Help prevent damage to your RV's undercarriage by welding this 3" diameter steel wheel onto your trailer or RV frame.Features: Unique roller welds onto frame of trailer or motorhome to help prevent tail dragging and digging in while backing up Heavy-duty steel construction is extra durable Specs: Quantity: 1 Overall bracket dimensions: 2-1/2" wide x 3" long Overall height: 3-1/2" Roller diameter: 2-1/2" 1-Year warranty Note: Not recommended for use on diesel pusher motorhomes due to the extreme rear-end weight of the motorhome.
Help prevent damage to your motorhome's undercarriage by mounting these steel wheels to your rear trailer hitch receiver. Rollers clamp around 2-1/2" x 2-1/2" square hitch tubing.Features: Unique rollers clamp around the crossbar of your RV's rear hitch to help prevent tail dragging and digging in while backing up Mounting hardware included Heavy-duty steel construction is extra durable Specs: Application: 2-1/2" x 2-1/2" square hitch tubing Roller diameter: 3" Quantity: 2 wheels 1-Year warranty Note: Not recommended for use on diesel pusher motorhomes due to the extreme rear-end weight of the motorhome.
Steep ramps can make launches tricky. Black rubber rollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.Highlights Upgrade from Carpet: Replace worn, soggy bunks with rollers that keep your boat moving smoothly at the ramp. Roll Instead of Drag: Rollers let your boat glide on and off like it's on wheels, making shallow-water launches easier than with carpeted bunks.
Carpeted bunks wear out and drag against your hull. Amber polyvinyl rollers trade that drag for a smooth, easy glide, even in shallow water. Made to last a lifetime, they resist sun and water without marking your boat.Highlights Upgrade from Carpet: Replace worn, soggy bunks with rollers that keep your boat moving smoothly at the ramp. Roll Instead of Drag: Rollers let your boat glide on and off like it's on wheels, making shallow-water launches easier than with carpeted bunks.
Steep ramps can make launches tricky. Black rubber rollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.Highlights Upgrade from Carpet: Replace worn, soggy bunks with rollers that keep your boat moving smoothly at the ramp. Roll Instead of Drag: Rollers let your boat glide on and off like it's on wheels, making shallow-water launches easier than with carpeted bunks.
This truck rack works with tonneau covers so you can haul your gear and keep your bed covered. Channels in the uprights and crossbars let you attach a variety of accessories. Adapters attach to your tonneau cover rails with included hardware.Features: Customizable truck rack works with your tonneau cover so you can haul your gear and keep your bed covered Works with Retrax XR, Pace Edwards UltraGroove, or Ford Embark LS tonneau covers Enjoy the benefits of a retractable tonneau cover without sacrificing the ability to have a truck rack Heavy-duty truck bed rack was designed and tested for both on- and off-road use Perfect for tradesman, backcountry explorers, and overlanding adventurers Adjustable uprights with T-slots allow you to customize the rack to your gear carrying needs Channels on inside and outside allow accessories like eye bolts or paddle holders to be mounted directly Rack height adjusts from 19" to 30" to match your load or gear carrying needs Versatile crossbars accommodate most Yakima channel-mount and clamp-on accessories Clamp-on equipment like bike racks, kayak carriers, cargo boxes, and roof top tents Mount accessories like off-road lights, load stops, or a ladder roller in the top channels Add eye bolts or additional lights to the bottom channels Rubberized strips in the crossbars' top channels reduce wind noise and drag SideBar rails (sold separately) provide more carrying space for off-road and utility accessories Built-in tie-down points on uprights and crossbars' endcaps make it easy to secure gear QuickChange system allows rack to be installed and removed in minutes - no drilling required Simply slide tonneau adapters onto the tonneau cover's tracks and tighten to the pad and tower BedGrip clamps secure to bed rails on most common truck beds Etched measurements on uprights and crossbars help center the rack Same Key System (SKS) lock cores secure uprights to your truck SKS cores can be swapped out to make all your Yakima products keyed alike Sturdy aluminum construction with black powder coat is durable and rustproof Signature bottle openers allow you to enjoy a cold one after a long day Specs: Weight capacity: On-road: 500 lbs Off-road: 300 lbs Crossbar spread: 36" - 89" Upright height adjustment: 19" - 30" above truck bed rails Upright dimensions: 19" tall x 16-3/4" long x 5-1/2" wide Crossbar dimensions: 68" long x 3" wide x 1-1/2" thick Channel dimensions: 62" long x 7/16" wide x 5/16" deep Tonneau adapter dimensions: 16-3/4" long x 4-1/2" wide x 3" tall Limited lifetime warranty Tonneau Cover Compatibility This truck rack includes adapters that let you fit the uprights to the top of your tonneau cover.
