±6.19" Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup. Rust-resistant 3-step powder coat. Valve stem is included.Features: Heavy-duty wheel is designed for use on dually trucks, buses, and trailers Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup Steel wheel with 2 hand holes is sturdy and corrosion resistant 3-Step finishing process includes zinc phosphate bath, e-coat primer, and white powder coat on both sides of wheel Center disc is spun-formed from fine-grained steel and welded into place for strength and durability Stud-piloted wheel requires the use of inner and outer lug nuts (sold separately) for installation Metal valve stem is included Wheel meets SAE J1204 standards Specs: Rim dimensions: 17-1/2" diameter x 6-3/4" wide Bolt pattern: 10 on 8-3/4" Wheel capacity: 6,200 lbs Pilot diameter: 6.5" Offset: ±6.19" 2-Year limited warranty Built-In Offset for Dual Applications This wheel is designed to be used in dual-wheel setups.
Get upgraded protection with this adjustable mud flap and rock screen kit. The heavy-duty rubber flaps and rip-stop mesh screen shield your truck and towables from flying rocks, debris, and mud.Features: Protects your truck and towables from damage inflicted by flying, mud, and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Rubber mats are customizable to your vehicle for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mud flaps to any length Rock screen attaches behind the mud flaps giving an added layer of protection from stones and gravel Vertical adjustment enables you to maintain consistent ground clearance no matter your load Horizontal adjustment of support rods allows the mud flaps to fit the width of most trucks Maintains the factory appearance of your vehicle Installs and removes easily to use them when you're towing and remove them when you're not No drilling or welding required Mounts onto the shank of your 2-1/2" ball mount or tow bar (sold separately) Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2-1/2" x 2-1/2" trailer hitch receiver and ball mount Adjustable width (outside to outside): 67-3/4" to 97-1/4" Mud flap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit Screen dimensions: 61" wide x 15-7/8" tall in center, 21-1/2" tall on sides Distance between top corner eyelets of screen: 60" Construction: Mud flaps: 3/8" thick black rubber Support rods: stainless-steel with corrosion-resistant coating Rock screen: rip-stop mesh 1-Year limited warranty on Rock Tamers mud flaps Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
17-1/2" x 6-3/4" Hub-piloted wheel has an 8.7" diameter pilot hole. ±5.59" Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup. Acrylic enamel finish resists damage better than powder coat.Features: Heavy-duty wheel is designed for use on dually trucks, buses, and trailers Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup Steel wheel with 4 hand holes is sturdy and corrosion resistant White acrylic enamel finish resists chipping and other damage better than powder coat finishes Finish is applied after a zinc phosphate pre-treatment and covers an e-coat primer layer Excellent corrosion resistance with a salt spray rating of more than 1,000 hours Center disc is spun-formed from fine-grained steel and welded into place for strength and durability Hub-piloted wheel requires the use of flange nuts (sold separately) for installation Metal valve stem is included Wheel meets SAE J1204 standards Specs: Rim dimensions: 17-1/2" diameter x 6-3/4" wide Bolt pattern: 8 on 275 mm (8 on 10.83") Lug nut size: 5/8"-18 Wheel capacity: 6,200 lbs Pilot diameter: 8.7" Offset: ±5.59" 2-Year limited warranty Built-In Offset for Dual Applications This wheel is designed to be used in dual-wheel setups.
Black powder coated, 16" steel dual trailer wheel with 5.35" offset features an 8 on 6-1/2 bolt pattern and meets Department of Transportation standards.Features: Wheel is designed for use on dually trucks, buses, and trailers Wheel offset allows assembly to be used as either the inner or outer wheel of a dual-wheel setup Heavy-duty steel wheel with 4 hand holes is sturdy and corrosion resistant Black powder coat finish over e-coat primer High-quality wheel meets DOT specifications Hub-piloted design Non-chamfered bolt holes Requires 5/8" flange nuts (95188 - sold separately) Specs: Rim dimensions: 16" diameter x 6" wide Bolt pattern: 8 on 6.5" Offset: 5.35" Pilot hole diameter: 4.77" Stud diameter: 5/8" Capacity: 3,860 lbs Limited 2-Year warranty Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Get upgraded protection with this adjustable mud flap and rock screen kit. The heavy-duty rubber flaps and rip-stop mesh screen shield your truck and towables from flying rocks, debris, and mud.Features: Protects your truck and towables from damage inflicted by flying rocks, mud, and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Rubber mats are customizable to your vehicle for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mud flaps to any length Rock screen attaches behind the mud flaps giving an added layer of protection from stones and gravel Vertical adjustment enables you to maintain consistent ground clearance no matter your load Horizontal adjustment of support rods allows the mud flaps to fit the width of most trucks Maintains the factory appearance of your vehicle Installs and removes easily to use them when you're towing and remove them when you're not No drilling or welding required Mounts onto the shank of your 2" ball mount or tow bar (sold separately) Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2" x 2" trailer hitch receiver and ball mount Adjustable width (outside to outside): 67-1/4" to 96-3/4" Mud flap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit Screen dimensions: 61" wide x 15-7/8" tall in center, 21-1/2" tall on sides Distance between top corner eyelets of screen: 60" Construction: Mud flaps: 3/8" thick black rubber Support rods: stainless-steel with corrosion-resistant coating Rock screen: rip-stop mesh 1-Year limited warranty on Rock Tamers mud flaps Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
Filters
