Check grease levels at a glance with the blue auto-check ring. Stainless steel Bearing Buddies maintain light grease pressure inside the hub to protect your bearings, even when submerged, while the zerk fitting makes adding grease quick and easy.Features: Replaces the grease cap in the axle hub Prevents wheel-bearing failure Keeps water and dirt out of hubs and bearings Allows boat trailer wheels to be completely submerged Stops corrosion and pitting on bearings Provides easily accessible grease fitting Makes adding grease to the bearings quick and simple Maintains slight, controlled pressure (3 psi) with spring-loaded piston, preventing water from entering hub Allows visual monitoring of grease levels with blue indicator ring Ring sits flush with top of cylinder when full If ring is below top, add grease to move piston outward 1/8" Prevents overfilling and rear seal damage with automatic pressure-relief feature Grease seeps around piston edges and into barrel when full Constructed of stainless steel for long-term corrosion protection Also ensures longer-lasting fit than plastic or aluminum products Includes rubber covers Installs easily Made in the USA Specs: Fits 1.980" hub bore Works with outer bearing models L44643, L44649 and L44640 Works with outer bearing cup (race) model L44610 Commonly found on 2,000-lb, 2,500-lb and 3,500-lb Dexter axles Lifetime warranty Bearing Buddy Operation Replace your existing grease cap with a Bearing Buddy for an easy way to monitor and maintain the grease level in your axle hub.
Upgrade your trailer's suspension system with these rubber equalizers for a smoother, more comfortable ride. The rubber insert offers up to 3" of suspension travel for greater shock absorption.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.
Hook up an auxiliary tank to your RV to provide propane in case your primary runs dry during long campouts and get extra versatility in your propane system. Gives you a quick-disconnect outlet for cooking and includes supply hose and extension hose.Features: T-fitting kit lets you connect a backup auxiliary cylinder to your RV's propane system No need to break up camp to go refill your onboard ASME tank POL fittings install in-line between your tank valve and pigtail to your pressure regulator 2 Model 250 quick-disconnect ports let you hook up and disconnect without hand tightening When valve on your ASME tank is closed, one port can function as an inlet for an auxiliary tank When valve on your tank is open, can provide propane to 2 appliances Shut-off levers on quick-disconnect ports allow you to easily shut off gas supply Ball valve prevents disconnection when lever is in the "on" position to keep gas contained Supply hose with male quick-disconnect and male POL fittings is included to attach auxiliary tank Close valve on your RV's primary tank, attach POL to backup tank, and attach to Sturgi-Stay Designed for high-pressure and high flow without going into bypass mode Adapter hose with #600 (1"-20) to quick-disconnect fittings included to fuel your portable camping grill Eliminates need for wasteful disposable cylinders that quickly run out of gas Durable brass fittings approved for LP gas only UL and CSA certified Made in the USA Specs: Temperature range: -40 F to 350 F Maximum pressure rating: 250 psi Supply hose dimensions: 72" long x 1/4" inner diameter Supply hose fittings: 1/4" Male Model 250 quick-disconnect POL tank connection Adapter hose dimensions: 120" long x 1/4" inner diameter Adapter hose fittings: Male #600 (1"-20) 1/4" Male Model 250 quick-disconnect 1-Year limited warranty Note: When using quick-disconnect ports for cooking, bear in mind that the propane pressure is still high, as the Sturgi-Stay is installed before the regulator.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.
Replaces the white, wedge-shaped, polypropylene plastic cover on your Ventline Ventadome RV roof vent.Features: Replaces the wedge-shaped, polypropylene lid on Ventadome roof vents for motor homes and enclosed trailers Works with Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008 White color Made in the USA
Connect your RV to a secondary inlet, such as the Sturgi-Stay, to use a backup propane tank to fuel your RV. Hooks into the quick-disconnect propane inlet so you don't have to break up camp just to refill your primary LPG tank.Features: Adapter hose lets you connect a backup tank to a secondary inlet in your propane system Replaces the need to use small, disposable propane tanks Get more use out of your grill, heater, or other small appliance Male quick-disconnect fitting lets you hook up and disconnect without hand tightening POL fitting attaches to an auxiliary tank to provide fuel Swivel collar makes connection easy without the hose twisting when you hook up Durable thermoplastic hose and brass fittings approved for LP gas only UL569 certified Made in the USA Specs: Temperature range: -40 F to 140 F Hose dimensions: 120" long x 1/4" inner diameter Hose fittings: POL tank connection 1/4" Male Model 250 quick-disconnect Maximum pressure rating: 350 psi 1-Year limited warranty Quick-Disconnect Hose Connection The quick-disconnect fitting on this hose hooks up to the female Model 250 port on a Sturgi-Stay T-fitting, an adapter mounted on a propane tank, or another quick-disconnect port in your RV's propane system.