Tired of cranking, bouncing, or backing in too deep at the ramp? Slydz-On helps your boat slide off and onto your trailer bunks smoother, without the mess of grease or installing rollers. Just spray it on, let it dry, and let it work.
This truck rack works with tonneau covers so you can haul your gear and keep your bed covered. Channels in the uprights and crossbars let you attach a variety of accessories. Adapters attach to your tonneau cover rails with included hardware.Features: Customizable truck rack works with your tonneau cover so you can haul your gear and keep your bed covered Works with Retrax XR, Pace Edwards UltraGroove, or Ford Embark LS tonneau covers Enjoy the benefits of a retractable tonneau cover without sacrificing the ability to have a truck rack Heavy-duty truck bed rack was designed and tested for both on- and off-road use Perfect for tradesman, backcountry explorers, and overlanding adventurers Adjustable uprights with T-slots allow you to customize the rack to your gear carrying needs Channels on inside and outside allow accessories like eye bolts or paddle holders to be mounted directly Rack height adjusts from 19" to 30" to match your load or gear carrying needs Versatile crossbars accommodate most Yakima channel-mount and clamp-on accessories Clamp-on equipment like bike racks, kayak carriers, cargo boxes, and roof top tents Mount accessories like off-road lights, load stops, or a ladder roller in the top channels Add eye bolts or additional lights to the bottom channels Rubberized strips in the crossbars' top channels reduce wind noise and drag SideBar rails (sold separately) provide more carrying space for off-road and utility accessories Built-in tie-down points on uprights and crossbars' endcaps make it easy to secure gear QuickChange system allows rack to be installed and removed in minutes - no drilling required Simply slide tonneau adapters onto the tonneau cover's tracks and tighten to the pad and tower BedGrip clamps secure to bed rails on most common truck beds Etched measurements on uprights and crossbars help center the rack Same Key System (SKS) lock cores secure uprights to your truck SKS cores can be swapped out to make all your Yakima products keyed alike Sturdy aluminum construction with black powder coat is durable and rustproof Signature bottle openers allow you to enjoy a cold one after a long day Specs: Weight capacity: On-road: 500 lbs Off-road: 300 lbs Crossbar spread: 36" - 89" Upright height adjustment: 19" - 30" above truck bed rails Upright dimensions: 19" tall x 16-3/4" long x 5-1/2" wide Crossbar dimensions: 60" long x 3" wide x 1-1/2" thick Channel dimensions: 54" long x 7/16" wide x 5/16" deep Tonneau adapter dimensions: 16-3/4" long x 4-1/2" wide x 3" tall Limited lifetime warranty Tonneau Cover Compatibility This truck rack includes adapters that let you fit the uprights to the top of your tonneau cover.
This truck rack works with tonneau covers so you can haul your gear and keep your bed covered. Channels in the uprights and crossbars let you attach a variety of accessories. Adapters attach to your tonneau cover rails with included hardware.Features: Customizable truck rack works with your tonneau cover so you can haul your gear and keep your bed covered Works with Retrax XR, Pace Edwards UltraGroove, or Ford Embark LS tonneau covers Enjoy the benefits of a retractable tonneau cover without sacrificing the ability to have a truck rack Heavy-duty truck bed rack was designed and tested for both on- and off-road use Perfect for tradesman, backcountry explorers, and overlanding adventurers Adjustable uprights with T-slots allow you to customize the rack to your gear carrying needs Channels on inside and outside allow accessories like eye bolts or paddle holders to be mounted directly Rack height adjusts from 19" to 30" to match your load or gear carrying needs Versatile crossbars accommodate most Yakima channel-mount and clamp-on accessories Clamp-on equipment like bike racks, kayak carriers, cargo boxes, and roof top tents Mount accessories like off-road lights, load stops, or a ladder roller in the top channels Add eye bolts or additional lights to the bottom channels Rubberized strips in the crossbars' top channels reduce wind noise and drag SideBar rails (sold separately) provide more carrying space for off-road and utility accessories Built-in tie-down points on uprights and crossbars' endcaps make it easy to secure gear QuickChange system allows rack to be installed and removed in minutes - no drilling required Simply slide tonneau adapters onto the tonneau cover's tracks and tighten to the pad and tower BedGrip clamps secure to bed rails on most common truck beds Etched measurements on uprights and crossbars help center the rack Same Key System (SKS) lock cores secure uprights to your truck SKS cores can be swapped out to make all your Yakima products keyed alike Sturdy aluminum construction with black powder coat is durable and rustproof Signature bottle openers allow you to enjoy a cold one after a long day Specs: Weight capacity: On-road: 500 lbs Off-road: 300 lbs Crossbar spread: 36" - 89" Upright height adjustment: 19" - 30" above truck bed rails Upright dimensions: 19" tall x 16-3/4" long x 5-1/2" wide Crossbar dimensions: 78" long x 3" wide x 1-1/2" thick Channel dimensions: 72" long x 7/16" wide x 5/16" deep Tonneau adapter dimensions: 16-3/4" long x 4-1/2" wide x 3" tall Limited lifetime warranty Tonneau Cover Compatibility This truck rack includes adapters that let you fit the uprights to the top of your tonneau cover.
