Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
For your 2024 Jeep Grand Cherokee L only the #C96NR is a confirmed fit. The #C97JR fits some older models as well but it wasn't carried over for the 24 models.
view full answer...Yes, it sounds like your springs are too heavy duty which is making them nearly impossible to find the "sweet spot". Your current spring has a 160 lb capacity which for a lighter style of ramp spring we have the part #ERS120D81 that…
view full answer...Your trailer tire size F78-14st is an older tire size. The new label for that tire size is ST205/75D14. They are the same tire basically, but different size label. Your tire size is likely 14 inches instead of 15 inches because to measure the…
view full answer...Some factory OEM brake controllers are compatible only with electric drum trailer brakes and will not operate properly with an electric-over-hydraulic (EOH) trailer braking system. Other controllers may have the flexibility to work with both types…
view full answer...I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part #34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside…
view full answer...Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
view full answer...I have good news, our trailer jack that has a 2 inch outer diameter part #DL74MR would fit and work well. While it has a 1,000 lb weight capacity that does not mean 1,000 lb total trailer weight capacity. That capacity is the tongue weight capacity…
view full answer...You can absolutely wire up a 3-wire breakaway switch like the Hopkins LED Breakaway Switch with 7" Lead Wires #HM20059 to replace your 2-wire switch; the difference is that the 3-wire switch has a dedicated ground wire while the 2-wire switch…
view full answer...Yes, the etrailer brake assembly part #AKEBRK-7R-SA would work to replace a Dexter 023-327-00 which is a passenger side self adjusting brake assembly. The matching left hand side would be the part #AKEBRK-7L-SA.
view full answer...The best replacement microwave we have for your 2008 Dutchmen Victory Lane with the High Pointe EM925BSC is the Greystone Built-in Microwave with Trim Kit part #324-000105. The dimensions of this microwave without the trim kit is 19" wide x…
view full answer...First, we will want to determine where the problem is originating. The best place to start is at the vehicle. You will want to use a circuit tester, like #PTW2993, to test the trailer connector at the back of the vehicle, without the trailer hooked…
view full answer...Unlike costlier brands of trailer jack the entry-level Pro Series line is not supported with the same repair/replacement parts availability as with the upper tier sister brands like Bulldog and Fulton. The few parts we have available to us are shown…
view full answer...Filter Your Search
Contact and Help