This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.
Enhance your towing experience by expanding your field of vision with these towing mirrors. Custom-fit mirrors slide over your vehicle's factory mirrors to improve sightlines while towing your trailer. Tool-free installation.
Protect your trailer bearings from water, dirt, and corrosion while making greasing quick and easy. Stainless steel Bearing Buddies maintain light grease pressure inside the hub to help prevent bearing failure, even when your hubs are submerged.Features: Replaces the grease cap in the axle hub Prevents wheel-bearing failure Keeps water and dirt out of hubs and bearings Allows boat trailer wheels to be completely submerged Stops corrosion and pitting on bearings Provides easily accessible grease fitting Makes adding grease to the bearings quick and simple Maintains slight, controlled pressure (3 psi) with spring-loaded piston, preventing water from entering hub Prevents overfilling and rear seal damage with automatic pressure-relief feature Grease seeps around piston edges and into barrel when full Constructed of stainless steel for long-term corrosion protection Ensures longer-lasting fit than plastic or aluminum products Includes rubber covers Installs easily Made in the USA Specs: Fits 2.441" hub bore Works with outer bearing models LM67048 (hub counterbored), 15123 and others Works with outer bearing cup (race) models LM67010 and 15245 Commonly found on 4,400-lb, 5,200-lb, 6,000-lb and 7,000-lb Dexter axles (counterbored) Lifetime warranty Bearing Buddy Operation Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub.
Step up your campout cooking game and ditch those little green cylinders that run out of gas far too soon. This hose snaps into the quick-disconnect outlet on your RV to give you a steady supply of gas for your cooktop, heater, or other appliance.Features: Adapter hose lets you connect a small, portable appliance to a quick-disconnect outlet Replaces the need to use small, disposable propane tanks Get more use out of your grill, heater, or other small appliance Male quick-disconnect fitting lets you hook up and disconnect without hand tightening Male #600 (1"-20) disposable cylinder port lets you fuel your portable camping grill Swivel collar makes connection easy without the hose twisting when you hook up Durable thermoplastic hose and brass fittings approved for LP gas only CGA 8.3 certified Made in the USA Specs: Temperature range: -40 F to 140 F Hose dimensions: 120" long x 1/4" inner diameter Hose fittings: 1/4" Male Model 250 quick-disconnect Male #600 (1"-20) Maximum pressure rating: 350 psi 1-Year limited warranty Quick-Disconnect Hose Connection The quick-disconnect fitting on this hose hooks up to the female Model 250 port on a Sturgi-Stay T-fitting, an adapter mounted on a propane tank, or another quick-disconnect port in your RV's propane system.
Convert your threaded oil-bath hub to grease with stainless steel Bearing Buddies. It maintain light grease pressure inside the hub to protect your bearings, even when submerged, while the zerk fitting makes adding grease quick and easy.Features: Replaces threaded grease cap in the axle hub Prevents wheel-bearing failure Keeps water and dirt out of hubs and bearings Allows boat trailer wheels to be completely submerged Stops corrosion and pitting on bearings Provides easily accessible grease fitting Makes adding grease to the bearings quick and simple Maintains slight, controlled pressure (3 psi) with spring-loaded piston, preventing water from entering hub Prevents overfilling and rear seal damage with automatic pressure-relief feature Grease seeps around piston edges and into barrel when full Constructed of stainless steel to resist corrosion Ensures longer-lasting fit than plastic or aluminum products Includes rubber covers Installs easily Made in the USA Specs: Will only fit a hub with inside diameter of 2.321" and 12 TPSI Replaces Tie Down's Turbo Lube oil baths Works with outer bearing models LM67048 (hub counterbored), 15123 and others Works with outer bearing cup (race) models LM67010 and 15245 Bearing Buddy recommends using a grease proof gasket cement when installing Lifetime warranty Bearing Buddy Operation This threaded Bearing Buddy lets you convert an oil-bath hub to grease lubrication while giving you an easy way to monitor and maintain the grease level in your axle hub.