This off-road winch has a 6.0-hp motor and a heavy-duty gearbox that are ideal for recovery applications. It includes an 84' wire rope and roller fairlead, a hand-held remote and 12' lead, and a pull-and-turn free-spool clutch.Features: Off-road winch is designed for heavy-duty vehicle recovery applications Sealed, 6.0-hp, series-wound motor efficiently delivers quick, safe line pulling Responds to an increase in load by slowing down and reducing the current to minimize the risk of overheating Reduces the risk of damage from rain, snow, and dust Rubber, hand-held remote with 12' long cord lets you operate the winch from a safe distance Use toggle switch on the remote to power the load in and out Ergonomic, pull-and-turn free-spool clutch ensures fast rope payout Sealed, rotating gearbox lets you customize the position of the clutch for easy access 3/8" Diameter wire rope is strong and durable - 84' long Includes removable latched hook and nylon hand-saver strap Mounts over an all-steel drum Stainless steel, 4-way roller fairlead protects the wire rope from damage by reducing strain and rubbing Brushed finish resists weather and wear caused by wire rope Automatic, 100-percent-load-holding mechanical brake Eliminates drag when you are pulling in the cable Reduces creep when you are letting out the cable Weather-sealed solenoid reduces the possibility of damage from rain, snow, and blowing dust All-steel, 3-stage planetary gearbox Rugged construction stands up to stress and torque Quickly and quietly turns the drum Extruded aluminum body with severe-duty textured finish is sturdy and corrosion resistant Stainless steel tie-bars and hardware add strength and structural rigidity to the body Heavy-duty drum supports are load tested to stall Circuit breakers and color-coded wiring included for installation Specs: Rated line pull (with a single layer of wire rope around the drum): 11,500 lbs (static load) Vehicle recovery capacity: 8,500 lbs Motor: 12-volt DC Line pull at 0 lbs: Power draw: 80 amps Line speed: 19 FPM Line pull at 11,500 lbs: Power draw: 410 amps Line speed: 2 FPM Maximum continuous run time: 2 minutes Gear ratio: 218:1 Braking: 100-percent-load-holding mechanical Winch dimensions: 20-13/16" long x 6-5/16" wide x 9-1/5" tall Rope dimensions: 84' long x 3/8" diameter Drum dimensions: 2-1/2" diameter x 9" long 4-Bolt mounting pattern: 10" x 4-1/2" on center Winch weight: 94 lbs 3-Year limited warranty on electrical components Lifetime warranty on mechanical components
Attach these sturdy steel wheels to the rear of your RV to help prevent tail dragging when backing up. Protect your undercarriage from unnecessary damage.Features: Unique casters attach to the frame of your RV to help prevent tail dragging and digging in while backing up Sturdy steel construction and extra-durable roller bearings are long-lasting 1/4" Thick urethane layers outer edge of each wheel Provides anti-skid barrier Ensures that wheel lasts even longer by avoiding metal degradation Weld brackets to your RV then bolt skid wheels to the brackets using the included hardware.
