Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 9" Dimensions of bolster bracket: 8" tall x 2-1/2" wide Mounting slot dimensions: 2-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.Features: Heavy-duty bracket holds a bow stop to protect your winch Designed to fit around a 3-1/2" wide winch Can also be mounted alone on winch stand Accepts 3" - 4" bow roller or Y-stop Bolt-on installation Does not include mounting hardware Sturdy, 11-gauge pre-galvanized steel construction Can be primed and painted to provide even more resistance to corrosion and to match your trailer's paint finish Made in the USA Specs: Quantity: 1 bracket Dimensions: Height: 13-3/16" Inside width: 3-11/16" Outside width: 3-15/16" Typically found on winch stands mounted on trailer tongues, bow roller brackets position a bow roller or Y-stop in front of the winch to prevent the boat's bow from making contact with the winch.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. The included 85-degree and 95-degree brackets install on an angled or V-shaped boat trailer frame with 2 U-bolts (sold separately).Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 85-Degree and 95-degree angles are designed for vertical mounting onto angled or V-shaped boat trailer frames Ensures alignment of the bunk board mounting holes Requires (2) 1/2" diameter U-bolts (sold separately) for installation 3 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Overall dimensions: 85-Degree bracket dimensions: 6" tall x 5" wide 95-Degree bracket dimensions: 7" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/16" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 13" Dimensions of bolster bracket: 12" tall x 2-1/2" wide Mounting slot dimensions: 4-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). ... Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 90-Degree angle for vertical mounting onto level boat trailer frames (2) 1/2" Diameter U-bolts (sold separately) required for installation 4 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Dimensions: 8" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Create a fixed-position tie-down point on your boat trailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 30-degree mounting angle. Made of corrosion-resistant galvanized steel.Features: Creates a fixed-position tie-down on your trailer Bolts to trailer's frame, wall or floor Mounting hardware not included 30-Degree mounting angle accommodates most tie-down applications Constructed of galvanized steel - long-lasting and corrosion resistant Made in the USA Specs: Quantity: 1 bracket Length: 4" Width: 1-15/16" Small bolt hole diameter: 1/2" Large bolt hole diameter: 7/8" The 30-degree mounting angle of this bracket makes it simple to attach a rope or to hook up straps by spacing the anchor away from the wall or floor, proving easy access to the tie-down hole.
... Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolster bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolster brackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 3 Bolt holes for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 16-1/4" Dimensions of bolster bracket: 15" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-3/4" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Replace the bow roller assembly on your boat trailer with this durable polyvinyl chloride roller kit. Includes a 4" roller, 2 end bells, and corrosion-resistant hardware. Non-marring material will not leave marks on your boat.Features: Bow roller assembly replaces the bow roller, end bells, shaft, and hardware on your boat trailer Eases loading and unloading of your boat Supports the front of your boat as it rests on your trailer Absorbs road shock while your boat is being towed End bells ensure that your boat does not scrape along bolts or roller bracket Polyvinyl chloride (PVC) construction is durable, non-marring, and corrosion resistant Stronger and longer lasting than rubber Won't leave scratches, scuffs, or marks on your boat's hull Works great in freshwater and saltwater Zinc shaft and hardware with zinc finishes are corrosion resistant Amber color Specs: Application: 4" wide center roller bracket Dimensions (with bells): 8" long x 5-1/4" diameter Shaft diameter: 1/2" PVC Construction Polyvinyl chloride (PVC) is a sturdy material that is great for use on marine trailers.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 11" Dimensions of bolster bracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
These split roller brackets brace any size roller on your boat trailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Right- and left-hand brackets support a roller on your boat trailer Fit any length roller that has 5/8" diameter shaft Sturdy, 11-gauge, galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 pair Application: 4", 5", 8", 10", 12" and 18" long rollers Requires 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall These split panel brackets mount upright to a trailer's crossmember.
Galvanized steel swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that your boat's hull fits snugly during transport. ... Features: Heavy-duty swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 11-Gauge, galvanized steel construction is sturdy and resists corrosion Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-3/8" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: 2-1/2" apart on center Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This heavy-duty, galvanized steel swivel bracket attaches to your CESmith double U-bolt bolster bracket on your boat trailer and lets you tilt your bunk board to the proper angle. ... Features: Heavy-duty swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto the trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Ideal for use with CESmith double U-bolt bolster brackets (CE10190GA, CE10191GA, CE10192GA, and CE10196G - sold separately) 3 Bolt holes allow for a strong, sturdy connection to the bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 7-Gauge, galvanized steel construction is sturdy and resists corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-1/2" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Rust-resistant assemblies let you install 2 roller bunks on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allows you to install 2 roller bunks on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs on your boat trailer's frame with a single U-bolt (sold separately) Strong swivel brackets let you tilt the roller bunks Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 11" Dimensions of bolster bracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 1-1/4" long x 1-3/4" wide x 2" tall Top flange mounting hole diameter: 7/16" Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Replace the bow roller assembly on your boat trailer with this durable polyvinyl chloride roller kit. Includes a 3" roller, 2 end bells, and corrosion-resistant hardware. Non-marring material will not leave marks on your boat.Features: Bow roller assembly replaces the bow roller, end bells, shaft, and hardware on your boat trailer Eases loading and unloading of your boat Supports the front of your boat as it rests on your trailer Absorbs road shock while your boat is being towed End bells ensure that your boat does not scrape along bolts or roller bracket Polyvinyl chloride (PVC) construction is durable, non-marring, and corrosion resistant Stronger and longer lasting than rubber Won't leave scratches, scuffs, or marks on your boat's hull Works great in freshwater and saltwater Zinc shaft and hardware with zinc finishes are corrosion resistant Amber color Specs: Application: 3" wide center roller bracket Dimensions (with bells): 6" long x 4-1/8" diameter Shaft diameter: 1/2" PVC Construction Polyvinyl chloride (PVC) is a sturdy material that is great for use on marine trailers.
... Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolster bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolster brackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 3 Bolt holes allow for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 10-1/4" Dimensions of bolster bracket: 9-3/4" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-1/4" Vertical spacing between slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
This one-piece panel bracket braces a 12" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports a 12" roller on your boat trailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 12" rollers Accepts a 13" long x 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 10" apart on center Typically installed upright on the crossmembers of a boat trailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
This lightweight and corrosion-resistant aluminum swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that the boat's hull fits snugly during transport.Features: Swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 3 Bolt holes allow for a strong connection to the bunk board Aluminum construction is sturdy and offers superior corrosion resistance Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-1/2" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: Outer holes (center to center): 2-1/2" Inner holes (center to center): 1-1/4"
... Swivel bracket sold separately.Features: Bolster bracket lets you attach a swivel bracket (sold separately) for mounting a bunk board to your boat trailer 2 Brackets are required per bunk board (additional bracket sold separately) Extra-sturdy connection to trailer frame ensures support for the bunk board Bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bracket installs vertically on your boat trailer's frame 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Overall dimensions: 15" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-3/4" Swivel bracket mounting hole diameter: 1/2" Bolster brackets are typically mounted upright on a boat trailer's crossmembers.
V-wing bolster bracket supports the bunks on your pontoon boat trailer. Short bracket wings and deep cradle are great for narrow pontoons. Galvanized steel material is ideal for saltwater use.Features: Heavy-duty bracket allows you to mount 2 bunk boards on your pontoon boat trailer Mounts on your boat trailer's frame or crossmember Stabilizes bunk boards when at least 2 brackets are used (other bracket sold separately) Short bracket wings surround and stabilize narrow pontoons Deep cradle keeps your boat's pontoons from jostling side-to-side Slotted mounting hole allows for easy adjustment along frame during installation 11-Gauge, galvanized steel construction is sturdy and corrosion resistant Mounting hardware sold separately Made in the USA Specs: Quantity: 1 bracket Application: 4" wide bunk boards Maximum length: 11-3/4" Base length: 8-1/2" Maximum height: 5-1/8" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Durable, aluminum replacement bracket works with another 90-degree bracket (sold separately) to stabilize 1 end of an extra-large bunk board on your boat trailer. Installs on level trailer frames with a U-bolt (sold separately).Features: Replaces 1 damaged CESmith 90-degree, vertical bunk bracket on your trailer Stabilizes 1 end of the bunk board when used with additional bracket (sold separately) Requires 1/2" diameter U-bolt (sold separately) for installation Constructed of rustproof, corrosion-resistant aluminum Great for freshwater and saltwater use Made in the USA Specs: Quantity: 1 bracket Dimensions: 10" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Rustproof Aluminum Construction Aluminum offers excellent, long-term defense against rust and corrosion, making it great for saltwater applications.
This rustproof bolster bracket helps support 1 bunk board on your boat trailer when used with a swivel bracket (sold separately). Mounting slots allow for height adjustment. ... Features: Bolster bracket lets you attach a swivel bracket (sold separately) for mounting a bunk board on your boat trailer 2 Brackets are required per bunk board (additional bracket sold separately) Dimpled surface helps prevent the bracket from sliding along the trailer frame Mounting slots permit as much as 2-3/4" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Lightweight aluminum is rustproof and corrosion resistant Great for freshwater and saltwater use Made in the USA Specs: Quantity: 1 bracket Overall dimensions: 8" tall x 2-1/2" wide Mounting slot dimensions: 2-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Swivel bracket mounting hole diameter: 1/2" Bolster brackets are typically mounted upright on a boat trailer's crossmembers.
... Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolster bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolster brackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 3 Bolt holes for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 12-1/4" Dimensions of bolster bracket: 11-3/4" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-1/4" Horizontal spacing between slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
... Includes 2 brackets.Multiple holes in the brackets make it easy to adapt to the different heights of trailer frames and also to ensure that the roller will be mounted at the proper position.
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.Features: L-shape brackets accommodate a variety of different roller lengths Mount to your boat trailer's frame or tongue Sturdy, 7-gauge galvanized steel construction resists corrosion Made in the USA Specs: Application: 4", 5", 8", 10", 12" and 18" long rollers that take a 1/2" diameter shaft Diameter of mounting holes (each): 3/8" Quantity: 1 pair Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Filters