Convert your threaded oil-bath hub to grease with stainless steel Bearing Buddies. It maintain light grease pressure inside the hub to protect your bearings, even when submerged, while the zerk fitting makes adding grease quick and easy.
This replacement assembly fits Dexter Model 10 and Model 20 trailer brake actuators for drum brakes.Features: Works with Dexter Model 10 and Model 20 brake actuators Drum brake models only Measures 4-3/4" on mounting hole centers Includes: Master cylinder Orifice connector Right-hand bracket assembly Left-hand bracket assembly Hex bolt: 3/8" diameter Lock washer: 3/8" Hex nut: 3/8" diameter Plastic cylinder cap
The built-in slider on this sturdy 5th-wheel hitch helps eliminate clearance concerns during slow-speed turns. Dual jaws offer excellent jaw-to-king-pin contact. Hitch removes easily for full bed access.Quiet, Secure Ride The 1" thick jaw on the Companion is precision machined to provide a tight, sturdy connection. And unlike slide-bar models, the rounded 2-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
Replaces the master cylinder assembly for your Dexter Model 10 or Model 20 brake actuator. Works for disc brake applications only. For drum brake applications use T2374600 instead.Features: Replaces the master cylinder assembly for your Dexter Model 10 or Model 20 brake actuator Works for disc brake applications only For drum brake applications use T2374600 instead Comes with the master cylinder and everything needed to install in your actuator including: Master cylinder Brass connector Right-hand cylinder mounting bracket Left-hand cylinder mounting bracket (2) 3/8" Hex bolts (2) 3/8" Hex nuts (2) 3/8" Lock washers Filler cap Fits: All Dexter Model 10 brake actuators for disc brakes All Dexter Model 20 brake actuators for disc brakes
Protect your trailer bearings from water, dirt, and corrosion while making greasing quick and easy. Stainless steel Bearing Buddies maintain light grease pressure inside the hub to help prevent bearing failure, even when your hubs are submerged.Features: Replaces the grease cap in the axle hub Prevents wheel-bearing failure Keeps water and dirt out of hubs and bearings Allows boat trailer wheels to be completely submerged Stops corrosion and pitting on bearings Provides easily accessible grease fitting Makes adding grease to the bearings quick and simple Maintains slight, controlled pressure (3 psi) with spring-loaded piston, preventing water from entering hub Prevents overfilling and rear seal damage with automatic pressure-relief feature Grease seeps around piston edges and into barrel when full Constructed of stainless steel for long-term corrosion protection Ensures longer-lasting fit than plastic or aluminum products Includes rubber covers Installs easily Made in the USA Specs: Fits 2.717" hub bore Works with outer bearing models 14124 and 14125A Works with outer bearing cup (race) model 14276 Commonly found on 5,200-lb to 7,000-lb Dexter axles Lifetime warranty Bearing Buddy Operation Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub.
Protect your trailer bearings from water, dirt, and corrosion while making greasing quick and easy. Bearing Buddies maintain light grease pressure inside the hub to help prevent bearing failure, even when your hubs are completely submerged.Features: Replaces the grease cap in the axle hub Prevents wheel-bearing failure Keeps water and dirt out of hubs and bearings Allows boat trailer wheels to be completely submerged Stops corrosion and pitting on bearings Provides easily accessible grease fitting Makes adding grease to the bearings quick and simple Maintains slight, controlled pressure (3 psi) with spring-loaded piston, preventing water from entering hub Prevents overfilling and rear seal damage with automatic pressure-relief feature Grease seeps around piston edges and into barrel when full Constructed of stainless steel internal parts and triple-chrome-plated steel barrel Ensures longer-lasting fit than plastic or aluminum products Includes rubber covers Installs easily Made in the USA Specs: Fits 1.968" hub bore Works with outer bearing models M12649 and 07100 Works with outer bearing cup (race) models M12610 and 07196 Commonly found on 2,000 lb and 3500 lb axles Lifetime warranty Bearing Buddy Operation Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub.