Ideal for sports, recreation, and outdoor adventures - the BedRock HD keeps all your gear within reach. This low-profile truck rack carries bikes, kayaks, cargo baskets, or other gear above the truck bed and keeps the bed free for extra cargo.Features: Low-profile truck rack lets you carry bikes, kayaks, cargo carriers, or a rooftop tent above your bed Leaves your truck bed free to carry more cargo like coolers or additional boats Keeps elevated gear within reach, making loading and unloading quick and easy Heavy-duty truck bed rack was designed and tested for both on- and off-road use Perfect for sports enthusiasts and weekend adventurers Versatile crossbars accommodate most Yakima channel-mount and clamp-on accessories Clamp-on equipment like bike racks, kayak carriers, cargo boxes, and roof top tents Mount accessories like off-road lights, load stops, or a ladder roller in the top channels Rubberized strips in the crossbars' top channels reduce wind noise and drag Built-in tie-down points on crossbars' endcaps make it easy to secure gear Adjustable towers with quick-release levers clamp to your bed rails - no drilling required Included adapters let you install the rack on a truck with a factory utility track system in the bed Etched measurements on crossbars help center the rack Same Key System (SKS) lock cores secure towers to your vehicle SKS cores can be swapped out to make all your Yakima products keyed alike Durable aluminum construction with powder coat to resist rust and corrosion Specs: Application: most full-sized trucks Weight capacity: On-road: 300 lbs Off-road: 180 lbs Minimum crossbar spread for truck bed: 24" Tower dimensions: 7" tall x 5-1/2" long x 4-1/4" wide Crossbar dimensions: 78" long x 3" wide x 1-1/2" thick T-slot dimensions: 13/16" wide x 1/4" tall T-slot top opening: 3/8" Underbar slot: Full length Limited lifetime warranty Yakima Off-Road Rating This truck rack was tested to ensure that it is able to handle regularly adventuring over rough terrain.
This truck rack works with tonneau covers so you can haul gear and keep your bed covered. Mid-height truck rack keeps cargo above the bed but well within reach on your adventures. Adapters attach to your tonneau cover rails with included hardware.Features: Customizable, mid-height truck rack works with your tonneau cover so you can haul your gear and keep your bed covered Works with Retrax XR, Pace Edwards UltraGroove, or Ford Embark LS tonneau covers Enjoy the benefits of a retractable tonneau cover without sacrificing the ability to have a truck rack Heavy-duty truck bed rack was designed and tested for both on- and off-road use Perfect for backcountry explorers and overland camping Mid-height uprights with T-slots allow you to customize the rack to your gear carrying needs Channels on inside and outside allow accessories like eye bolts or paddle holders to be mounted directly Fixed uprights sit 13" above truck bed rails, providing a low-center of gravity for the rack and easy access to your gear Versatile crossbars accommodate most Yakima channel-mount and clamp-on accessories Clamp-on equipment like bike racks, kayak carriers, cargo boxes, and roof top tents Mount accessories like off-road lights, load stops, or a ladder roller in the top channels Add eye bolts or additional lights to the bottom channels Rubberized strips in the crossbars' top channels reduce wind noise and drag SideBar rails (sold separately) provide more carrying space for off-road and utility accessories Built-in tie-down points on uprights and crossbars make it easy to secure gear QuickChange system allows rack to be installed and removed in minutes - no drilling required Simply slide tonneau adapters onto the tonneau cover's tracks and tighten to the pad and tower BedGrip clamps secure to bed rails on most common truck beds Etched measurements on crossbars help center the rack Same Key System (SKS) lock cores secure uprights to your truck SKS cores can be swapped out to make all your Yakima products keyed alike Sturdy aluminum construction with black powder coat is durable and rustproof Signature bottle openers allow you to enjoy a cold one after a long day Specs: Weight capacity: On-road: 300 lbs Off-road: 180 lbs Crossbar spread: 36" - 95-7/8" Upright height: 13" above truck bed rails Upright dimensions: 16-3/4" long x 16-1/2" tall x 5-1/2" wide Crossbar dimensions: 78" long x 3" wide x 1-1/2" thick Channel dimensions: 72" long x 7/16" wide x 5/16" deep Tonneau adapter dimensions: 16-3/4" long x 4-1/2" wide x 3" tall Limited lifetime warranty Tonneau Cover Compatibility This truck rack includes adapters that let you fit the uprights to the top of your tonneau cover.
Roller attaches beneath your motorhome's hitch receiver opening to help prevent damage to your trailer hitch. Pin and clip sold separately.Features: Unique roller mounts under your RV's rear hitch receiver opening to help prevent damage to your hitch that can occur from tail dragging and digging in while backing up Attaches with pin and clip or hitch lock (sold separately) Can be used at the same time as ball mount or other hitch-mounted accessories Heavy-duty steel construction is extra durable Specs: Application: 2" x 2" trailer hitch receivers Pin hole diameter: 5/8" 1-Year warranty Note: Not recommended for use on diesel pusher motorhomes due to the extreme rear-end weight of the motorhome.
