15 Ton Combination Hitch combines both a ball hitch and pintle hook in one product. It allows you to pull loads that have either a coupler or a drawbar/pintle ring without having to change hitches.
Powder coated, carbon steel receiver tube bolts onto your cab and chassis truck's hitch plate to give you a 2-1/2" hitch for towing or mounting accessories. Fits standard pintle hook mounting hole spacing.
This combination ball mount lets you haul up to 20,000 lbs with either the pintle hook or the chrome-plated 2" ball. Just slide it into your 2-1/2" trailer hitch. Durable forged steel is powder coated to resist rust.
The bracket length of the Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors part #UF39-941705 is 36". It fits trailers and RVs with frames from 8" to 80" wide. The bracket length of the Ultra-Fab Power Twin II Electric…
We have checked with Bulldog in the past about the replacement options for the Bulldog A-Frame Jack part 1551060301 that you have and they were able to give us all of the information we need to offer you a solution. The best option we have is the…
I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…
The hole spacing of the Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange - 12" - Left/Right Hand Assemblies - 6K #23-105-106-09 is 3-1/8" between the top two holes, 3-3/8" between the top and bottom holes, and 2-1/2" between…
The Replacement Drum for M-3 Dual Ramp Springs - Right Hand #DRUM-M-3RH or the Replacement Drum for M-3 Dual Ramp Springs - Left Hand #DRUM-M-3LH is what you are seeking. You also want the Replacement Cables for Conventional Ramp Door Spring -…
To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…
I may have an option for you but mobile home axles are considered a one-time use only product and are not designed to be used on a standard trailer. Therefore, there are no hub conversion kits for them that will allow you to use standard…
The mounting holes on the B&W Pintle Hook Mounting Plate for 2-1/2" Hitches #BWPMHD14202 are 1-3/4" apart vertically and 3-3/8" apart horizontally. This measurement taken from center to center on the mounting holes.
Mobile home axles are designed for a one time use and do not have a load rating. You may be able to find hubs and drums and other hub components for the specific spindles you have on the axles but that can be very difficult as mobile home axles…
To replace the rotors of your disc brakes, the Kodiak #KR12D will work just fine as they are a standard 12-1/6" wide overall and have an inner diameter of 7-2/3" (where the hub sits). We don't have a dimensional drawing but as long as…
Weld and bolt this hitch onto your Ford or GM flatbed or flatbed dump truck for heavy-duty towing. Fits a 34" wide frame. Provides ICC bumper. Has (2) 3/4" D-rings for easy safety chain attachment.
Powder coated, carbon steel receiver tube bolts onto your cab and chassis truck's hitch plate to give you a 2" hitch for towing or mounting accessories. Fits standard pintle hook mounting hole spacing.
This convenient starter kit includes an 8-1/2" long, powder coated steel ball mount with a 2" diameter, chrome-plated, pre-torqued hitch ball and a hitch pin and clip. Slides into 2" square trailer hitches.
The bolt-on 45 Ton Pintle Hitch from Buyers Products is designed for heavy duty towing jobs. It is constructed of extremely strong austempered ductile iron, with a black powder-coated finish for ... : 90,000 lbs Maximum tongue weight: 18,000 lbs Drawbar eye inner diameter: 2-3/8"-3" The bolt-on 45 Ton Pintle Hook from Buyers Products is designed for heavy duty towing jobs. It is constructed of
30 Ton Heavy Duty Swivel Type Pintle Hook from Buyers Products features swivel action to reduce stress on towing mechanisms and allow for off-road and uneven terrain towing. The swivel action allows ...
Buyers Products 7-way to 4-way flat trailer connector adapter corrects a mismatch between your truck and trailer connectors by converting a 7-way round pin connector to a 4-way flat connector ...
Bolt and weld this heavy-duty hitch plate onto your truck to get a 2-1/2" tube for towing. Made to fit Ford F350, F450, and F550 cab and chassis trucks with 34" wide frames. Built-in, bottom-mounted ICC bumper provides underride protection.
Add a pintle setup to your dump truck with this heavy-duty hitch plate. Weld the plate to a 1-ton or heavier dump truck with a 34" frame to add a mounting point for a pintle hitch (sold separately). Includes gussets for added support.
Bolt-on 30 ton pintle hook features tough, drop-forged steel construction and a black powder coated finish for maximum durability and resistance to corrosion. Ideal for haulers of heavy equipment. Maximum gross towing weight of 60,000 lbs.
Filters