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Protect your trailer bearings from water, dirt, and corrosion while making greasing quick and easy. Stainless steel Bearing Buddies maintain light grease pressure inside the hub to help prevent bearing failure, even when your hubs are submerged.Features: Replaces the grease cap in the axle hub Prevents wheel-bearing failure Keeps water and dirt out of hubs and bearings Allows boat trailer wheels to be completely submerged Stops corrosion and pitting on bearings Provides easily accessible grease fitting Makes adding grease to the bearings quick and simple Maintains slight, controlled pressure (3 psi) with spring-loaded piston, preventing water from entering hub Prevents overfilling and rear seal damage with automatic pressure-relief feature Grease seeps around piston edges and into barrel when full Constructed of stainless steel for long-term corrosion protection Ensures longer-lasting fit than plastic or aluminum products Includes rubber covers Installs easily Made in the USA Specs: Fits 1.980" hub bore Works with outer bearing models L44643, L44649 and L44640 Works with outer bearing cup (race) model L44610 Commonly found on 2,000-lb, 2,500-lb and 3,500-lb Dexter axles Lifetime warranty Bearing Buddy Operation Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub.
Protect your trailer bearings from water, dirt, and corrosion while making greasing quick and easy. Bearing Buddies maintain light grease pressure inside the hub to help prevent bearing failure, even when your hubs are completely submerged.
Protect your trailer bearings from water, dirt, and corrosion while making greasing quick and easy. Bearing Buddies maintain light grease pressure inside the hub to help prevent bearing failure, even when your hubs are completely submerged.Features: Replaces the grease cap in the axle hub Prevents wheel-bearing failure Keeps water and dirt out of hubs and bearings Allows boat trailer wheels to be completely submerged without risking water damage Stops corrosion and pitting on bearings Provides easily accessible grease fitting Makes adding grease to the bearings quick and simple Maintains slight, controlled pressure (3 psi) with spring-loaded piston, preventing water or debris from entering hub Prevents overfilling and rear seal damage with automatic pressure-relief feature Grease seeps around piston edges and into barrel when full Constructed of stainless steel internal parts and triple-chrome-plated steel barrel Eliminates the need for frequent bearing repacking when properly maintained Ensures longer-lasting fit than plastic or aluminum products Includes rubber covers Installs easily Made in the USA Specs: Fits 2.441" hub bore Works with outer bearing models LM67048 (hub counterbored), 15123 and others Works with outer bearing cup (race) models LM67010 and 15245 Commonly found on 4,400-lb, 5,200-lb, 6,000-lb and 7,000-lb Dexter axles (counterbored) Lifetime warranty Bearing Buddy Operation Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub.
Check grease levels at a glance with the blue auto-check ring. Chrome plated Bearing Buddies maintain light grease pressure inside the hub to protect your bearings, even when submerged, while the zerk fitting makes adding grease quick and easy.Features: Replaces the grease cap in the axle hub Prevents wheel-bearing failure Keeps water and dirt out of hubs and bearings Allows boat trailer wheels to be completely submerged Stops corrosion and pitting on bearings Provides easily accessible grease fitting Makes adding grease to the bearings quick and simple Maintains slight, controlled pressure (3 psi) with spring-loaded piston, preventing water from entering hub Allows visual monitoring of grease levels with blue indicator ring Ring sits flush with top of cylinder when full If ring is below top, add grease to move piston outward 1/8" Prevents overfilling and rear seal damage with automatic pressure-relief feature Grease seeps around piston edges and into barrel when full Constructed of stainless steel internal parts and triple-chrome-plated steel barrel Ensures longer-lasting fit than plastic or aluminum products Includes rubber covers Installs easily Made in the USA Specs: Fits 2.717" hub bore Works with outer bearing models 14124 and 14125A Works with outer bearing cup (race) model 14276 Commonly found on 5,200-lb to 7,000-lb Dexter axles Lifetime warranty Bearing Buddy Operation Replace your existing grease cap with a Bearing Buddy for an easy way to monitor and maintain the grease level in your axle hub.
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. Durable steel construction with a powder coat finish to resist corrosion.Features: Power stabilizer jacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 78" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
Filters