This truck rack works with tonneau covers so you can haul gear and keep your bed covered. Mid-height truck rack keeps cargo above the bed but well within reach on your adventures. Adapters attach to your tonneau cover rails with included hardware.Features: Customizable, mid-height truck rack works with your tonneau cover so you can haul your gear and keep your bed covered Works with Retrax XR, Pace Edwards UltraGroove, or Ford Embark LS tonneau covers Enjoy the benefits of a retractable tonneau cover without sacrificing the ability to have a truck rack Heavy-duty truck bed rack was designed and tested for both on- and off-road use Perfect for backcountry explorers and overland camping Mid-height uprights with T-slots allow you to customize the rack to your gear carrying needs Channels on inside and outside allow accessories like eye bolts or paddle holders to be mounted directly Fixed uprights sit 13" above truck bed rails, providing a low-center of gravity for the rack and easy access to your gear Versatile crossbars accommodate most Yakima channel-mount and clamp-on accessories Clamp-on equipment like bike racks, kayak carriers, cargo boxes, and roof top tents Mount accessories like off-road lights, load stops, or a ladder roller in the top channels Add eye bolts or additional lights to the bottom channels Rubberized strips in the crossbars' top channels reduce wind noise and drag SideBar rails (sold separately) provide more carrying space for off-road and utility accessories Built-in tie-down points on uprights and crossbars make it easy to secure gear QuickChange system allows rack to be installed and removed in minutes - no drilling required Simply slide tonneau adapters onto the tonneau cover's tracks and tighten to the pad and tower BedGrip clamps secure to bed rails on most common truck beds Etched measurements on crossbars help center the rack Same Key System (SKS) lock cores secure uprights to your truck SKS cores can be swapped out to make all your Yakima products keyed alike Sturdy aluminum construction with black powder coat is durable and rustproof Signature bottle openers allow you to enjoy a cold one after a long day Specs: Weight capacity: On-road: 300 lbs Off-road: 180 lbs Crossbar spread: 36" - 95-7/8" Upright height: 13" above truck bed rails Upright dimensions: 16-3/4" long x 16-1/2" tall x 5-1/2" wide Crossbar dimensions: 68" long x 3" wide x 1-1/2" thick Channel dimensions: 62" long x 7/16" wide x 5/16" deep Tonneau adapter dimensions: 16-3/4" long x 4-1/2" wide x 3" tall Limited lifetime warranty Tonneau Cover Compatibility This truck rack includes adapters that let you fit the uprights to the top of your tonneau cover.
Long-lasting, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails, and a cargo light makes it easy to see inside the bed. Durable polycarbonate is supremely weather resistant.It does this by gliding along the side rails with sealed ball-bearing rollers, which also prevent the cover from binding or retracting unevenly. The PowertraxONE MX has no joints or hinges that can wear out, freeze, or trap dirt.
Heavy-duty, adjustable ladder rack mounts to custom tracks and lets you carry gear using your truck bed rails, overlanding trailers, and more. Perfect for on- and off-road adventures. Includes T-slots in uprights and crossbars for accessories.Features: Customizable ladder rack mounts to tracks and lets you carry gear using your truck bed rails, overlanding trailers, and other custom applications Heavy-duty rack was designed and tested for both on- and off-road use Tracks mount your rack to camper shells, truck bed rails, gear trailers, and other flat surfaces - drilling required Endcaps provide finished look for the tracks Mounting hardware included Adjustable uprights with T-slots allow you to customize the rack to your gear carrying needs Channels on inside and outside allow accessories like eye bolts or paddle holders to be mounted directly Rack height adjusts from 19" to 30" to match your load or gear carrying needs Versatile crossbars accommodate most Yakima channel-mount and clamp-on accessories Clamp-on equipment like bike racks, kayak carriers, cargo boxes, and roof top tents Mount accessories like off-road lights, load stops, or a ladder roller in the top channels Add eye bolts or additional lights to the bottom channels Rubberized strips in the crossbars' top channels reduce wind noise and drag SideBar rails (sold separately) provide more carrying space for off-road and utility accessories Built-in tie-down points on uprights and crossbars' endcaps make it easy to secure gear QuickChange system allows rack to be installed and removed in minutes BedGrip clamps secure to bed rails on most common truck beds Etched measurements on uprights and crossbars help center the rack Same Key System (SKS) lock cores secure uprights to your truck SKS cores can be swapped out to make all your Yakima products keyed alike Sturdy aluminum construction with black powder coat is durable and rustproof Signature bottle openers allow you to enjoy a cold one after a long day Specs: Weight capacity: On-road: 500 lbs Off-road: 300 lbs Upright height adjustment: 19" - 30" above tracks Upright dimensions: 23-1/2" tall x 16-3/4" long x 5-1/2" wide Track dimensions: 60" long x 2" wide x 13/16" tall Crossbar dimensions: 60" long x 3" wide x 1-1/2" thick Channel dimensions: 54" long x 7/16" wide x 5/16" deep Limited lifetime warranty
Ideal for sports, recreation, and outdoor adventures - the BedRock HD keeps all your gear within reach. This low-profile truck rack carries bikes, kayaks, cargo baskets, or other gear above the truck bed and keeps the bed free for extra cargo.Features: Low-profile truck rack lets you carry bikes, kayaks, cargo carriers, or a rooftop tent above your bed Leaves your truck bed free to carry more cargo like coolers or additional boats Keeps elevated gear within reach, making loading and unloading quick and easy Heavy-duty truck bed rack was designed and tested for both on- and off-road use Perfect for sports enthusiasts and weekend adventurers Versatile crossbars accommodate most Yakima channel-mount and clamp-on accessories Clamp-on equipment like bike racks, kayak carriers, cargo boxes, and roof top tents Mount accessories like off-road lights, load stops, or a ladder roller in the top channels Rubberized strips in the crossbars' top channels reduce wind noise and drag Built-in tie-down points on crossbars' endcaps make it easy to secure gear Adjustable towers with quick-release levers clamp to your bed rails - no drilling required Included adapters let you install the rack on a truck with a factory utility track system in the bed Etched measurements on crossbars help center the rack Same Key System (SKS) lock cores secure towers to your vehicle SKS cores can be swapped out to make all your Yakima products keyed alike Durable aluminum construction with powder coat to resist rust and corrosion Specs: Application: most mid-sized trucks Weight capacity: On road: 300 lbs Off road 180 lbs Static load capacity: 800 lbs Minimum crossbar spread for truck bed: 24" Tower dimensions: 7" tall x 5-1/2" long x 4-1/4" wide Crossbar dimensions: 68" long x 3" wide x 1-1/2" thick T-slot dimensions: 13/16" wide x 1/4" tall T-slot top opening: 3/8" Underbar slot: Full length Limited lifetime warranty Yakima Off-Road Rating This truck rack was tested to ensure that it is able to handle regularly adventuring over rough terrain.
Retractable cover opens and closes manually with a pop-up, locking handle that provides excellent security for your truck bed. Durable polycarbonate is long-lasting and supremely weather resistant. Sleek, streamlined design complements your vehicle.It does this by gliding along the side rails with sealed ball-bearing rollers, which also prevent the cover from binding or retracting unevenly. The RetraxONE MX has no joints or hinges that can wear out, freeze, or trap dirt.
Retractable cover opens and closes manually with a pop-up, locking handle. That, paired with impact-resistant, 1" thick aluminum, will give you the best security for the cargo in your bed. Sleek, streamlined design complements your vehicle.It does this by gliding along the side rails with sealed ball-bearing rollers, which also prevent the cover from binding or retracting unevenly. The RetraxPRO MX has no joints or hinges that can wear out, freeze, or trap dirt.
Retractable cover opens and closes manually with a pop-up, locking handle. That, paired with impact-resistant, 1" thick aluminum, will give you the best security for the cargo in your bed. Sleek, streamlined design complements your vehicle.It does this by gliding along the side rails with sealed ball-bearing rollers, which also prevent the cover from binding or retracting unevenly. The RetraxPRO MX has no joints or hinges that can wear out, freeze, or trap dirt.
Retractable cover opens and closes manually with a pop-up, locking handle that provides excellent security for your truck bed. Durable polycarbonate is long-lasting and supremely weather resistant. Sleek, streamlined design complements your vehicle.It does this by gliding along the side rails with sealed ball-bearing rollers, which also prevent the cover from binding or retracting unevenly. The RetraxONE MX has no joints or hinges that can wear out, freeze, or trap dirt.
Retractable cover opens and closes manually with a pop-up, locking handle. That, paired with impact-resistant, 1" thick aluminum, will give you the best security for the cargo in your bed. Sleek, streamlined design complements your vehicle.It does this by gliding along the side rails with sealed ball-bearing rollers, which also prevent the cover from binding or retracting unevenly. The RetraxPRO MX has no joints or hinges that can wear out, freeze, or trap dirt.
Filters
